KTEBO® BHUSBLT-1 Electric Plasma Arc Lighter User Manual

Introduction

Thank you for choosing the KTEBO® Electric Plasma Arc Lighter. This device provides a flameless, windproof ignition source for various applications, including candles, grills, and camping. Please read this manual thoroughly before use to ensure safe and optimal operation.

Product Overview

The KTEBO® Electric Plasma Arc Lighter features a sleek design with visible internal components and a long reach for convenience.

Image: Two KTEBO Electric Plasma Arc Lighters, showcasing their transparent design and accompanying product packaging.

Components

• Ignition Port: Where the plasma arc is generated.
• Ignition Switch: Button to activate the plasma arc.
• Power Switch: Main safety switch to enable/disable the lighter.
• Power Lights: Indicate battery level and charging status.
• Type-C Charging Port: For recharging the internal battery.

Image: Detailed view of the KTEBO Electric Candle Lighter, highlighting the ignition port, ignition switch, power switch, power lights, and Type-C charging port. Dimensions are also shown: 7.4 inches (18.8 cm) long and 0.66 inches (1.78 cm) thick.

Key Features

• Flameless Plasma Arc: Generates a high-temperature electric arc for ignition without an open flame.
• Windproof & Weather-Resistant: Operates effectively in windy conditions.
• USB Rechargeable: Equipped with a Type-C port for convenient charging.
• Safety Lock: A physical power switch prevents accidental activation.
• Automatic Shut-off: The arc automatically deactivates after 7 seconds of continuous use to prevent overheating.
• Battery Indicator: LED lights display the remaining battery charge (100%, 75%, 50%, 25%).

Image: Close-up of the KTEBO Electric Candle Lighter highlighting the battery indicator lights and the safety power switch. Text indicates '500+ ignitions per charge'.

Setup: Initial Charging

Before first use, fully charge the lighter. A full charge typically provides over 500 ignitions.

1. Locate the Type-C charging port on the lighter.
2. Connect the provided USB Type-C cable to the lighter and a compatible USB power source (e.g., computer, wall adapter, power bank).
3. The power indicator lights will illuminate and flash during charging.
4. Once fully charged, all indicator lights will remain solid. Disconnect the lighter from the charging source.

Image: A KTEBO Electric Candle Lighter connected to a laptop via a USB-C cable for charging. The power indicator lights are visible, indicating the charging process.

Operating Instructions

Follow these steps to safely operate your KTEBO® Electric Plasma Arc Lighter:

1. Unlock the Lighter: Slide the main power switch to the "ON" position. The battery indicator lights will briefly illuminate.
2. Ignite: Press and hold the ignition switch. A plasma arc will appear at the ignition port.
3. Light Target: Position the ignition port near the item you wish to light (e.g., candle wick, grill charcoal). The plasma arc will ignite the target.
4. Release: Release the ignition switch to turn off the plasma arc. The arc will automatically shut off after 7 seconds if held continuously.
5. Lock the Lighter: After use, slide the main power switch to the "OFF" position to engage the safety lock and prevent accidental activation.

Image: A KTEBO Electric Candle Lighter being used to ignite a candle. The image also shows a traditional lighter with a cross-out symbol, emphasizing the flameless nature of the electric lighter.

Safety Information

Please observe the following safety precautions:

• Keep Out of Reach of Children: This product is not a toy. Always store it in a secure location away from children.
• Avoid Contact with Skin: Do not touch the plasma arc directly, as it can cause burns.
• Do Not Immerse in Water: The lighter is not waterproof. Exposure to water can damage the internal electronics.
• Do Not Expose to Extreme Temperatures: Avoid direct sunlight, open flames, or temperatures above 120°F (49°C).
• Do Not Puncture or Incinerate: The internal battery can explode if damaged.
• Use in Well-Ventilated Areas: While flameless, ensure proper ventilation when igniting items that produce smoke or fumes.
• Do Not Use Near Flammable Materials: Exercise caution when using near combustible liquids, gases, or other highly flammable substances.
• Unplug When Not Charging: Disconnect the charging cable once the lighter is fully charged.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe the exterior of the lighter. Do not use abrasive cleaners or solvents.
• Storage: Store the lighter in a cool, dry place, away from direct sunlight and moisture. Ensure the safety switch is in the "OFF" position during storage.
• Battery Care: To prolong battery life, avoid fully discharging the lighter frequently. Recharge when the battery indicator shows low power.

Troubleshooting

Specifications

• Model: BHUSBLT-1
• Brand: KTEBO
• Dimensions: 7.5"L x 0.7"W x 1.6"Th (19.05 cm L x 1.78 cm W x 4.06 cm Th)
• Weight: 2.39 ounces (67.75 grams)
• Material: Acrylonitrile Butadiene Styrene, Metal, Plastic
• Fuel Type: Electric Charge
• Battery: 1 x 12V (included)
• Charging Port: USB Type-C

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact KTEBO customer service directly. Contact details can typically be found on the manufacturer's website or through your point of purchase.

Please retain your proof of purchase for any warranty claims.