Introduction
The Tineco Pure ONE S70 is a powerful cordless vacuum cleaner designed for efficient cleaning across various surfaces. Featuring 200AW suction, a 3D Sense Pro Cleaning System, and an extended runtime, it offers advanced filtration and versatile cleaning capabilities for a cleaner home environment.
What's Included
Your Tineco Pure ONE S70 package includes the main vacuum unit and a range of accessories to enhance your cleaning experience:
- Main Vacuum Unit
- ZeroTangle Brush (for floors and carpets)
- Mini Power Brush (for upholstery and pet hair)
- Lint Sweeper
- Flexible Extension Hose
- 2-in-1 Crevice Tool (for tight spaces and dusting)
- Charging & Storage Stand
- Power Adapter

Setup
Follow these steps to assemble and prepare your vacuum for first use:
- Assemble the Main Unit: Connect the main vacuum body to the extension wand until it clicks securely.
- Attach the Brush Head: Connect the ZeroTangle Brush head to the bottom of the extension wand, ensuring it clicks into place.
- Set up the Charging Stand: Place the charging and storage stand on a flat surface near a power outlet. Connect the power adapter to the stand and plug it into the outlet.
- Charge the Battery: Place the assembled vacuum onto the charging stand. The battery indicator on the display will show charging status. Fully charge the battery before first use (approximately 3-4 hours).
- Store Accessories: Utilize the designated slots on the charging stand to store your accessories for easy access.
Operating Instructions
The Tineco Pure ONE S70 is designed for intuitive and efficient cleaning:
Powering On/Off and Mode Selection
- Power On: Press the power button on the handle to start the vacuum. It will typically start in Auto mode.
- Mode Selection: Use the mode selection button to switch between ECO, AUTO, and MAX modes. The 3D Light Display on the main unit will indicate the current mode and dirt level.
- Power Off: Press the power button again to turn off the vacuum.

3D Sense Pro Cleaning System
This system intelligently adapts to your cleaning needs:
- DustSense: Real-time dust detection automatically adjusts suction power based on the volume of debris.
- EdgeSense: When approaching edges, the suction power boosts automatically to capture debris right up to the wall.
- LightSense: A 150° wide-angle headlight illuminates larger areas, revealing dust particles as small as 0.02mm.



Special Features
- 180° Foldable Tube: Press the button on the wand to fold it, allowing easy cleaning under low furniture like beds and sofas without bending.
- ZeroTangle Brush: Designed with comb teeth to grab and intercept hair, preventing tangles on the roller brush.
- Clogless System: The upgraded brush structure and larger opening area (219% larger than Tineco PURE ONE A50) effortlessly tackle large debris without clogging.
- Multi-Surface Cleaning: The ZeroTangle brush features V-shaped bristles for carpets and black fine soft bristles for hard floors, providing effective cleaning without needing to change brushes.



Using Attachments
The Tineco Pure ONE S70 comes with various attachments for specialized cleaning tasks. Simply detach the main brush head and attach the desired tool until it clicks.
- Mini Power Brush: Ideal for cleaning pet hair and dust from upholstery, stairs, and car interiors.
- 2-in-1 Crevice Tool: Use the narrow end for tight corners, crevices, and edges. Slide the brush down for dusting delicate surfaces.
- Lint Sweeper: Effective for removing lint and dust from fabrics.
- Flexible Extension Hose: Provides extended reach for cleaning high or awkward areas.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Tineco Pure ONE S70.
Emptying the Dustbin
The vacuum features a One-Touch Dust Disposal system:
- Hold the main unit over a trash bin.
- Press the top-mounted tilt-down dustbin button to release the bottom flap and empty the contents.
- Close the flap securely after emptying.

Cleaning the Filtration System
The 6-Stage Filtration System captures 99.99% of dust and particles. Clean regularly to maintain suction power:
- Detach Dustbin: Press the dustbin release button to detach the entire dustbin from the main unit.
- Remove Filters: Twist and pull out the HEPA filter, fine sponge, coarse sponge, and mesh filter from the dustbin.
- Wash Filters: Rinse all washable filter components under running water until clean.
- Dry Filters: Allow all filter components to air dry completely for at least 24 hours before reassembling. Ensure they are thoroughly dry to prevent mold or damage.
- Reassemble: Once dry, reassemble the filters in reverse order and attach the dustbin back to the main unit.

Cleaning the Brush Roll
Regularly check the brush roll for tangled hair or debris.
- Turn off the vacuum and detach the brush head.
- Use a coin or tool to unlock the brush roll cover.
- Remove the brush roll and clear any tangled hair or debris.
- Reinsert the brush roll and lock the cover.
Troubleshooting
If you encounter any issues with your Tineco Pure ONE S70, please refer to the following common solutions:
- No Power: Ensure the battery is fully charged and properly inserted. Check the power adapter connection.
- Weak Suction: Check if the dustbin is full and empty it. Clean all filters thoroughly and ensure they are dry before reassembly. Inspect the brush roll and wand for any blockages.
- Brush Roll Not Spinning: Check for tangled hair or debris obstructing the brush roll. Ensure the brush head is correctly attached.
- Unusual Noise: Turn off the vacuum and inspect all parts for foreign objects or damage.
For more detailed troubleshooting or persistent issues, please contact Tineco customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand | Tineco |
| Model Name | PURE ONE S70 |
| Suction Power | 200AW |
| Runtime | Up to 95 minutes (in Eco Mode with 2-in-1 Crevice Brush) |
| Filtration System | 6-Stage Filtration (HEPA Filter) |
| Dustbin Capacity | 0.6 Liters |
| Special Features | 180° Foldable Tube, 3D Sense Pro Cleaning System, ZeroTangle Brush, LightSense, EdgeSense, DustSense, Clogless System |
| Power Source | Battery Powered |
| Item Weight | 14.56 pounds |
| Product Dimensions | 28.98"L x 7.56"W x 13.98"H |
Warranty & Support
For warranty information, product registration, and customer support, please visit the official Tineco website or contact their customer service department. Keep your purchase receipt for warranty claims.