1. Introduction
This manual provides instructions for the VINABTY NCLIUK-H265 Replacement Remote Control. This remote is designed to be compatible with Macwick DVB-T2 Decoder Digital Terrestre H265 HEVC systems, offering a direct replacement without the need for complex programming.
Please read this manual thoroughly before using the remote control to ensure proper operation and to maximize its lifespan.
2. Product Overview
The VINABTY NCLIUK-H265 is an infrared (IR) remote control designed for ease of use. It features a standard layout for controlling DVB-T2 decoder functions.
Figure 1: Front view of the VINABTY NCLIUK-H265 remote control. This image displays the full button layout, including power, volume, channel, navigation, and numeric keys, along with specific function buttons for DVB-T2 decoders.
3. Setup
3.1 Battery Installation
The remote control requires two AAA (1.5V) batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Figure 2: Back view of the remote control with the battery compartment open. This image illustrates the correct orientation for inserting two AAA batteries.
Important: Ensure correct battery polarity. Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote will not be used for an extended period.
4. Operating Instructions
This remote control operates via infrared (IR) signals. Point the remote directly at your Macwick DVB-T2 Decoder. The effective operating range is approximately 10 meters (33 feet).
4.1 Basic Functions
- Power (⏻): Turns the DVB-T2 decoder on or off.
- VOL+ / VOL-: Adjusts the volume level.
- CH+ / CH-: Changes the channel up or down.
- Numeric Keys (0-9): Directly input channel numbers.
- OK / LIST: Confirms selections or displays the channel list.
- MENU: Accesses the main menu of the decoder.
- EXIT: Exits the current menu or function.
- Navigation Arrows (▲ ▼ ◄ ►): Navigate through menus and options.
- INFO (i): Displays program information.
- EPG: Accesses the Electronic Program Guide.
- TXT: Activates Teletext (if supported).
- PAGE ▲ / ▼: Scrolls through pages in menus or EPG.
- PVR: Initiates Personal Video Recording (if supported by decoder).
- V-FORMAT: Changes video format.
- ASPECT: Adjusts screen aspect ratio.
- TIMER: Sets recording or viewing timers.
- SUB-T: Selects subtitle options.
- AUDIO: Selects audio tracks or languages.
- Mute (🔇): Mutes or unmutes the audio.
- TV/RADIO: Switches between TV and Radio modes.
- FAV: Accesses favorite channels list.
No Programming Required: This remote control is pre-programmed for direct use with compatible Macwick DVB-T2 Decoder models. Simply insert batteries and begin operation.
5. Specifications
| Feature | Detail |
|---|---|
| Brand | VINABTY |
| Model | NCLIUK-H265 |
| Compatible Devices | Macwick DVB-T2 Decoder Digital Terrestre H265 HEVC |
| Connectivity Technology | Infrared (IR) |
| Controller Type | Button Control |
| Maximum Range | 10 Meters (approx. 33 feet) |
| Power Source | 2 x AAA Batteries (not included) |
| Material | Plastic |
| Special Features | Ergonomic design |
| Product Dimensions | 10 x 5 x 0.9 cm (approx. 3.94 x 1.97 x 0.35 inches) |
| Item Weight | 50 g (approx. 0.11 lbs) |
Figure 3: Side view of the remote control illustrating its dimensions: 17.5 cm (6.89 in) in length and 4.5 cm (1.77 in) in width.
6. Troubleshooting
- Remote not responding:
- Ensure batteries are inserted correctly with the correct polarity.
- Replace old or depleted batteries with new ones.
- Check for any obstructions between the remote control and the DVB-T2 decoder's IR receiver.
- Ensure you are within the effective operating range (approx. 10 meters) and pointing the remote directly at the decoder.
- Buttons not functioning correctly:
- Clean the remote control buttons and surface with a soft, dry cloth to remove any dirt or residue.
- Verify that the remote is compatible with your specific Macwick DVB-T2 Decoder model.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Remove batteries if the remote control will not be used for an extended period (e.g., one month or more) to prevent leakage and damage.
- Avoid Drops: Protect the remote control from physical impact, as this can damage internal components.
8. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your original purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.
