DEWENWILS HRS103M

Download PDF
Contents

DEWENWILS Wireless Remote Control Outlet User Manual

Model: HRS103M

Introduction

Thank you for choosing the DEWENWILS Wireless Remote Control Outlet. This manual provides essential information for the safe and efficient operation of your new device. Designed for convenience, this system allows you to remotely control hard-to-reach electrical appliances with ease, enhancing comfort and simplifying your daily routines.

Product Features

  • Simply Plug in & Play: Works right out of the box with no programming or tools required.
  • 100ft Strong RF Signal: The robust RF signal penetrates walls, doors, and windows, offering a long-distance control range of up to 100ft (30m) in open areas.
  • Compact Design: Occupies only one wall socket, leaving other power outlets accessible. Its smaller size allows for easy installation in tight spaces and behind furniture.
  • Easy to Use: Remotely control various indoor appliances such as lighting, fans, chargers, lamps, and holiday decorations.
  • Expandable System: Freely add additional DEWENWILS remotes and sockets to expand your remote control system or customize combinations to suit your specific needs.
  • FCC Certificated: Rated up to 125V, 60Hz, 15A, 1875W Resistive, ensuring safety and quality for most indoor electrical appliances.

Package Contents

  • 3 x DEWENWILS Wireless Remote Control Outlets
  • 1 x Remote Control Transmitter (with 1 x 12V battery included)
  • 1 x User Manual
DEWENWILS Wireless Remote Control Outlet set with three outlets and one remote

Image: The complete package including three wireless outlets and one remote control.

Setup

  1. Unpack: Carefully remove all components from the packaging.
  2. Insert Battery (if necessary): The remote control transmitter comes with a 12V battery pre-installed. If replacement is needed, open the battery compartment on the back of the remote and insert a new 12V battery, ensuring correct polarity.
  3. Plug in the Outlet: Plug a DEWENWILS Wireless Remote Control Outlet into any standard 3-prong wall socket. Ensure the wall socket itself is powered on.
  4. Connect Appliance: Plug the appliance you wish to control into the DEWENWILS Wireless Remote Control Outlet. Ensure the appliance's power switch is in the 'ON' position if it has one, so it can be controlled by the remote.
  5. Ready to Use: The outlets and remote are pre-programmed for immediate use. No additional pairing steps are typically required.
Person using the remote to turn on a lamp plugged into a DEWENWILS outlet

Image: A user demonstrating the simple plug-and-play functionality by turning on a lamp with the remote.

Comparison showing the compact size of the DEWENWILS outlet not blocking other sockets

Image: A visual comparison highlighting the compact design of the outlet, which does not obstruct adjacent wall sockets.

Operating Instructions

Each remote control transmitter has dedicated ON/OFF buttons for each corresponding outlet (1, 2, 3). To operate:

  • Turn On: Press the 'ON' button corresponding to the desired outlet number (e.g., '1 ON' for outlet 1). The indicator light on the remote will illuminate briefly, and the connected appliance will power on.
  • Turn Off: Press the 'OFF' button corresponding to the desired outlet number (e.g., '1 OFF' for outlet 1). The indicator light on the remote will illuminate briefly, and the connected appliance will power off.
Diagram illustrating the 100ft RF remote range through walls

Image: A diagram demonstrating the extensive 100ft (30m) RF range, allowing control through walls and obstacles.

Diagram showing how one remote can control multiple outlets and multiple remotes can control one outlet

Image: An illustration of the system's flexibility, allowing one remote to control multiple outlets or multiple remotes to control a single outlet.

Maintenance

  • Cleaning: Wipe the outlets and remote with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: If the remote's indicator light does not illuminate or the range decreases significantly, it may be time to replace the 12V battery. Refer to the 'Setup' section for instructions.
  • Storage: Store the devices in a cool, dry place when not in use for extended periods.

Troubleshooting

ProblemPossible CauseSolution
Appliance does not turn ON/OFF.Outlet not powered, appliance switch OFF, remote battery low/dead, out of range, interference.Ensure wall outlet is active. Turn appliance switch to ON. Replace remote battery. Move closer to the outlet. Reduce other RF devices nearby.
Reduced remote range.Low remote battery, excessive interference, thick walls/obstacles.Replace remote battery. Minimize other RF devices. Try to use in a clearer line of sight if possible.
Outlet feels warm.Overload, incompatible power source (e.g., modified sine wave inverter).Ensure connected appliance wattage does not exceed 1875W. Avoid using with modified sine wave inverters; use with pure sine wave inverters or standard AC power. Discontinue use if excessively hot.

Specifications

AttributeValue
Model NumberHRS103M
Product Dimensions5.83 x 5.31 x 10.24 inches; 7.72 ounces
Current Rating15 Amps
Operating Voltage125 Volts
Wattage1875 Watts
Connector TypePlug In
Control MethodRemote (RF)
Remote Battery1 x 12V battery (included)
ColorWhite
Country of OriginChina

Warranty & Support

DEWENWILS products are designed for reliability and performance. For warranty information, technical support, or any inquiries, please refer to the contact information provided on the product packaging or visit the official DEWENWILS website. Please retain your purchase receipt for warranty claims.

© 2025 DEWENWILS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.