Introduction
This manual provides essential instructions for the safe and efficient operation of your GADPRO AIR 3 Portable Bluetooth Wireless Speaker. Please read this manual thoroughly before using the device and retain it for future reference.
Safety Information
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not attempt to disassemble or modify the speaker. This will void the warranty.
- Keep the speaker away from water and liquids. While it features splash protection, it is not fully waterproof.
- Use only the specified charging cable and power adapter.
Package Contents
The GADPRO AIR 3 speaker package typically includes:
- GADPRO AIR 3 Bluetooth Wireless Speaker
- USB Charging Cable (Type-C)
- User Manual (this document)
Note: Specific contents may vary. Please check the product packaging for exact details.
Product Overview
Familiarize yourself with the speaker's components and controls.
Image Description: This image displays the top and side view of the GADPRO AIR 3 speaker, highlighting its control panel. The top panel shows buttons labeled 'play/pause', 'Type C' (charging port), 'USB' (port), 'Input card' (slot), and 'off/on' (power switch). The side view points to 'Volume Up', 'Volume Down', and 'Mode' buttons. A colorful carry handle is visible on the side.
Setup
1. Charging the Speaker
- Locate the Type-C charging port on the speaker (refer to Product Overview).
- Connect the provided USB Type-C cable to the speaker's charging port.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. Charging time is approximately 3 hours.
- Once fully charged, the indicator light may change or turn off. Disconnect the speaker from the power source.
Image Description: This image displays the GADPRO AIR 3 speaker from the front, with key specifications overlaid. The text indicates "Charging time - 3H", "Working time - 2-4H", "Bluetooth version - 5.0", and "Battery capacity - 800mAh". The speaker itself is black with a mesh grille and a small logo.
2. Powering On/Off
- To power on, slide the 'off/on' switch to the 'on' position. You will hear an audible prompt.
- To power off, slide the 'off/on' switch to the 'off' position.
Operating
1. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode (it usually defaults to this mode upon power-on). A blue indicator light will flash, indicating it's ready for pairing.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "GADPRO AIR 3" from the list of found devices.
- Once paired, the speaker will emit an audible confirmation, and the blue indicator light will stop flashing and remain solid.
- The speaker will automatically connect to the last paired device when powered on, if that device's Bluetooth is active and within range.
2. Playing Audio
- After successful Bluetooth pairing, start playing audio from your connected device.
- Press the 'play/pause' button on the speaker to pause or resume playback.
3. Volume Control
- Press the 'Volume Up' button to increase the volume.
- Press the 'Volume Down' button to decrease the volume.
- You can also adjust the volume directly from your connected device.
4. Mode Selection
The speaker supports multiple input modes. Press the 'Mode' button to cycle through available modes:
- Bluetooth Mode: For wireless audio streaming.
- USB/Input Card Mode: Insert a USB drive or a compatible memory card into the respective port/slot to play audio files directly.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the speaker's surface. Do not use abrasive cleaners, alcohol, or chemical solvents.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted. | Charge the speaker for at least 3 hours. |
| Cannot pair via Bluetooth. | Bluetooth is not enabled on your device or speaker. Speaker is too far from the device. Speaker is already connected to another device. | Ensure Bluetooth is active on both devices. Move the speaker closer to your device. Disconnect from other devices or restart the speaker. |
| No sound. | Volume is too low. Speaker is not connected. Incorrect mode selected. | Increase volume on both speaker and connected device. Re-pair Bluetooth. Press the 'Mode' button to select the correct input. |
| Poor audio quality. | Device is too far from the speaker. Obstructions between devices. Low battery. | Move devices closer. Remove obstructions. Charge the speaker. |
Specifications
Image Description: This image shows the GADPRO AIR 3 portable Bluetooth speaker from a slightly elevated angle, centered on a circular grey platform against a blue gradient background. The speaker is black, cylindrical with a slightly tapered top, and features a colorful braided carry handle.
| Feature | Detail |
|---|---|
| Model Name | AIR 3 |
| Speaker Type | Portable Speaker |
| Connectivity Technology | Bluetooth (Version 5.0) |
| Speaker Maximum Output Power | 5 Watts |
| Battery Capacity | 800 mAh |
| Charging Time | Approximately 3 hours |
| Working Time (Playback) | 2-4 hours |
| Product Dimensions | 10D x 5W x 15H Centimeters |
| Item Weight | 280 Grams |
| Splash Proof | Yes (shields from light splashes) |
| Compatible Devices | Smartphone, Tablet, Laptop, Gaming Console, Desktop |
| Audio Output Mode | Stereo |
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer. Keep your proof of purchase for warranty claims.
Manufacturer: GUANGZHOU FURISI ELECTRONIC TECHNOLOGY CO LIMITED
