1. Product Overview
This manual provides instructions for the assembly, operation, and maintenance of your BORNOON 4-Drawer Dresser with LED Lights. This modern dresser features four spacious drawers, an open shelf, and integrated RGB LED lighting, designed for various room types including bedrooms, closets, living rooms, and entryways.
Image 1.1: Front view of the BORNOON 4-Drawer Dresser with LED Lights, showcasing its design and open shelf.
2. Safety Information
To ensure safe use and prevent accidental tipping, it is crucial to install the included anti-tip kit. Always secure the dresser to a wall according to the assembly instructions. Keep small parts away from children during assembly. Do not overload drawers.
Image 2.1: Close-up view showing the anti-tip device attached to the dresser and the design of the metal handles.
3. Package Contents
Before beginning assembly, verify that all components are present and undamaged. Refer to the parts list provided in the separate assembly guide. Typical contents include:
- Dresser panels (top, bottom, sides, back)
- Drawer components (fronts, sides, backs, bottoms)
- Hardware pack (screws, dowels, cam locks, etc.)
- Metal drawer slides
- Metal handles
- RGB LED light strip and controller
- Anti-tip kit
- Assembly instructions
4. Setup and Assembly Instructions
Assembly is required for this product. Please follow the detailed, step-by-step instructions provided in the separate assembly guide included in your package. All parts are labeled for easy identification. It is recommended to assemble the dresser on a soft, clean surface to prevent scratches.
Key Assembly Steps:
- Unpack all components and verify against the parts list.
- Assemble the main frame of the dresser.
- Install the drawer slides onto the dresser frame.
- Assemble each of the four drawers.
- Attach the metal handles to the drawer fronts.
- Install the RGB LED light strip into the designated open shelf area.
- Secure the dresser to the wall using the anti-tip kit.
For a visual guide on assembly, please refer to the video below:
Video 4.1: Detailed assembly instructions for the BORNOON 4-Drawer Dresser.
5. Operating Instructions (LED Lights)
The integrated RGB LED lights can be controlled via a remote or a mobile application. This allows for customization of brightness, colors, and lighting modes.
- Power On/Off: Use the designated button on the remote or within the app.
- Color Selection: Choose from over 60,000 colors using the color wheel in the app or preset buttons on the remote.
- Brightness Adjustment: Increase or decrease light intensity.
- Lighting Modes: Select various dynamic modes such as speed mode, music mode, or mic mode (if supported by the app).
- Timing Function: Set schedules for the lights to turn on or off automatically.
Image 5.1: Illustration of the mobile application interface for controlling the dresser's RGB LED lights, showing color, speed, music, mic, and timing functions.
For a demonstration of the LED light features, please watch the video below:
Video 5.2: Short demonstration of the LED light features and color options.
6. Maintenance
To maintain the appearance and longevity of your dresser:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Spills: Clean spills immediately to prevent staining or damage to the engineered wood.
- Drawer Slides: Periodically check drawer slides for smooth operation. If needed, a small amount of silicone lubricant can be applied.
- Hardware: Ensure all screws and fasteners remain tight. Retighten as necessary.
- LED Lights: The LED strip is designed for long-term use. If issues arise, refer to the troubleshooting section.
7. Troubleshooting
If you encounter issues with your dresser, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not slide smoothly | Misaligned slides, loose screws, debris in track | Check alignment of slides, tighten screws, clear debris, apply lubricant. |
| LED lights not working | Power connection issue, remote battery dead, app not connected | Ensure power adapter is securely plugged in. Check remote battery. Re-pair app with LED controller. |
| Dresser feels unstable | Anti-tip kit not installed, uneven floor, loose connections | Install anti-tip kit as per instructions. Place on a level surface. Tighten all assembly screws. |
8. Specifications
Detailed specifications for the BORNOON 4-Drawer Dresser:
- Brand: BORNOON
- Model: B0F3XN6NJ4
- Product Dimensions: 47.2"W x 13.78"D x 30.12"H
- Color: White
- Material: P2-grade Engineered Wood
- Finish Type: Glossy
- Number of Drawers: 4
- Assembly Required: Yes
- Special Features: RGB LED Lights, Metal Handles, Anti-Tip Kit
Image 8.1: Diagram illustrating the dimensions of the 4-drawer dresser and individual drawer capacity.
The dresser features four spacious drawers and an open shelf, providing ample storage for various items.
Image 8.2: The dresser with drawers partially open, demonstrating the available storage space.
9. Warranty and Support
BORNOON offers free replacement of any parts, regardless of the reason (e.g., assembly, use, or shipping damage). For assistance or part replacement, please contact BORNOON customer support through the retailer where the product was purchased or visit the official BORNOON store online.
For additional information or support, please visit the BORNOON Store.