Introduction
Thank you for choosing the Sanyipace Heated Japanese Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet toilet seat. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Instructions
To reduce the risk of burns, electrocution, fire, or injury, please observe the following safety precautions:
- Ensure the product is properly grounded.
- Do not immerse the product in water or other liquids.
- Unplug the product during lightning storms or when unused for extended periods.
- Do not operate if the cord or plug is damaged.
- Keep all electrical components dry.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Package Contents
Please check that all components are present before installation:
- Sanyipace Heated Japanese Bidet Toilet Seat
- Remote Control
- Mounting Plate and Screws
- T-adapter for water supply
- Water Supply Hose
- User Manual (this document)
Product Overview
The Sanyipace Bidet Toilet Seat integrates advanced features for enhanced hygiene and comfort. Key components include the main bidet unit, a remote control for personalized settings, and an automatic lid mechanism.
Image: The Sanyipace Heated Japanese Bidet Toilet Seat with its remote control, showcasing the sleek design and integrated features.
Installation Guide
Before installation, ensure your toilet dimensions are compatible. Refer to the measurement guide below.
Image: A diagram illustrating how to measure your toilet bowl to ensure compatibility with the bidet seat. Key measurements for length, width, and bolt hole spacing are shown.
Step-by-Step Installation:
Image: A visual guide detailing the six steps for installing the bidet toilet seat, from inserting rubber expansion plugs to connecting the water supply and power.
- Insert Rubber Expansion Plugs: Place the two rubber expansion plugs into the designated screw holes on your toilet bowl.
- Mount the Fixing Plate: Secure the small round metal washers (as shown in the image) under the fixing plate. Align the fixing plate and secure it with screws. Ensure the screws are fully tightened.
- Fill Aroma Container (Optional): Open the aroma container on the side of the toilet seat, insert an aroma tablet, and close the lid.
- Attach the Toilet Seat: Align the toilet seat parallel to the fixing plate and slide it straight back until it clicks into place and is firmly seated.
- Connect Water Supply: Install the T-adapter between the angle valve and the toilet tank hose. Connect the bidet's water supply hose to the T-adapter. Ensure all connections are secure and leak-free.
- Power On: Plug the power cord into a grounded electrical outlet and test the functions of the toilet seat.
Operating Instructions
Automatic Lid Operation
Image: Illustration of the bidet seat's automatic lid function, showing the lid opening upon approach and closing after use, activated by a microwave sensor.
The bidet seat features a microwave sensor that automatically opens the lid when you approach and closes it gently after 90 seconds of leaving the seat. This provides a touch-free and hygienic experience.
Multiple Cleaning Modes with Warm Water
Image: Diagram showing the internal heating mechanism for instant warm water and the separate, filtered water supply for posterior and feminine wash, along with the automatic nozzle self-cleaning feature.
The bidet offers various cleaning modes with adjustable warm water temperature and pressure:
- Posterior Wash: For general cleansing.
- Feminine Wash: A softer, wider spray for gentle cleansing.
- Oscillation: The nozzle moves back and forth for a wider cleaning area.
The ceramic heater provides instant warm water, maintaining a constant temperature for a comfortable experience. The nozzle also performs an automatic self-cleaning cycle after each use.
Heated Seat Function
Image: A visual representation of the heated seat function, showing manual temperature settings (34°C, 37°C, 40°C) and an intelligent seasonal temperature adaptation mode.
Enjoy a warm seat with two heating modes:
- Manual Temperature Setting: Choose from 3 levels (e.g., 34°C, 37°C, 40°C).
- Intelligent Thermostat Mode: Automatically adjusts the seat temperature based on ambient conditions for optimal comfort and energy efficiency.
Warm Air Drying
Image: Depiction of the warm air drying function, showing adjustable temperature settings (room temperature, 45°C, 50°C, 55°C) and highlighting benefits like quick drying, reduced toilet paper use, and comfortable skin.
After cleansing, use the warm air dryer for a comfortable and hygienic finish. The dryer offers adjustable temperature settings (e.g., room temperature, 45°C, 50°C, 55°C) for quick drying in approximately 30 seconds, reducing the need for toilet paper.
Dual Control: Knob and Remote Control
Image: Detailed view of the bidet's dual control system, featuring a rotary knob for basic functions and a comprehensive wireless remote control for precise adjustments of all features, including water pressure, temperature, and seat temperature.
The bidet seat can be operated using either the integrated rotary knob or the wireless remote control:
- Rotary Knob: Provides quick and intuitive access to primary functions like posterior wash and feminine wash.
- Remote Control: Offers precise adjustments for all features, including water pressure, water temperature, seat temperature, nozzle position, and dryer settings. It also controls the automatic lid and nightlight.
Maintenance
Cleaning the Bidet Seat
- Unplug the unit before cleaning.
- Wipe the exterior with a soft, damp cloth and a mild, non-abrasive cleaner.
- Do not use harsh chemicals, abrasive cleaners, or brushes that could scratch the surface.
Nozzle Cleaning
The nozzle performs an automatic self-cleaning cycle before and after each use. For additional cleaning:
- Refer to the remote control or side panel for a manual nozzle cleaning function, if available.
- Gently wipe the nozzle with a soft cloth if visible residue is present.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord unplugged, circuit breaker tripped | Ensure power cord is securely plugged in. Check circuit breaker. |
| No water spray | Water supply valve closed, hose kinked, filter clogged | Open water supply valve. Check for kinks in the hose. Clean or replace water filter if necessary. |
| Water temperature not warm | Heater setting too low, heater malfunction | Adjust water temperature setting. If problem persists, contact customer support. |
| Lid not opening/closing automatically | Sensor obstructed, sensor malfunction | Ensure the sensor area is clean and unobstructed. Check remote settings for automatic lid function. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Sanyipace |
| Model | B0F47G9GR7 |
| Dimensions (L x W x H) | 50 x 37 x 2.51 cm (approx. 19.7 x 14.6 x 1.0 inches) |
| Weight | 4.86 kg (approx. 10.7 lbs) |
| Color | White |
| Material | Polypropylene (PP) |
| Style | Modern |
| Shape | U-Shape |
| Power Source | Corded Electric (Batteries not required) |
| Special Features | Heated Seat, Warm Water Wash, Warm Air Dryer, Automatic Lid, Remote Control, Nightlight, Aromatherapy (optional) |
Warranty and Support
Sanyipace products are designed for quality and reliability. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Sanyipace website. Please have your model number (B0F47G9GR7) ready when contacting support.
For more information, you can visit the Sanyipace Brand Store.