WILLED B0F4DHT8F6
WILLED Motion Sensor Under Cabinet Lights - Instruction Manual
Model: B0F4DHT8F6
Introduction
Thank you for choosing WILLED Motion Sensor Under Cabinet Lights. This manual provides essential information for the safe and efficient use of your new LED light bars. Please read these instructions thoroughly before installation and operation.
What's in the Box
Your package should contain the following items:
- 2 x Under Cabinet Lights
- 2 x USB C Charging Cables
- 2 x Adhesive Iron Sheets
- 1 x Instruction Manual
Setup
Initial Charging
For optimal performance, please fully charge the lights before first use. Connect the provided USB-C charging cable to the light and a 5V compliant charger or mobile power bank. The battery level display will show charging progress.
Video: Demonstrates the charging process and battery level display of the WILLED Under Cabinet Lights.
Installation
The WILLED Under Cabinet Lights offer versatile, tool-free installation:
- Magnetic Mounting: The lights have built-in strong magnets. If your desired surface is metallic (e.g., a refrigerator), simply attach the light directly.
- Adhesive Mounting: For non-metal surfaces (e.g., wood cabinets, walls), use the included adhesive iron sheets. Clean the surface thoroughly, peel off the protective film from the adhesive iron sheet, stick it firmly onto the desired location, and then magnetically attach the light bar to the iron sheet.
Image: Illustration of wireless under cabinet lighting installation using magnetic and adhesive methods.
Warm Tip:
- Do not install two motion sensor lights too close to each other, as the brightness of one may prevent the other from lighting up.
- Installing the light close to the edge of a surface can enhance motion detection sensitivity.
Operating Instructions
The light bar features multiple buttons for control:
- Power Button: Turns the light ON/OFF.
- Brightness Adjustment: Cycles through five dimming levels (10%, 30%, 50%, 70%, 100%).
- Color Temperature Adjustment: Cycles through three color temperatures: Warm White (3000K), Natural Light (4500K), and Cool White (6000K).
- Auto Mode Button: Activates the motion sensor mode.
Dual Operation Modes
- Motion-Sensing Mode (Auto Mode): When activated, the light turns on automatically in low-light conditions when human movement is detected within a 10 ft range and 120° angle. It will auto-off after 20 seconds if no further movement is detected. This mode is energy-saving.
- Always-On Mode: Provides continuous lighting for your needs.
Image: Visual representation of the motion sensor light in an indoor setting.
Brightness and Color Temperature
Adjust the brightness and color temperature to suit your environment and preference. The light offers 200 lumens of soft, glare-free illumination.
Video: Demonstrates the motion sensor functionality and various brightness/color temperature settings of the WILLED lights.
Maintenance
Cleaning
Wipe the light bar with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
Battery Care
The 1800mAh rechargeable battery provides reliable, cord-free lighting. A full charge takes approximately 1.5 hours. Battery life varies by mode and brightness:
- Up to 5 hours at maximum brightness (Always-On mode).
- Up to 40 hours at minimum brightness (Always-On mode).
- Extended duration in motion-sensing mode due to intermittent use.
The convenient battery level display helps you monitor the charge status.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on in motion-sensing mode. | Sufficient ambient light; motion sensor blocked; low battery. | Ensure the environment is dark enough; check if the motion sensor cover is clear; charge the battery. |
| Light does not charge. | Charging cable or adapter issue; light not properly connected. | Use a 5V compliant charger; ensure the USB-C cable is securely connected. |
| Motion sensor is too sensitive or not sensitive enough. | Placement of the light. | Adjust the light's position. Installing it closer to an edge can enhance sensitivity. |
Specifications
- Brand: WILLED
- Model Number: B0F4DHT8F6
- Color: Black
- Material: Plastic
- Power Source: Battery Powered (Rechargeable)
- Battery Capacity: 1800mAh
- Charging Voltage: 5V (DC)
- Light Source: LED (64 LED beads)
- Brightness: 200 Lumens (Adjustable: 10%-100%)
- Color Temperatures: Warm White (3000K), Natural Light (4500K), Cool White (6000K)
- Motion Sensor Angle: 120°
- Motion Sensor Distance: Up to 10 ft (3M)
- Auto-off Time: 20 seconds (in motion-sensing mode)
- Control Method: Push Button / Touch
- Mounting Type: Magnetic, Adhesive
- Item Dimensions (L x W x H): 9.84"L x 1.3"W x 0.75"H
- Water Resistance Level: Not Water Resistant
Warranty & Support
Your WILLED Motion Sensor Under Cabinet Lights are backed by a 12-month limited warranty. For any questions, concerns, or support needs, please do not hesitate to reach out to our 24/7 customer support team. Contact information can typically be found on the product packaging or through your purchase platform.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.