1. Product Overview
The FirFurd Oak Bookcase P487 is a freestanding 6-tier shelving unit designed for organizing books, documents, decorative items, and potted plants. It features 17 compartments of varying heights to accommodate diverse storage needs. Constructed from chipboard with a melamine coating, this bookcase offers both durability and ease of maintenance.
Image 1.1: Fully assembled FirFurd Oak Bookcase P487.
Image 1.2: Bookcase in a living room environment.
2. Safety Information
- Do not overload the shelves. Each upper compartment can hold up to 20kg, while the bottom three shelves can hold up to 30kg.
- Ensure adequate stability during installation.
- Always use the two included L-shaped anti-tip devices to secure the bookcase to a wall. This is crucial for preventing accidental tipping and ensuring safety, especially in households with children or pets.
- Assembly requires careful attention to instructions. It is recommended that two people assemble the unit.
3. Package Contents
The FirFurd Oak Bookcase P487 is delivered in two separate packages. Please ensure both packages have arrived before beginning assembly. The packages contain all necessary components, mounting instructions, and accessories for assembly.
Image 3.1: Bookcase delivered in two parcels.
If any parts are missing or damaged, please contact customer support immediately.
4. Setup and Assembly Instructions
Assembly of the FirFurd Oak Bookcase P487 requires following the detailed instructions provided in the package. Each part is numbered for easy identification. For optimal ease, speed, and stability, it is recommended that two or more people participate in the assembly process.
Key Assembly Steps:
- Unpack all components and verify against the parts list in the instruction manual.
- Follow the step-by-step diagrams and instructions carefully.
- Assemble the base and side panels first, ensuring all connections are secure.
- Attach the shelves according to the designated compartment heights.
- Once the main structure is assembled, carefully lift and position the top section onto the bottom section. This step often requires two people.
- Install the reinforced back panel.
- Secure the bookcase to the wall using the two L-shaped anti-tip devices provided. Drill pilot holes if necessary and ensure a firm attachment to a wall stud or appropriate anchor.
- Apply the included hole stickers to cover pre-drilled holes for a finished aesthetic.
Image 4.1: Recommended assembly by two or more people.
Image 4.2: Features: Raised Base, Anti-tip Devices, and Hole Stickers.
Image 4.3: Anti-tip device installation for enhanced stability.
5. Usage and Storage
The FirFurd Oak Bookcase P487 provides extensive storage with its 17 compartments. The design includes two different compartment heights to optimize space utilization for various items.
- Center Column Compartments: Measure 48cm (width) x 22cm (depth) x 34.5cm (height). Ideal for larger books, binders, or decorative pieces.
- Side Column Compartments: Measure 48cm (width) x 22cm (depth) x 28.5cm (height). Suitable for standard-sized books, photo frames, and smaller collectibles.
The open shelving design allows for easy access and display of your items. Ensure items are distributed evenly to maintain balance and stability.
Image 5.1: Bookcase dimensions and compartment sizes.
Image 5.2: Compartment sizes for different items.
Image 5.3: Versatile storage options.
6. Maintenance
To maintain the appearance and longevity of your FirFurd Oak Bookcase P487, follow these simple maintenance guidelines:
- Cleaning: Wipe the surface with a dry cloth. The melamine coating makes the surface easy to clean. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Spills: Immediately wipe up any spills with a dry or slightly damp cloth to prevent water damage or staining.
- Placement: Avoid placing the bookcase in direct sunlight or near heat sources to prevent warping or discoloration.
- Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Verify that the anti-tip devices are still securely fastened to the wall.
Image 6.1: Easy to clean surface.
7. Troubleshooting
If you encounter any issues with your FirFurd Oak Bookcase P487, please refer to the following common concerns:
- Instability: Ensure all screws are tightened and the anti-tip devices are correctly installed and secured to a solid wall. Uneven flooring can also cause instability; consider using furniture levelers if needed.
- Missing Parts: If any parts were missing upon delivery, please contact customer support with your purchase details.
- Assembly Difficulties: Review the assembly instructions carefully. If you are still experiencing difficulties, ensure you have the correct tools and consider seeking assistance from another person.
For problems not addressed here, please contact FirFurd customer support.
8. Specifications
| Model Number | P487 |
| Material | Chipboard with Melamine Coating (Oak finish) |
| Dimensions (D x W x H) | 23.5 x 149 x 188 cm |
| Number of Compartments | 17 |
| Shelf Load Capacity (Upper) | 20 kg per compartment |
| Shelf Load Capacity (Bottom 3) | 30 kg per compartment |
| Mounting Type | Freestanding (with included anti-tip devices for wall attachment) |
| Special Features | 17 Compartments, 188cm Tall, 2 Different Compartment Sizes, Raised Base, Anti-tip Devices, Hole Stickers |
| Assembly Required | Yes |
| Product Weight | 38 Kilograms |
9. Warranty and Support
For warranty information or technical support regarding your FirFurd Oak Bookcase P487, please refer to your purchase documentation or contact FirFurd customer service directly. Contact details can typically be found on the retailer's website or within your order confirmation.
When contacting support, please have your model number (P487) and purchase date available.