Introduction
The VirtuFit Premium Football Goal is designed for ambitious players seeking a robust and weather-resistant solution for training and recreational play. This manual provides essential information for the safe assembly, operation, and maintenance of your football goal, ensuring its longevity and optimal performance.
This model (VF06121) measures 300 x 200 x 120 cm, making it suitable for various skill levels and environments, from backyard training to club use.
Safety Instructions
Please read and understand all safety instructions before assembling and using the football goal. Failure to follow these instructions may result in injury or damage to the product.
- Adult Supervision: Children should always be supervised by an adult when using or near the football goal.
- Secure Anchoring: Always use the provided ground anchors to secure the goal firmly to the ground. This prevents tipping, especially during strong winds or impacts from shots.
- Inspect Before Use: Before each use, inspect all parts for wear, damage, or loose connections. Do not use the goal if any part is damaged.
- Proper Assembly: Ensure all components are correctly assembled and tightened according to the instructions.
- Clear Surroundings: Ensure the area around the goal is clear of obstacles, other people, or pets during play.
- Weather Conditions: While weather-resistant, in extreme weather conditions (e.g., very strong winds, heavy snow), consider disassembling or securing the goal further to prevent damage or injury.
- No Climbing: Do not climb on the goal frame or net. This can cause the goal to tip over or damage the structure.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact VirtuFit customer support.
- Steel frame tubes (various lengths and shapes for uprights, crossbar, and support)
- Weather-resistant polyester net
- Net clips/fasteners
- 4 massive ground anchors
- Assembly hardware (bolts, nuts, washers, tools if included)
- Instruction manual (this document)
Setup and Assembly
Assembly typically requires two adults. Lay out all parts on a clean, flat surface before starting.
- Unpack and Identify Parts: Carefully unpack all components and compare them against the package contents list. Familiarize yourself with the different frame sections.
- Assemble the Base Frame: Connect the bottom horizontal bars and the vertical uprights using the provided hardware. Ensure all connections are secure but do not fully tighten bolts until the entire frame is assembled.
- Attach the Crossbar: Connect the top crossbar to the vertical uprights.
- Install Rear Support Bars: Attach the angled rear support bars that connect the top corners to the base frame. These provide stability and depth to the goal.
- Tighten All Connections: Once the entire frame is assembled, systematically tighten all bolts and connections. Ensure the frame is square and stable.
- Attach the Net: Unfold the polyester net. Starting from one corner, attach the net to the frame using the provided net clips or fasteners. Ensure the net is evenly stretched and securely fastened around the entire frame.
- Secure with Ground Anchors: Position the goal in your desired location. Insert the four massive ground anchors through the designated holes in the base frame and drive them firmly into the ground. This step is crucial for stability and safety.
Image: The VirtuFit Premium Football Goal fully assembled, showcasing its robust steel frame and hexagonal net pattern.
Image: A close-up view of the steel frame connection point and the clips used to secure the net, highlighting the sturdy construction.
Operating Instructions
The VirtuFit Premium Football Goal is designed for recreational and training use. Once assembled and securely anchored, it is ready for play.
- Usage: Use the goal for shooting practice, small-sided games, or general football training.
- Ball Type: Suitable for standard footballs. Avoid using excessively hard or weighted balls that could damage the net or frame.
- Relocation: If you need to move the goal, ensure it is lifted by at least two people to avoid dragging and potential damage to the frame or ground anchors. For significant distances, consider disassembling.
Image: The VirtuFit football goal positioned on a green lawn in a backyard setting, ready for use.
Maintenance
Regular maintenance will extend the life of your VirtuFit football goal.
- Cleaning: Clean the frame with a damp cloth and mild soap as needed. Avoid abrasive cleaners.
- Net Care: The polyester net is weather-resistant. If it becomes dirty, it can be rinsed with water. Periodically check the net for tears or fraying.
- Frame Inspection: Regularly check all bolts and connections to ensure they remain tight. Re-tighten if necessary. Inspect the steel frame for any signs of rust or damage to the powder coating.
- Ground Anchors: Ensure ground anchors remain firmly in place. Re-secure them if they become loose.
- Storage: For prolonged periods of non-use, especially during harsh winter conditions, it is recommended to disassemble the goal and store it in a dry, protected area to prevent wear and tear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Goal feels unstable or wobbly. | Loose connections; insufficient ground anchoring; uneven ground. | Tighten all bolts. Ensure ground anchors are fully inserted and secure. Move goal to a flatter surface if possible. |
| Net is sagging or loose. | Net clips are loose or missing; net is not properly stretched. | Re-attach or replace missing net clips. Re-stretch the net evenly across the frame. |
| Difficulty assembling frame parts. | Parts misaligned; burrs on tubes; incorrect part identification. | Ensure parts are oriented correctly. Check for any obstructions in the tube ends. Refer to the assembly diagram carefully. |
| Rust appearing on frame. | Damage to powder coating; prolonged exposure to moisture without cleaning. | Clean and dry the affected area. Apply rust-inhibiting paint if necessary. Consider storing indoors during off-season. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | VF06121 |
| Dimensions (L x W x H) | 300 x 200 x 120 cm (approx. 118 x 78.7 x 47.2 inches) |
| Weight | 22.3 kg (approx. 49.16 lbs) |
| Frame Material | Powder-coated Steel (60mm and 32mm thick tubes) |
| Net Material | Weather-resistant Polyester |
| Color | Black |
| Included Accessories | 4 Ground Anchors, Net Clips |
Warranty and Support
VirtuFit products are manufactured with high-quality materials and attention to ease of use, design, and extensive functionality. Therefore, you benefit from a 2-year warranty on this product.
For warranty claims, missing parts, or technical support, please contact your retailer or VirtuFit customer service directly. Please have your proof of purchase and model number (VF06121) ready when contacting support.
For more information, visit the official VirtuFit website or contact your local distributor.
