MAIWO M.2 SATA to 2.5'' 3.5'' SATA Enclosure with Offline Clone (MAIWO-K10635S) User Manual

1. Introduction

This manual provides detailed instructions for the MAIWO M.2 SATA to 2.5'' 3.5'' SATA Enclosure with Offline Clone (MAIWO-K10635S). This device allows you to convert an M.2 SATA SSD into a standard 2.5-inch or 3.5-inch SATA drive, enabling data transfer and offline cloning capabilities. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.

2. Safety Information

• Keep the device away from water, moisture, and extreme temperatures.
• Do not attempt to disassemble or modify the device. This will void the warranty.
• Use only the provided power adapter. Using an incorrect power adapter may damage the device.
• Handle hard drives and SSDs with care to avoid static discharge or physical damage.
• Ensure proper ventilation to prevent overheating during operation.

3. Package Contents

Verify that all items are present in your package:

• 1x MAIWO M.2 SATA to 2.5 3.5 SATA Enclosure
• 1x USB C cable
• 1x Power Adapter (not explicitly listed but implied by images and functionality)
• User Manual (this document)

4. Product Overview

The MAIWO-K10635S is designed for versatility, supporting various M.2 SATA SSD sizes and standard SATA drives. It features both data transfer and standalone offline cloning capabilities.

4.1 Compatible Drives

This device supports M.2 SATA B+M Key SSDs in sizes 2230, 2242, 2260, and 2280. It also accommodates standard 2.5-inch and 3.5-inch SATA HDDs/SSDs.

Figure 4.1: Compatible M.2 SATA SSDs and 2.5"/3.5" SATA Drives. The image displays various M.2 SATA SSDs with different lengths (2230, 2242, 2260, 2280) and their B+M key interface, alongside a 3.5-inch HDD and a 2.5-inch SSD, illustrating the types of storage devices compatible with the enclosure.

4.2 Device Components

Familiarize yourself with the ports, buttons, and indicators on your MAIWO-K10635S enclosure.

Figure 4.2a: Top View of the Enclosure. This image shows the top of the enclosure with markings for M.2 SATA SSD lengths (2230, 2242, 2260, 2280) and the SATA B+M Key connector. It also highlights the 3.5"/2.5" SATA connector slot.

Figure 4.2b: Side View of the Enclosure. This image details the side panel of the enclosure, indicating the DC 12V power input, Power light, HDD/SSD indicator, Type-C data port, Power button, Clone button, and Clone progress lights (25%, 50%, 75%, 100%).

5. Setup Instructions

5.1 Installing Drives

1. Insert 3.5"/2.5" SATA Drive: Gently slide your 3.5-inch or 2.5-inch SATA HDD/SSD into the designated SATA connector slot on the enclosure. Ensure it is firmly seated.
2. Insert M.2 SATA SSD: Insert your M.2 SATA B+M Key SSD into the M.2 slot. Secure it by spinning the silicon cork to fix the M.2 hard drive in place.

Figure 5.1: Drive Installation Steps. This image illustrates the process of inserting a 3.5"/2.5" SATA drive and an M.2 SATA SSD into the enclosure, including securing the M.2 drive with a silicon cork.

5.2 Connecting to Power and Computer

1. Connect Power: Plug the provided 12V-3A power adapter into the DC 12V port on the enclosure and then into a power outlet.
2. Connect to Computer: Connect the enclosure to your computer using the supplied USB-C cable. Use the Type-C port on the enclosure for data connection to your PC.

Figure 5.2: Power and Data Connection. The image displays the enclosure connected to a laptop via a USB-C cable and receiving power from a 12V-3A power adapter plugged into a wall socket, ensuring stable operation.

6. Operating Instructions

6.1 Read and Write Function (External Enclosure Mode)

Once connected to your computer, the installed M.2 SATA SSD and/or 2.5"/3.5" SATA drive will appear as external storage devices. You can perform data read and write operations at speeds up to 5Gbps via the USB 3.0 Type-C interface.

1. Ensure drives are correctly installed and the device is powered on.
2. Connect the enclosure to your computer via the USB-C cable.
3. The drives will be detected by your operating system (Windows, macOS, Linux, Android, iOS are compatible).
4. You can now access, transfer, and manage files on the installed drives.

Figure 6.1: Read and Write Functionality. This image illustrates the enclosure connected to a laptop, highlighting its capability to simultaneously read and write data to both an M.2 SATA SSD and a 2.5"/3.5" SATA HDD/SSD, with data transfer speeds up to 5Gbps.

6.2 Offline Clone Function

The MAIWO-K10635S supports standalone offline cloning from an M.2 SATA SSD to a 2.5"/3.5" SATA HDD/SSD without needing a computer connection. Important: Back up all data on the target drive before cloning, as it will be overwritten.

1. Prepare Drives: Insert the M.2 SATA SSD (source drive) into the M.2 slot and the 2.5"/3.5" SATA HDD/SSD (target drive) into the SATA slot.
2. Connect Power: Connect the power adapter to the enclosure and a power outlet. Do NOT connect the USB-C data cable to a computer for offline cloning.
3. Power On: Turn on the power switch. The power light and both drive indicator lights (HDD/SSD) should illuminate.
4. Initiate Clone: Press and hold the Clone button for approximately 5 seconds until the clone progress LEDs (25%, 50%, 75%, 100%) start flashing.
5. Confirm Clone: Release the Clone button, wait for about 1 second, and then press the Clone button once more. The cloning process will begin, and the progress lights will illuminate in sequence.
6. Completion: The cloning process is complete when all four clone progress lights (25%, 50%, 75%, 100%) stay illuminated without flashing.

Figure 6.2: Offline Clone Operation Steps. This image provides a visual guide to the offline cloning process, showing the power and clone buttons, LED indicators, and the sequence of operations to successfully clone data from an M.2 SATA SSD to a 2.5"/3.5" SATA drive.

6.3 LED Indicators

The enclosure features several LED indicators to provide status information:

• Power Light: Blue light, indicates the device is powered on.
• HDD/SSD Indicator: White light, flashes during read/write operations and cloning.
• Clone Progress Lights (25%, 50%, 75%, 100%): Blue lights, illuminate sequentially during cloning. All four staying on indicates clone completion.

Figure 6.3: LED Indicator Guide. This image provides a clear explanation of the LED indicators on the enclosure: the blue Power light, the white HDD/SSD indicator that flashes during activity, and the blue Clone progress lights that show the cloning status.

7. Maintenance

• Keep the device clean by wiping it with a soft, dry cloth.
• Avoid blocking ventilation holes to ensure proper airflow.
• Store the device in a cool, dry place when not in use.
• Regularly check cables for any signs of wear or damage.

8. Troubleshooting

• Device not recognized by computer:
  • Ensure the USB-C cable is securely connected to both the enclosure and the computer.
  • Try a different USB port on your computer.
  • Verify the power adapter is connected and the device is powered on.
  • Check if the M.2 SATA SSD or SATA drive is properly seated in its slot.
• Drives not appearing in 'My Computer'/'Finder':
  • For new drives, they may need to be initialized and formatted in Disk Management (Windows) or Disk Utility (macOS).
  • Ensure the drive is healthy and functional.
• Offline clone not starting or failing:
  • Ensure the USB-C data cable is disconnected from the computer during offline cloning.
  • Verify that the source M.2 SATA SSD and target 2.5"/3.5" SATA drive are correctly inserted.
  • The target drive must be equal to or larger in capacity than the source drive.
  • Follow the clone initiation steps precisely (press and hold, then release and press again).
• Slow data transfer speeds:
  • Ensure you are connected to a USB 3.0 (or higher) port on your computer.
  • Check the quality of the USB-C cable.
  • The actual speed may vary depending on the performance of your SSD/HDD and your computer's system.

9. Specifications

10. Warranty and Support

The MAIWO-K10635S comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For technical support, troubleshooting assistance, or warranty claims, please contact MAIWO customer service through the retailer where you purchased the product or visit the official MAIWO website for contact information.

Please retain your proof of purchase for warranty validation.