Infratech WD-4024 BL
Infratech WD-4024 BL Dual Element Fixture User Manual
Model: WD-4024 BL | Brand: Infratech
Product Overview
The Infratech WD-4024 BL is a high-performance, dual-element electric radiant heater designed for both indoor and outdoor applications. This 4000-watt, 240-volt fixture provides efficient and comfortable heating, making it ideal for patios, garages, or other spaces requiring supplemental warmth. Constructed from durable 304 stainless steel, it offers longevity and a sleek black finish.
Key features include:
- Up to 90% energy efficient with zero emissions.
- Cost-effective, low maintenance operation.
- Durable 304 stainless steel construction.
- UL/CUL listed for Indoor / Outdoor use.
- Compatible with Infratech’s Duplex Stack Switch and Custom Control options.
Image: The Infratech WD-4024 BL dual element radiant heater in black finish, showing its full length and heating elements.
Safety Information
WARNING: Expert installation is required for this product. Please consult a licensed electrician for proper installation to ensure safety and compliance with local electrical codes.
- Do not operate the heater if it has been dropped or damaged in any manner.
- Do not use the heater in the immediate surroundings of a bath, a shower, or a swimming pool.
- Keep combustible materials at least 3 feet (0.9 meters) away from the heater.
- Ensure the power supply is disconnected before any maintenance or cleaning.
Setup and Installation
The Infratech WD-4024 BL heater is designed for permanent installation. Due to its electrical requirements and safety considerations, professional installation by a licensed electrician is mandatory.
Mounting Guidelines:
- The heater can be mounted on a wall or ceiling.
- Ensure adequate clearance from combustible surfaces as specified in the safety section.
- Refer to the detailed mounting height specifications for optimal performance and safety. Recommended mounting heights are 8 to 14 feet.
Image: Diagram showing the dimensions of the Infratech WD-4024 BL heater, including its 39-inch length and height/depth measurements.
Image: Close-up view of the Infratech heater's construction, highlighting 304 stainless steel, zero emissions, and recommended mounting heights of 8-14 feet.
Operating Instructions
Once properly installed by a licensed electrician, your Infratech WD-4024 BL heater is ready for operation. This heater is designed for simple and effective use.
Powering On/Off:
The heater is typically controlled via a dedicated wall switch or an Infratech control system (e.g., Duplex Stack Switch or Custom Control options). Flip the switch to the "ON" position to activate the heating elements. Flip to "OFF" to deactivate.
Heat Output:
The WD-4024 BL provides 4000 watts of radiant heat. For models compatible with variable control systems, refer to your control system's manual for adjusting heat intensity.
Image: An Infratech heater installed on a patio ceiling, providing warmth to a family enjoying an outdoor space.
Image: A person interacting with a control panel, illustrating the use of optional control systems for the heater.
Maintenance and Care
The Infratech WD-4024 BL heater is designed for low maintenance. Regular cleaning will help maintain its appearance and efficiency.
Cleaning:
- Ensure the heater is turned off and completely cool before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- For stainless steel surfaces, use a stainless steel cleaner to maintain its luster.
- Periodically inspect the heating elements for any debris or obstructions. Gently remove any buildup with a soft brush if necessary.
Storage:
If the heater will not be used for an extended period, ensure it is clean and dry. No special storage conditions are required beyond protecting it from extreme weather if installed outdoors.
Troubleshooting
This section provides solutions to common issues you might encounter with your Infratech heater. For problems not listed here, or if issues persist, contact a licensed electrician or Infratech customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply; tripped circuit breaker; faulty wiring; control system issue. | Check power source and circuit breaker. Verify wiring connections (consult electrician). Check control system settings. |
| Heater produces insufficient heat. | Incorrect mounting height; element failure; voltage issue. | Ensure mounting height is within recommended range (8-14 ft). Contact electrician to check elements and voltage. |
| Unusual odors or smoke. | Initial burn-off (new heater); dust/debris on elements; electrical fault. | A slight odor is normal for first use. Turn off and clean elements if dust is present. If odor persists or smoke is significant, immediately disconnect power and contact electrician. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Infratech |
| Model Number | WD-4024 BL |
| Heat Output | 4000 Watts |
| Voltage | 240 Volts |
| Color | Black |
| Material | 304 Stainless Steel |
| Product Dimensions | 39"D x 9.4"W x 8.2"H |
| Item Weight | 4.54 pounds |
| Indoor/Outdoor Usage | Indoor / Outdoor |
| Mounting Type | Wall / Ceiling Mount (Fixture) |
| Heating Coverage | 14 feet (approx.) |
| Special Feature | Energy Efficient |
| UPC | 810146733911 |
Warranty Information
Infratech provides an exclusive Three Year Warranty for components proudly made in the USA. This warranty covers defects in materials and workmanship under normal use and service.
For specific terms and conditions of the warranty, please refer to the official Infratech warranty document or contact customer support.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Infratech customer support.
You can visit the official Infratech website for more information and contact details:
Alternatively, consult the licensed electrician who installed your unit for immediate assistance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.