Ibywind Screen Protector Kit User Manual

Introduction

This manual provides detailed instructions for the installation and care of your Ibywind Screen Protector Kit, designed specifically for the Xiaomi Poco F7 Pro 5G 6.67-inch model. The kit includes tempered glass screen protectors, a metal camera lens protector, and a carbon fiber back film to provide comprehensive protection for your device.

Package Contents

Please verify that all items listed below are included in your package:

• 2 x Tempered Glass Screen Protectors
• 1 x Metal Camera Lens Protector (with "Hollow out" design)
• 1 x Back Carbon Fiber Skin Protector (transparent color)
• 1 x Easy Installation Frame
• 2 x Installation Accessory Kits (cleaning wipes, dust absorbers, guide stickers)
• 1 x Installation Instructions

Image: All components included in the Ibywind Screen Protector Kit.

Installation Guide

Important: This screen protector kit is ONLY COMPATIBLE with the Xiaomi Poco F7 Pro 5G 6.67-inch model. It is not compatible with the Xiaomi Poco F7 Ultra or any other model. Please confirm your phone model by navigating to "Settings" > "About Phone" > "Model" on your device.

Image: Visual guide confirming compatibility with Xiaomi Poco F7 Pro 5G only.

Preparation

1. Clean your phone screen thoroughly using the wet wipe from the accessory kit.
2. Use the dry wipe to remove any remaining moisture.
3. Use the dust absorber sticker to remove any dust particles from the screen. Ensure the screen is completely free of dust and smudges.

1. Tempered Glass Screen Protector Installation

1. Place the easy installation frame onto your phone. Ensure it snaps securely into place, aligning perfectly with your phone's edges.
2. Carefully peel off the protective film from the adhesive side of one tempered glass screen protector.
3. Align the screen protector with the top edge of the installation frame, then gently lower it onto the phone screen. The frame will guide the protector into the correct position.
4. Press gently on the center of the screen protector. The adhesive will spread automatically. If any bubbles remain, gently push them towards the edges using a soft cloth.
5. Once the screen protector is fully adhered, carefully remove the installation frame.

Image: Step-by-step application of the tempered glass screen protector using the alignment tool.

2. Back Carbon Fiber Film Installation

1. Ensure the back of your phone is clean and free of dust.
2. Carefully peel off the carbon fiber film from its backing.
3. Align the film with the back of your phone, paying attention to camera cutouts and edges.
4. Gently apply the film from one end to the other, smoothing out any air bubbles as you go.

Image: Process of applying the carbon fiber protective film to the back of the phone.

3. Metal Camera Lens Protector Installation

1. Clean the camera lens area on your phone thoroughly.
2. Peel off the adhesive backing from the metal camera lens protector.
3. Carefully align the protector over your phone's camera lenses, ensuring the cutouts match perfectly.
4. Press down firmly to secure the protector in place.

Image: Installation of the metal camera lens protector onto the phone's camera module.

For a visual guide, please refer to the installation video tutorial. (Note: No official seller video URLs were provided in the product data for direct embedding.)

Operating Your Device with Protectors

The Ibywind screen protector is designed to maintain the original functionality and aesthetic of your Xiaomi Poco F7 Pro 5G.

• High Transparency: The 99.9% transparency ensures your phone's original high-definition retina viewing experience is preserved.
• Touch Sensitivity: The 0.33mm ultra-thin design maintains the original response sensitivity of your touchscreen, allowing for smooth and accurate interactions.
• Fingerprint Unlocking: The screen protector supports fingerprint unlocking. If you experience issues, re-register your fingerprints after installation for optimal performance.
• Case Friendly: The screen protector is designed to leave enough space around the edges for compatibility with most phone cases, providing maximum coverage without interference.

Image: Illustrates the high-definition clarity maintained by the screen protector.

Image: Demonstrates the smooth and responsive touch experience with the protector installed.

Care and Maintenance

To ensure the longevity and clarity of your screen protector, follow these simple maintenance tips:

• Wipe the screen protector regularly with a soft, lint-free cloth to remove fingerprints and smudges.
• For stubborn marks, lightly dampen the cloth with water or a screen-cleaning solution (avoid harsh chemicals).
• Avoid using abrasive materials or excessive force when cleaning, as this may scratch the protector.

Troubleshooting

Bubbles After Installation

If small bubbles appear after installation, they often disappear naturally within 24-48 hours as the adhesive fully settles. For larger bubbles, gently lift the nearest edge of the protector and reapply, pushing the bubble out with a soft cloth or squeegee.

Fingerprint Sensor Issues

While the protector supports fingerprint unlocking, some users may experience reduced sensitivity. If this occurs, it is recommended to delete your existing fingerprints and re-register them after the screen protector has been installed. Ensure your finger is clean and dry during the re-registration process.

Product Specifications

Warranty and Support

Ibywind is committed to customer satisfaction and product quality. For non-manual product quality issues, a replacement is available within three months of purchase.

If you have any questions or require assistance, please contact our customer support. We aim to respond and resolve your inquiries within 24 hours on weekdays.