1. Introduction
Thank you for purchasing the Generisch jiangboyue-4015522 Fabric Recliner. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new recliner. Please read this manual thoroughly before assembly and use, and keep it for future reference.

Figure 1.1: The Generisch jiangboyue-4015522 Fabric Recliner in light grey.
This image shows the light grey fabric recliner positioned in a modern living room, next to a floor lamp and a small side table, highlighting its aesthetic appeal and comfortable design.
2. Safety Instructions
To ensure safe operation and prevent injury or damage, please adhere to the following safety guidelines:
- Always assemble the recliner on a soft, clean surface to prevent scratches and damage.
- Ensure all bolts and screws are securely tightened before using the recliner. Periodically check and re-tighten them.
- Do not allow children to play on or around the recliner unsupervised, especially during reclining operations.
- Keep hands and feet clear of the reclining mechanism to avoid pinching.
- Do not exceed the maximum load capacity of 110 kg (242 lbs).
- Avoid standing on the recliner or using it as a step stool.
- Do not place hot items directly on the fabric.
- If any parts are missing or damaged, do not attempt to assemble or use the recliner. Contact customer support immediately.
3. Package Contents
Before beginning assembly, please verify that all components are present and undamaged. The package should contain the following items:
- Backrest (1)
- Seat Base with Armrests (1)
- Footrest Assembly (1)
- Legs/Feet (4)
- Hardware Pack (Screws, Washers, Allen Key) (1)

Figure 3.1: Exploded view and key features of the recliner.
This diagram illustrates the main components of the recliner, including the backrest, seat, armrests, and the manual reclining handle, providing a visual guide to the parts.
4. Setup and Assembly
Assembly is required for this recliner. Please follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface (e.g., a carpet or blanket) to prevent damage.
- Attach Legs: Locate the four legs and attach them to the designated points on the underside of the seat base. Ensure they are securely fastened using the provided screws and Allen key.
- Connect Backrest: Align the metal brackets on the backrest with the corresponding slots on the seat base. Slide the backrest down firmly until it clicks into place. You may need to apply gentle pressure.
- Secure Backrest: If there are additional locking mechanisms or screws for the backrest, secure them as per the hardware pack instructions.
- Final Check: Once assembled, gently rock the recliner to ensure stability. Check all connections to confirm they are tight and secure.
Note: It is recommended to have two people for assembly to ensure ease and safety.
5. Operating Instructions
The Generisch jiangboyue-4015522 recliner features a manual reclining mechanism for optimal comfort.
5.1 Reclining the Chair
- Locate Handle: The manual reclining handle is located on the right side of the recliner (when seated).
- Engage Recline: Pull the handle outwards to release the footrest and initiate the reclining motion.
- Adjust Position: Lean back gently to recline the backrest to your desired angle, up to 135 degrees. The footrest will simultaneously extend. You can stop at any comfortable position.

Figure 5.1: Detail of the manual reclining handle.
This image provides a close-up view of the black manual handle located on the right side of the recliner, which is used to activate the reclining function.
5.2 Returning to Upright Position
- To return to the upright position, gently push the footrest down with your legs while simultaneously leaning forward. The backrest will return to its original position.
- Ensure the footrest is fully locked into the closed position before exiting the chair.

Figure 5.2: Reclining positions.
This visual guide demonstrates the various reclining stages of the chair, from upright to fully reclined, showing the movement of both the backrest and the footrest.
6. Maintenance and Care
Proper care will extend the life and appearance of your recliner:
- Fabric Care: For general cleaning, vacuum the fabric regularly using an upholstery attachment to remove dust and debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, use a mild fabric cleaner specifically designed for polyester, testing on an inconspicuous area first.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fabric fading. Position the recliner away from direct sunlight or use curtains/blinds.
- Mechanism Care: The reclining mechanism is designed for long-term use. Avoid forcing the mechanism. If it becomes stiff, a small amount of silicone-based lubricant can be applied to moving parts (avoiding fabric).
- Periodic Checks: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary.
7. Troubleshooting
If you encounter any issues with your recliner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not recline smoothly. | Mechanism obstruction or loose connections. | Check for any objects obstructing the mechanism. Ensure all assembly bolts are tight. Apply silicone lubricant to moving parts if needed. |
| Footrest does not stay extended. | Mechanism not fully engaged or worn spring. | Ensure you are leaning back sufficiently to engage the full recline. If the issue persists, contact customer support. |
| Chair feels wobbly. | Loose legs or assembly connections. | Check and re-tighten all leg and backrest assembly bolts. Ensure the chair is on a flat, even surface. |
| Fabric appears stained or dirty. | Accumulated dirt or spills. | Refer to the "Maintenance and Care" section for cleaning instructions. |
8. Specifications
Detailed specifications for the Generisch jiangboyue-4015522 Fabric Recliner:
- Model: jiangboyue-4015522
- Color: Light Grey
- Material: Fabric (100% polyester), Metal, Plywood
- Filling Material: Foam, Polypropylene Fiber
- Dimensions (Seated Position): 66 cm (W) x 88 cm (D) x 95 cm (H)
- Dimensions (Reclined Position): 66 cm (W) x 144 cm (D) x 76.5 cm (H)
- Seat Width: 50 cm
- Seat Depth: 55.5 cm
- Seat Height from Floor: 42 - 44.5 cm
- Armrest Height from Floor: 55.5 cm
- Maximum Load Capacity: 110 kg (242 lbs)
- Assembly Required: Yes
9. Warranty and Support
For warranty information or technical support, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.
If you have any questions or require assistance, please contact Generisch customer service through the contact information provided at the point of purchase or on the official Generisch website.