1. Important Safety Instructions
Please read all instructions carefully before operating your advwin ice maker. Retain this manual for future reference.
- Ensure the ice maker is placed on a stable, level surface away from direct sunlight and heat sources.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Supervise children when the appliance is in use.
- Use only potable water in the water tank.
- Unplug the ice maker before cleaning or when not in use for extended periods.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Keep at least 4 inches (10 cm) of clearance around the appliance for proper ventilation.
2. Product Overview
The advwin Countertop Nugget Ice Maker is designed to produce soft, chewable nugget ice efficiently. Familiarize yourself with its components and features.
2.1 Components
- Control Panel: Features LED indicators and touch buttons for operation.
- Ice Basket: Removable basket for collecting and storing ice.
- Ice Scoop: Included for convenient ice retrieval.
- Water Tank: Reservoir for water supply.
- Transparent Window: Allows observation of the ice-making process.
- Air Vent: Located on the side for heat dissipation.
2.2 Key Features
- Rapid Ice Production: Produces chewable nugget ice in approximately 6 minutes.
- High Daily Output: Capable of producing up to 44 pounds of ice per day.
- Automatic Self-Cleaning: Initiates a 15-minute cleaning cycle with a single button press.
- Smart Indicators: LED lights for "ADD WATER" and "ICE FULL" status.
- Internal Light: Illuminates the ice-making chamber for visibility.
Image 2.1: Front view of the advwin Nugget Ice Maker, showing the control panel, transparent window with ice, and an ice scoop.
3. Setup
Follow these steps for the initial setup of your ice maker.
- Unpacking: Carefully remove the ice maker from its packaging. Remove all packing materials, including any tape or protective films.
- Placement: Place the ice maker on a flat, stable, and heat-resistant surface. Ensure there is at least 4 inches (10 cm) of space around the unit for proper ventilation. Avoid placing it near heat sources or in direct sunlight.
- Initial Cleaning: Before first use, it is recommended to clean the interior of the ice maker. Refer to the "Maintenance and Cleaning" section for detailed instructions.
- Power Connection: Plug the power cord into a grounded electrical outlet. Ensure the voltage matches the specifications of the appliance.
- First Use: After cleaning, fill the water tank with potable water up to the MAX fill line. Allow the unit to sit for at least 1 hour before starting ice production to allow refrigerants to settle.
4. Operating Instructions
Operating your advwin ice maker is straightforward with its intuitive control panel.
4.1 Control Panel Overview
Image 4.1: Close-up of the ice maker's control panel, highlighting the touch buttons and LED indicators.
- ICE Button: Press to start or stop the ice-making cycle.
- CLEAN Button: Press to activate the automatic self-cleaning function.
- LIGHT Button: Press to turn the internal light on or off.
- ADD WATER Indicator: Illuminates when the water tank needs refilling.
- POWER Indicator: Illuminates when the unit is powered on.
- ICE FULL Indicator: Illuminates when the ice basket is full, and the ice making will pause.
4.2 Starting Ice Production
- Ensure the water tank is filled with potable water. The "ADD WATER" indicator should be off.
- Press the ICE button. The "POWER" indicator will illuminate, and the ice-making cycle will begin.
- The first batch of nugget ice will typically be ready in approximately 6 minutes.
- The ice maker will continue to produce ice until the "ICE FULL" indicator illuminates, at which point it will automatically pause.
- When the ice level drops, the machine will automatically resume ice production.
Image 4.2: The ice maker in operation, highlighting its rapid ice production capability.
4.3 Using the Internal Light
To view the ice-making process or the ice level in low-light conditions, press the LIGHT button on the control panel. Press it again to turn the light off.
4.4 Understanding Nugget Ice
This ice maker produces soft, chewable nugget ice, also known as pebble ice or Sonic ice. This type of ice is distinct from traditional hard ice cubes due to its smaller size, softer texture, and ability to absorb drink flavors, making it ideal for various beverages.
Image 4.3: A glass filled with nugget ice, demonstrating its desirable texture for beverages.
5. Maintenance and Cleaning
Regular cleaning ensures optimal performance and longevity of your ice maker.
5.1 Automatic Self-Cleaning
- Ensure the ice basket is empty and the water tank is filled with clean water.
- Press and hold the CLEAN button for approximately 5 seconds.
- The cleaning cycle will begin and run for about 15 minutes. The unit will circulate water to clean internal components.
- Once the cycle is complete, drain the water from the unit. Refer to the manual for specific draining instructions, usually involving a drain plug at the bottom or back.
Image 5.1: Visual representation of the automatic self-cleaning function, indicating the button press duration and cycle time.
5.2 Manual Deep Cleaning
For thorough cleaning, especially after extended periods of non-use:
- Unplug the ice maker from the power outlet.
- Remove the ice basket and wash it with warm water and a mild detergent. Rinse thoroughly.
- The pull-out water tank can also be removed for manual cleaning. Wash and rinse it thoroughly.
- Wipe the interior and exterior surfaces of the ice maker with a soft cloth dampened with a mild cleaning solution.
- Ensure all parts are completely dry before reassembling and storing or reusing the unit.
6. Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| "ADD WATER" indicator is on. | Water tank is empty or water level is too low. | Refill the water tank with potable water up to the MAX fill line. |
| "ICE FULL" indicator is on. | Ice basket is full. | Remove ice from the basket. The machine will resume ice production automatically. |
| Ice maker is not producing ice. | No water, power issue, or ambient temperature too high. | Check water level, ensure unit is plugged in, and operate in a suitable temperature range (50-140°F). |
| Ice quality is poor or ice melts quickly. | Water temperature too high, poor ventilation, or unit needs cleaning. | Use colder water, ensure proper ventilation, and perform a cleaning cycle. |
| Unusual noise during operation. | Normal compressor operation, or unit not level. | Ensure the unit is on a level surface. If noise persists and is excessive, contact customer support. |
7. Specifications
Detailed technical specifications for the advwin Nugget Ice Maker.
Image 7.1: Dimensions of the advwin Nugget Ice Maker, illustrating its compact footprint.
- Model Number: YH-10-Z
- Product Dimensions: 15"D x 10"W x 16"H (38.1 cm D x 25.4 cm W x 40.6 cm H)
- Daily Ice Production Capacity: Up to 44 lbs (20 kg)
- Ice Basket Capacity: 3.3 lbs (1.5 kg)
- Water Tank Capacity: Approximately 3.7 Liters (not explicitly stated in product data, but inferred from 3.3lbs ice basket and typical ratios)
- Wattage: 160 Watts
- Power Supply: 110-120V/60Hz
- Refrigerant: R600a
- Operating Temperature Range: 50-140°F (10-60°C)
8. Warranty and Support
For warranty information, product support, or to purchase replacement parts, please contact advwin customer service. Refer to the product packaging or the official advwin website for contact details.
Please have your model number (YH-10-Z) and purchase date available when contacting support.
