WLIVE ASNG138 4-Drawer Dresser Instruction Manual

Introduction

Thank you for choosing the WLIVE ASNG138 4-Drawer Dresser. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Important Safety Information

• Always assemble the dresser on a soft, clean surface to prevent scratches.
• Ensure all parts and hardware are present before beginning assembly.
• Do not overtighten screws during assembly.
• For safety, always install the anti-tipping device provided to secure the dresser to a wall. This prevents accidental tipping, especially important in households with children or pets.
• Do not allow children to climb on or play with the dresser.
• Distribute weight evenly in drawers to maintain stability.

Parts and Hardware List

Before assembly, verify that all components listed below are included in your package. Refer to the assembly video for visual identification of each part.

The assembly video above illustrates the complete parts list and step-by-step assembly process. Please pause and review as needed.

Assembly Instructions

Follow these steps carefully to assemble your WLIVE ASNG138 4-Drawer Dresser. It is recommended to have two people for assembly.

Step 1: Prepare the Base Frame

Begin by attaching the base supports to the bottom panel of the dresser. Ensure they are securely fastened to provide a stable foundation.

Image: Close-up of the dresser's stable base supports. These supports ensure the dresser remains level and sturdy on various floor surfaces.

Step 2: Construct the Main Frame

Assemble the side panels and back panel to form the main body of the dresser. Use the provided hardware to connect these components firmly. Pay attention to the orientation of each panel as indicated in the detailed instructions.

Step 3: Install Drawer Glides

Attach the smooth metal glide rails to the interior sides of the dresser frame. These rails are essential for the smooth operation of the drawers.

Image: Detail of the smooth metal glide rail system for the drawers. This system ensures effortless opening and closing.

Step 4: Assemble Drawers

Assemble each of the four drawers individually. Attach the front, back, and side panels, then insert the bottom panel. Finally, attach the metal handles to the front of each drawer.

Image: Close-up of the wide, elegant metal handle on a dresser drawer. These handles are designed for comfortable use and durability.

Note: The bottom panels of the drawers are designed for standard clothing and household items. Avoid placing excessively heavy items in the drawers to prevent damage. Each drawer can hold up to 22 lbs.

Step 5: Install Anti-Tipping Device

This is a critical safety step. Secure the anti-tipping device to the back of the dresser and then to a wall stud using the provided hardware. This device is essential to prevent the dresser from tipping over, especially when drawers are open or if children attempt to climb it.

Image: Diagram illustrating the correct installation of the anti-tipping device. A green checkmark indicates correct installation, while a red cross shows an unstable dresser without the device.

Image: Close-up view of the anti-tip device securing the dresser to the wall. This device is crucial for preventing accidental tipping.

Operating Instructions

Drawer Usage

The four drawers are designed for smooth operation. Pull the metal handles gently to open and push to close. Avoid forcing the drawers, especially if they feel stiff. Ensure items are not obstructing the drawer's path or overfilling the drawer, which could hinder smooth movement.

Image: Visual representation of the dresser's storage capacity for various items like toys, diapers, socks, snacks, stationery, and clothes.

Weight Capacity

• Each drawer can hold up to 22 lbs.
• The top surface of the dresser can hold up to 88 lbs.

Distribute weight evenly across the drawers and the top surface to maintain stability and prevent damage. Overloading can compromise the dresser's structural integrity.

Maintenance and Care

• Cleaning: The wooden board surface is designed to be easy to clean and water-resistant. Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Spills: Promptly wipe up any spills to prevent staining or water damage.
• Inspection: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.
• Placement: Avoid placing the dresser in direct sunlight or near heat sources, as this can cause warping or fading.

Troubleshooting

If you encounter any issues not covered here or require further assistance, please contact WLIVE customer support.

Specifications

• Brand: WLIVE
• Model Name: ASNG138
• Product Dimensions: 15.75"D x 31.5"W x 39.57"H
• Color: Black
• Material: Wood (Engineered Wood)
• Finish Type: Polished
• Item Weight: 67.5 pounds
• Number of Drawers: 4
• Assembly Required: Yes
• Room Type: Bedroom, Closet, Dressing Room, Living Room, Study Room

Image: Diagram illustrating the precise dimensions of the WLIVE 4-Drawer Dresser, including depth, width, and height.

Warranty and Support

WLIVE is committed to providing quality products and customer satisfaction. This storage drawer unit comes with detailed installation instructions, and parts and accessories are coded for easy identification. If you encounter any problems or have questions regarding your dresser, please contact WLIVE customer support for assistance.

For customer support, please refer to the contact information provided with your purchase or visit the official WLIVE website.

• Returns: 30-day easy returns policy.
• Protection Plans: Optional 2-Year and 3-Year protection plans may be available for purchase.