Introduction
Thank you for choosing the DEWENWILS Wireless Remote Control Outlet with Timer. This device provides convenient wireless control and timed shut-off for your indoor appliances, enhancing energy efficiency and ease of use. Please read this manual thoroughly before operation to ensure safe and optimal performance.
Safety Information
- For indoor use only. Do not expose to water or damp conditions.
- Do not exceed the maximum load rating of 15A, 1875W.
- Ensure the outlet is fully inserted into a standard 125V AC, 60Hz wall receptacle.
- Do not disassemble or attempt to repair the device. Contact customer support for assistance.
- Keep out of reach of children.
- Unplug the device from the wall outlet before cleaning.
Package Contents
- 1 x Wireless Remote Control Outlet
- 1 x Remote Control (with CR2032 battery included)
- 1 x Wall Mount Bracket for Remote
- 1 x User Manual

Image: The package contents including the wireless remote control outlet, the remote control with its various timer buttons, and a wall mount bracket.
Product Overview
The DEWENWILS Wireless Remote Control Outlet system consists of two main components:
1. Wireless Remote Control Outlet
- Power Indicator: A small LED light on the outlet indicates its power status.
- Manual ON/OFF Button: Allows you to manually turn the connected appliance on or off directly from the outlet.
- Standard 3-Prong Outlet: For connecting your appliance.
2. Remote Control
- ON/OFF Buttons: For immediate power control.
- Countdown Timer Buttons: Preset options for 5 Min, 10 Min, 15 Min, 30 Min, 45 Min, 60 Min, 2H, 4H, 6H, 8H.
- RF Signal: Operates on a 433.92MHz frequency, providing a range of up to 100 feet in open areas.
Setup
- Insert Remote Battery: The remote control comes with a CR2032 battery pre-installed. If needed, remove the battery tab or replace the battery.
- Plug in the Outlet: Insert the DEWENWILS Wireless Remote Control Outlet into any standard 3-prong wall outlet.
- Connect Appliance: Plug your desired appliance into the remote control outlet.
- Initial Pairing (Pre-programmed): The remote and outlet are pre-programmed for immediate use. No additional pairing steps are typically required. If re-pairing is needed, refer to the Troubleshooting section.

Image: An illustration showing the simple plug-and-play setup, with the outlet plugged into a wall and an appliance connected, ready for remote control.
Operating Instructions
Manual Control (Remote)
- Press the ON button on the remote to turn on the connected appliance.
- Press the OFF button on the remote to turn off the connected appliance.
Manual Control (Outlet)
- Press the small button on the side of the outlet to manually toggle the power ON or OFF.
Countdown Timer Function
The remote offers 8 preset countdown options for automatic shut-off:
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 30 Minutes
- 45 Minutes
- 60 Minutes
- 2 Hours
- 4 Hours
- 6 Hours
- 8 Hours
To activate a countdown timer:
- Ensure the appliance is plugged into the remote control outlet.
- Press the desired countdown button (e.g., 15 Min) on the remote. The appliance will turn on (if off) and remain on for the selected duration, then automatically shut off.
- To cancel an active countdown, press the OFF button on the remote.

Image: The remote control displaying its various countdown timer buttons, ranging from 5 minutes to 8 hours, alongside the outlet in use.

Image: A visual representation of the automatic shut-off feature, showing a lamp connected to the outlet turning off after a set timer.
Key Features
- 100FT RF Remote Range: The strong 433.92MHz RF signal allows control up to 100 feet in open areas, even passing through walls and doors without interference.
- Space-Saving Design: The compact design of the outlet ensures it does not block adjacent wall outlets.
- Versatile Application: Ideal for controlling various indoor appliances such as lamps, fans, coffee makers, holiday lights, heaters, and more.

Image: A diagram illustrating the 100-foot RF remote control range, showing the signal passing through multiple rooms in a house.

Image: A close-up view of the compact outlet plugged into a wall, with dimensions indicating its small size and how it leaves other outlets accessible.
Maintenance
- Clean the device with a dry, soft cloth. Do not use liquid cleaners or sprays.
- Replace the CR2032 battery in the remote control when its range decreases or it stops responding.
- Store the device in a cool, dry place when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn ON/OFF with remote. |
|
|
| Reduced remote control range. |
|
|
| Countdown timer does not activate or stops prematurely. |
|
|
Re-pairing Instructions
If the remote and outlet lose connection, follow these steps to re-pair them:
- Plug the remote control outlet into a wall receptacle.
- Press and hold the manual ON/OFF button on the side of the outlet for approximately 3 seconds until the indicator light begins to flash slowly.
- While the indicator light is flashing, press the ON button on the remote control.
- The indicator light on the outlet will stop flashing and remain solid, indicating successful pairing.
- Test the remote control to ensure functionality.
Specifications
| Model Number | CLY801R+IT106 |
| Voltage | 125V AC, 60Hz |
| Max Load | 15A / 1875W Resistive |
| RF Frequency | 433.92MHz |
| Remote Range | Up to 100 feet (open area) |
| Remote Battery | 1 x CR2032 (included) |
| Dimensions (Outlet) | 5.08 x 3.07 x 1.46 inches (approximate) |
| Certifications | FCC Listed |
Warranty and Support
DEWENWILS products are designed for reliability and performance. For warranty information or technical support, please visit the official DEWENWILS website or contact their customer service directly. Please have your model number (CLY801R+IT106) and purchase details ready when contacting support.
Website: Visit the DEWENWILS Store on Amazon