1. Product Overview
The Tesvor Quantum Clean R5 is a powerful and versatile wet & dry vacuum cleaner designed for efficient home and furniture cleaning. Its lightweight stick design and advanced features make it ideal for various flooring types, offering a comprehensive cleaning solution.
Key Features:
- Automatic Self-Cleaning & Drying: Keeps the vacuum hygienic with a simple touch, eliminating the need to handle dirty rollers.
- Wet & Dry Deep Cleaning Power: Lifts spills, dust, and tough stains in a single pass for spotless floors.
- Extended Battery Life: Up to 45 minutes of continuous operation, perfect for larger homes.
- Smart LED Display & Real-Time Monitoring: Track battery life, performance, 23000 PA suction rate, and cleaning modes with ease.
- Compact Docking Station with Quick Charging: Neatly stores your vacuum while keeping it powered and ready to go.
2. Product Components
Familiarize yourself with the main components of your Tesvor Quantum Clean R5 vacuum cleaner:
- Main Unit: Contains the motor, battery, and control panel.
- Handle: Ergonomically designed for comfortable grip and control.
- Clean Water Tank (900ML): Holds fresh water and cleaning solution for wet cleaning.
- Dirty Water Tank (700ML): Collects dirty water and debris during cleaning.
- Brush Roll: Located at the base, responsible for scrubbing and picking up dirt.
- HEPA Filter: Ensures efficient air filtration.
- Docking Station: Used for charging and self-cleaning.
3. Setup Guide
Follow these steps to set up your Tesvor Quantum Clean R5 for first use:
- Unpack: Carefully remove all components from the packaging. Ensure all parts listed in the manual are present.
- Assemble the Handle: Insert the handle into the main unit until it clicks securely into place.
- Charge the Battery: Place the vacuum cleaner on its compact docking station. Connect the power adapter to the docking station and plug it into a wall outlet. The LED display will indicate charging status. A full charge takes approximately 90 minutes.
- Fill the Clean Water Tank: Remove the clean water tank (900ML capacity) from the main unit. Fill it with clean tap water, and if desired, add a small amount of Tesvor-approved cleaning solution. Reattach the tank securely.
4. Operating Instructions
The Tesvor Quantum Clean R5 is designed for intuitive operation, offering both wet and dry cleaning capabilities.
4.1 Powering On and Off
- To power on, press the One-Touch Start button located on the handle.
- To power off, press the same button again.
4.2 Cleaning Modes
The vacuum cleaner automatically adjusts suction and water flow for optimal cleaning. The Smart LED Display provides real-time information on the selected mode, battery life, and performance.
- Wet & Dry Cleaning: For spills, dust, and tough stains, the device simultaneously vacuums, washes, and mops. Simply push the vacuum forward and pull it back over the area to be cleaned.
- Dry Vacuuming: For dry debris only, the device will primarily use its suction power.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your Tesvor Quantum Clean R5.
5.1 Automatic Self-Cleaning
After each use, place the vacuum cleaner on its docking station and press the self-cleaning button. The device will automatically clean the brush roll and internal pathways, then dry the brush roll to prevent odors.
5.2 Emptying the Dirty Water Tank
After each wet cleaning session, or when the dirty water tank (700ML) is full, remove it from the unit and empty its contents. Rinse the tank thoroughly with clean water and allow it to air dry before reattaching.
5.3 Cleaning the Brush Roll and Filter
- Even with self-cleaning, it is recommended to periodically remove the brush roll for manual inspection and cleaning of any tangled hair or debris.
- The HEPA filter should be rinsed under running water every few uses and allowed to air dry completely before reinstallation. Do not use the vacuum without a dry filter.
6. Troubleshooting
If you encounter issues with your Tesvor Quantum Clean R5, refer to the following common solutions:
- No Power: Ensure the unit is fully charged. Check if the power adapter is securely connected to both the docking station and the wall outlet.
- Poor Suction/Cleaning Performance:
- Check if the dirty water tank is full and needs emptying.
- Ensure the clean water tank has sufficient water.
- Inspect the brush roll for any obstructions or tangled debris.
- Check if the HEPA filter is clean and properly installed. A clogged filter can reduce suction.
- Unusual Noises: Turn off the unit immediately and check for any foreign objects lodged in the brush roll or air pathways.
- Water Leaking: Ensure both the clean and dirty water tanks are correctly seated and sealed. Check for any cracks or damage to the tanks.
If the problem persists, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Tesvor |
| Model Name | R5VC |
| Special Feature | Spotless Cleaning, Wet & Dry, Self-Cleaning |
| Filter Type | HEPA Filter |
| Charging Time | 90 Minutes |
| Form Factor | Upright |
| Colour | Black |
| Product Dimensions | 11L x 26.5W x 27.1H Centimeters |
| Battery Description | Lithium-Ion |
| Battery Life | 45 Minutes |
| Country of Origin | India |
8. Warranty and Support
8.1 Warranty Information
The Tesvor Quantum Clean R5 comes with a 2 Year Warranty from the date of purchase. Please retain your purchase receipt as proof of warranty.
8.2 Customer Support
For any queries, technical assistance, or warranty claims, please contact our customer support team:
- Email: connect@doodlegroup.in
- Phone: 022-69620111
Our service network is active across India to provide prompt support.
