1. Introduction
Thank you for choosing the PULIVIA Visual Rotating Timer Model YS-1008. This instruction manual provides detailed information on the setup, operation, and maintenance of your new timer. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
2. Package Contents
- PULIVIA Visual Rotating Timer (Model YS-1008)
- USB Type-C Charging Cable
- User Manual
3. Product Overview
The PULIVIA Visual Rotating Timer is a versatile time management tool designed for various activities such as work, study, cooking, and breaks. It features gravity-sensing preset times, custom time settings, and visual countdown indicators.

Figure 1: Front view of the PULIVIA Visual Rotating Timer, displaying a digital countdown and an orange visual disk.

Figure 2: Illustration of the timer's gravity-sensing function, showing the four sides with preset times (5, 10, 25, 50 minutes) and how rotating it activates a countdown.

Figure 3: The timer's compact size is highlighted, along with instructions for pausing (screen upwards) and resetting (screen downwards). Dimensions are shown as 2 inches by 2 inches by 1.45 inches.

Figure 4: The timer's display features are shown, including indicators for low battery, charging status, mute mode, and the visual scale of the countdown.

Figure 5: The back panel of the timer, detailing the Type-C charging port, power on/off switch, buzzer mouth, and control buttons (SET, S for seconds, M for minutes, UP for positive timing mode/ringtone control).
4. Setup
4.1 Charging the Timer
The PULIVIA Visual Rotating Timer is equipped with a built-in 500mAh lithium battery and uses a Type-C charging port. Before first use, or when the low battery indicator appears (Figure 4), connect the provided USB Type-C cable to the timer and a compatible USB power source. The charging indicator (Figure 4) will illuminate during charging.
4.2 Power On/Off
Locate the ON/OFF switch on the back of the timer (Figure 5). Slide the switch to the 'ON' position to power on the device. To power off, slide the switch to the 'OFF' position.
5. Operating Instructions
5.1 Using Preset Countdown Times
The timer features four preset countdown times: 5, 10, 25, and 50 minutes. These are indicated on each side of the cube.
- Ensure the timer is powered on.
- To start a preset countdown, simply flip the timer so that the desired time (e.g., '25 MIN') is facing upwards. The timer will automatically begin counting down.
- The digital display will show the remaining time, and an orange visual disk will disappear counterclockwise, providing a clear visual representation of time passing.
5.2 Pausing and Resetting the Timer
- To Pause: Flip the timer so the screen is facing upwards. The countdown will pause.
- To Resume: Flip the timer back to the side with the active countdown.
- To Reset: Flip the timer so the screen is facing downwards. The timer will reset to zero.
5.3 Custom Countdown Time
You can set a custom countdown time between 00-99 minutes and 59 seconds.
- In non-timed mode (display showing 00:00), press the SET button on the back of the timer. The timer will emit a sound.
- Use the M button to adjust minutes and the S button to adjust seconds.
- Once the desired time is set, press the SET button again to confirm and start the custom countdown.

Figure 6: Visual guide for setting custom times, showing the display for positive timing mode and countdown mode, along with button functions.
5.4 Count-up Mode (Positive Timing)
The timer can also function as a stopwatch to count upwards.
- In non-timed mode, press the UP button to switch to positive timing mode. The timer will start counting upwards from 00:00.
- Press the UP key again to pause the count-up.
- To reset the count-up, flip the timer screen facing downwards.
5.5 Mute/Sound Alarm Settings
You can choose between a mute mode (visual flash) or an audible alarm.
- Locate the toggle switch on the back of the timer (Figure 5).
- Slide the switch to select either the mute mode (screen flashes for 1 minute) or the alarm-sound mode (beeps for 1 minute).

Figure 7: Depiction of the mute mode (screen flashes) versus sound alarm mode, illustrating different use cases like studying or cooking.
6. Maintenance
- Clean the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the timer to extreme temperatures, direct sunlight, or high humidity.
- Do not immerse the timer in water or any other liquids.
- Store the timer in a cool, dry place when not in use for extended periods.
7. Troubleshooting
7.1 Timer Not Turning On
- Check if the battery is charged. Connect the timer to a power source using the USB Type-C cable.
- Ensure the ON/OFF switch on the back is in the 'ON' position.
7.2 Countdown Not Starting Automatically
- Verify the timer is powered on.
- Ensure the timer is placed on a flat, stable surface with the desired preset time facing directly upwards.
7.3 Alarm Not Sounding
- Check the Mute/Sound switch on the back of the timer. Ensure it is set to the 'Sound' position.
7.4 Display Issues
- If the display is dim or unresponsive, recharge the battery.
- If the issue persists, contact customer support.
8. Specifications
| Model Number | YS-1008 |
| Brand | PULIVIA |
| Color | White |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 1.5"D x 2"W x 2"H |
| Item Weight | 2.12 ounces (60 Grams) |
| Number of Settings | 7 (4 preset, custom countdown, count-up, mute/sound) |
| Batteries | 1 Nonstandard Battery (included) |
| Manufacturer | ShenZhen YiSheng Technology Co., Ltd |
9. Warranty and Support
PULIVIA products are designed for quality and reliability. For any questions, technical support, or warranty inquiries, please contact our customer service team.
- Support Email: support@pulivia.com
- Please refer to your purchase documentation for specific warranty terms and conditions.