oneisall DTJ-001
Contents
oneisall DTJ-001 Dog Clippers User Manual
Model: DTJ-001 | Brand: oneisall
Introduction
Thank you for choosing the oneisall DTJ-001 Dog Clippers. This grooming kit is designed to provide a safe, efficient, and quiet grooming experience for your pet. Equipped with durable stainless steel blades and a powerful motor, it is suitable for various coat types, including thick and tangled fur. Please read this manual thoroughly before first use to ensure proper operation, maintenance, and to maximize the lifespan of your clippers.
Package Contents
Upon opening the package, please verify that all items listed below are present and in good condition:
- oneisall Dog Clipper (DTJ-001)
- 6 Guide Combs (3mm, 6mm, 9mm, 12mm, 18mm, 24mm)
- Cleaning Brush
- Grooming Oil
- Charging Cable (USB)
- User Manual (this document)
- Storage Bag

Figure 1: Contents of the oneisall DTJ-001 Dog Grooming Kit.
Product Features
- Superior Stainless Steel Blades: Designed for durability, sharpness, and safety, preventing rust and dulling.
- Dual-Speed Powerful Motor: Adjustable speeds (5500-7000 RPM) for stable and controlled grooming, preventing snagging or pulling.
- Ultra-Low Noise Design: Operates below 55dB to ensure a calm and stress-free grooming environment for your pet.
- Long-Lasting Battery: 2000mAh Lithium-ion battery provides up to 210 minutes of runtime after a 3-hour charge.
- LCD Display: Clearly shows battery levels and usage status for precise control.
- Detachable & Washable Blades: Blades can be easily detached and rinsed under water for hygienic cleaning and extended lifespan. (Note: The clipper body is not waterproof.)
- 6 Guide Combs: Includes 3mm, 6mm, 9mm, 12mm, 18mm, and 24mm combs to achieve various coat lengths and styles.

Figure 2: The sharp metal blade of the oneisall clipper designed for thick hair.

Figure 3: The ultra-low noise design ensures a calm grooming experience.

Figure 4: LCD display and long-lasting battery of the clipper.
Setup
- Initial Charge: Before first use, fully charge the clipper. Connect the charging cable to the clipper's charging port and plug the other end into a USB power adapter (not included). The LCD display will indicate charging status. A full charge takes approximately 3 hours.
- Blade Inspection: Ensure the stainless steel blade is clean and properly seated. Apply a few drops of the included grooming oil to the blade before each use to ensure smooth operation and reduce friction.
- Attaching Guide Combs: Select the desired guide comb (3mm, 6mm, 9mm, 12mm, 18mm, or 24mm) based on the desired hair length. Align the comb with the clipper blade and snap it securely into place. Ensure it is firmly attached before turning on the clipper.

Figure 5: Guide combs for various hair lengths.
Operating Instructions
- Prepare Your Pet: Ensure your pet's coat is clean, dry, and free of tangles. Brush out any mats before grooming to prevent pulling and ensure a smooth cut.
- Power On: Press the power button to turn on the clipper. The LCD display will illuminate, showing the current battery level and speed setting.
- Adjust Speed: The clipper features two adjustable speeds. Press the speed adjustment button (usually the same as the power button or a separate one) to toggle between low and high speed, depending on your pet's coat thickness and sensitivity. The LCD will indicate the selected speed.
- Grooming Technique: Hold the clipper firmly and move it smoothly against the direction of hair growth. Use gentle, even strokes. For sensitive areas, proceed with extra caution.
- Monitor Battery: Keep an eye on the LCD display for the battery level indicator. Recharge the clipper when the battery is low to avoid interruptions during grooming.
- Power Off: Once grooming is complete, press the power button to turn off the clipper.

Figure 6: Operating the clipper for effective grooming.
Maintenance and Cleaning
Regular cleaning and maintenance will ensure optimal performance and extend the life of your oneisall dog clippers.
- Remove Hair: After each use, turn off the clipper and detach the blade. Use the included cleaning brush to remove any trapped hair from the blade and the clipper head.
- Wash Blades: The stainless steel blades are washable. Rinse them under running water to remove fine hair and debris. Ensure the blades are completely dry before reattaching or storing. Do not submerge the clipper body in water.
- Lubricate Blades: Apply 1-2 drops of the provided grooming oil to the blades before and after each use. Turn on the clipper for a few seconds to distribute the oil evenly. This reduces friction, prevents overheating, and maintains blade sharpness.
- Store Properly: Store the clipper and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and moisture.

Figure 7: Detachable and washable metal blade for easy cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper not turning on | Low battery; Power button not pressed firmly. | Charge the clipper fully; Press the power button firmly until the LCD display illuminates. |
| Blades pulling hair or cutting poorly | Blades are dull, dirty, or not lubricated; Hair is matted or tangled. | Clean and oil the blades; Ensure blades are properly attached; Brush out pet's hair thoroughly before grooming. |
| Clipper making unusual noise | Blades not properly aligned or lubricated; Internal component issue. | Ensure blades are clean and well-oiled; If problem persists, contact customer support. |
| Short battery life | Battery not fully charged; Battery degradation over time. | Ensure a full 3-hour charge; If battery life significantly decreases, consider replacement or contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model | DTJ-001 |
| Brand | oneisall |
| Blade Material | Stainless Steel |
| Motor Speed | 5500-7000 RPM (Dual-Speed) |
| Noise Level | Below 55dB |
| Battery Type | 2000mAh Lithium-ion |
| Charging Time | Approx. 3 hours |
| Runtime | Up to 210 minutes |
| Guide Comb Sizes | 3mm, 6mm, 9mm, 12mm, 18mm, 24mm |
| Item Weight | 0.56 Kilograms (approx. 1.23 Pounds) |
| Color | Grey Blue |
Warranty and Support
For warranty information, technical support, or any inquiries regarding your oneisall DTJ-001 Dog Clippers, please refer to the contact information provided on the product packaging or visit the official oneisall website. Keep your purchase receipt as proof of purchase for warranty claims.
You can also visit the oneisall store on Amazon for more products and support: oneisall Amazon Store
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.