Introduction
Thank you for choosing the EZVALO Wireless Rechargeable Vanity Light. This manual provides detailed instructions for the safe and efficient use of your new vanity light. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Important Safety Information
- Do not expose the device to extreme temperatures or humidity.
- Keep out of reach of children.
- Do not attempt to disassemble or repair the light yourself. Contact qualified personnel for service.
- Use only the provided charging cable or a certified USB-C cable for charging.
- Ensure the mounting surface is clean and dry before installation.
Package Contents
Please check the package for the following items:
- EZVALO Wireless Rechargeable Vanity Light (2 units)
- Mounting Bases (2 units)
- USB Charging Cables (2 units)
- Mounting Screws (6 units)
- Instruction Manual (1 unit)

Image: Package contents including two vanity lights, mounting bases, charging cables, and screws.
Product Overview
The EZVALO Wireless Rechargeable Vanity Light features a sleek design with intuitive controls and versatile lighting options. It is designed for easy installation and portability.
Key Features:
- Wireless and Rechargeable: Equipped with a 4000mAh battery for cordless operation.
- Three Color Modes: Offers Cool (6500K), Natural (4500K), and Warm (3000K) lighting.
- Stepless Dimming: Adjustable brightness from 10% to 100% with memory function.
- High Color Rendering Index (CRI > 92): Ensures accurate color representation.
- Adjustable Angle: Magnetic base allows for flexible light positioning.
- Easy Installation: Two methods available: adhesive tape or screws.

Image: Two EZVALO vanity lights showing their magnetic attachment to the bases.

Image: Detailed diagram of the light's operation controls, including the rear power switch, charging port, color mode switch, and front touch sensor.
Installation Instructions
The EZVALO Vanity Light offers two installation methods: adhesive mounting or screw mounting.
Method 1: Adhesive Mounting (No Tools Required)
- Prepare Surface: Clean and dry the desired mounting surface (e.g., mirror, vanity desk).
- Apply Base: Peel off the protective film from the 3M adhesive tape on the back of the mounting base.
- Attach Base: Firmly press the mounting base onto the cleaned surface for at least 30 seconds.
- Mount Light: Align the vanity light with the magnetic base and attach it. The magnetic connection allows for angle adjustment.

Image: Visual guide for adhesive installation, showing the three steps: tear off adhesive tape, stick on base, and attach the light magnetically.
Method 2: Screw Mounting (Optional)
- Mark Positions: Hold the mounting base against the desired surface and mark the screw hole positions.
- Drill Holes: Drill pilot holes at the marked positions (if necessary for the surface material).
- Secure Base: Use the provided screws to securely fasten the mounting base to the surface.
- Mount Light: Align the vanity light with the magnetic base and attach it.

Image: Illustration of both adhesive and screw installation methods for the vanity light.
Operating Instructions
Ensure the light is charged before first use. Refer to the "Charging" section for details.
Power On/Off:
- Locate the main power switch on the back of the light. Ensure it is in the "ON" position for touch controls to function.
- Short-tap the touch button on the front of the light to turn it ON or OFF.
Adjusting Brightness (Stepless Dimming):
- With the light ON, long-press the touch button on the front. The brightness will smoothly adjust between 10% and 100%. Release the button when the desired brightness is reached.
- The light features a memory function, recalling your last brightness setting upon next activation.

Image: Demonstration of stepless dimming, showing brightness levels from 25% to 100% and the action of long-pressing the touch button.
Changing Color Modes:
- Locate the color mode switch on the back of the light.
- Toggle this switch to cycle through the three available color temperatures:
- Cool Light (6500K): Bright, salon-like illumination for precise tasks.
- Natural Light (4500K): Simulates natural sunlight for daily use and skincare.
- Warm Light (3000K): Soft, relaxing glow for evening routines.

Image: Visual representation of the three color modes: Warm Light (3000K), Natural Light (4500K), and Cool Light (6500K).

Image: Comparison showing the difference between low CRI and high CRI (>92) lighting for accurate color rendering.
Charging the Vanity Light
The EZVALO Vanity Light is equipped with a 4000mAh rechargeable battery, providing up to 5 hours of continuous use on a full charge.
- Connect the provided USB charging cable to the charging port on the back of the light.
- Connect the other end of the USB cable to a standard USB power adapter (not included) or a computer USB port.
- The indicator light will turn red while charging.
- The indicator light will turn green when the battery is fully charged.

Image: The vanity light connected to a USB-C cable, showing the charging indicator light (red for charging, green for fully charged).
Care and Maintenance
- Cleaning: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the light in a cool, dry place when not in use for extended periods.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the light regularly, even if not in constant use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Main power switch is OFF. Battery is depleted. | Ensure the main power switch on the back is ON. Charge the light using the provided USB cable. |
| Touch control is unresponsive. | Main power switch is OFF. | Verify the main power switch on the back of the light is in the ON position. |
| Light does not dim or change color modes. | Incorrect operation. | For dimming, long-press the front touch button. For color modes, use the switch on the back. |
| Light falls off after adhesive installation. | Surface was not clean/dry. Insufficient pressure during installation. | Clean and dry the surface thoroughly. Apply firm pressure for at least 30 seconds. Consider using the screw mounting method for a more permanent fix. |
Specifications
- Model: VL01
- Brand: EZVALO
- Material: Plastic
- Dimensions: 10.55" L x 1.65" W x 2.12" H
- Power Source: Battery Powered
- Battery Type: Lithium Ion
- Battery Capacity: 4000mAh
- Battery Life: Up to 5 hours (continuous use)
- Light Source: LED (78 units)
- Brightness: Max 300 Lumens
- Color Temperatures: 3000K (Warm), 4500K (Natural), 6500K (Cool)
- Dimming: Stepless (10%-100%)
- Control Method: Touch
- Color Rendering Index (CRI): >92
- Mounting Type: Wall Mount (Adhesive or Screws)
- Weight: Approximately 1 Pound (per unit)
Warranty Information
For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official EZVALO website.
Customer Support
If you have any questions, concerns, or require technical assistance, please contact EZVALO customer support through the following channels:
- Website: Visit the EZVALO Store on Amazon
- Email: Refer to product packaging or official website for contact email.
- Phone: Refer to product packaging or official website for contact number.