Product Overview
The Burrki Hand Massager is designed to provide targeted pain relief and relaxation for hands, wrists, and palms. It features deep-kneading shiatsu massage with upgraded rollers, mimicking professional acupressure. This device is ideal for alleviating stiffness from carpal tunnel, arthritis pain, and general hand fatigue experienced from activities like typing, crafting, or workouts.
Key features include adjustable heat therapy, multiple massage modes, and customizable intensity levels, all within a cordless and portable design for convenient use anywhere.
Figure 1: Burrki Hand Massager and its packaging.
Safety Information
Important Safety Warnings:
- Individuals with contagious skin conditions should not use the hand massager.
- Individuals with osteoporosis should not use the hand massager.
- Individuals with indisposed symptoms such as inflammation or blood stasis should not use the hand massager.
- Individuals who have undergone hand operations should not use the hand massager.
- Patients with heart diseases or those with active implants should not use the hand massager.
Setup
Charging the Device
Before the first use, ensure the Burrki Hand Massager is fully charged. The device cannot be turned on or used while it is charging. A full charge typically takes 3-4 hours. Always unplug the device after charging before turning it on for use.
Figure 2: Charging options for the hand massager, including power bank and wall plug.
Hand Placement
For optimal massage, aim the palm of your hand at the massage head when inserting your hand into the device. This ensures proper contact with the targeted kneading rollers.
Figure 3: Proper hand placement for effective kneading massage and all-round air compression.
Operating Instructions
Controls Overview
The control panel on the top of the device allows for easy customization of your massage experience.
Figure 4: Control panel with various settings for personalized customization.
Power On/Off
- To turn on the device, press and hold the Power button for approximately 2 seconds.
- To turn off the device, press and hold the Power button again for approximately 2 seconds.
Adjusting Settings
The Burrki Hand Massager offers multiple settings to tailor your massage:
- Mode (M): Select from 3 different massage modes to vary the massage pattern.
- Intensity: Choose from 3 intensity levels (low, medium, high) for the air compression massage.
- Heat: Activate heat therapy with 3 adjustable levels, ranging from 104℉ to 122℉ (40℃ to 50℃). Heat helps soothe cold, stiff hands and improve circulation.
- Shiatsu: Select from 2 shiatsu kneading levels to control the intensity of the targeted palm kneading rollers.
For first-time users, it is recommended to begin with the lowest settings for both intensity and shiatsu, and gradually increase them to your preferred comfort level.
The device has a default automatic shut-off time of 15 minutes for safety and convenience.
Figure 5: The hand massager provides 3 levels of heat therapy for soothing relief.
Maintenance
Cleaning
To clean the exterior of the hand massager, wipe it gently with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water. Ensure the device is powered off and unplugged before cleaning.
Storage
Store the hand massager in a cool, dry place away from direct sunlight and extreme temperatures. Keep it out of reach of children and pets. When not in use for extended periods, ensure it is fully charged before storing to maintain battery health.
Troubleshooting
If you encounter any issues with your Burrki Hand Massager, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or not charged. | Ensure the device is fully charged. Remember it cannot be used while charging. |
| Massage intensity feels too weak/strong. | Incorrect intensity setting. | Adjust the Intensity and Shiatsu levels using the control panel. Start with the lowest setting and increase gradually. |
| Heat function is not working. | Heat setting is off or too low. | Press the Heat button to cycle through the 3 heat levels. Ensure the desired heat level is selected. |
| Device stops unexpectedly. | Automatic shut-off activated. | This is normal. The device has a 15-minute auto shut-off. You can restart it if desired. |
If the problem persists after attempting these solutions, please contact Burrki customer support for further assistance.
Specifications
- Model Number: BK-hand-001
- Product Dimensions: 8.5 x 6 x 11.5 inches
- Item Weight: 3 Pounds
- Power Source: Battery Powered (1 D battery included)
- Material: Plastic
- Manufacturer: Burrki
- Battery Life (Approx.): 170 minutes on Low setting, 105 minutes on High setting
Figure 6: Dimensions and portability features of the hand massager.
Warranty and Support
For warranty information, product support, or to explore other products from Burrki, please visit the official Burrki Store.