Philips TAR4500 FM Radio Alarm Clock

1. Introduction

Thank you for choosing the Philips TAR4500 FM Radio Alarm Clock. This device is designed to provide a reliable and convenient way to wake up, listen to FM radio, and charge your mobile devices. Please read this manual carefully to ensure proper use and to maximize the product's features.

2. Safety Information

Always follow basic safety precautions when using this product to reduce the risk of fire, electric shock, and personal injury.

• Do not expose the device to dripping or splashing water.
• Do not place any sources of danger on the device (e.g., liquid-filled objects, lit candles).
• Ensure adequate ventilation around the device.
• Use only attachments/accessories specified by the manufacturer.
• Do not attempt to repair the device yourself. Refer all servicing to qualified service personnel.

3. Package Contents

Verify that all items are present in your package:

• Philips TAR4500 FM Radio Alarm Clock
• Power Adapter
• User Manual (this document)

4. Product Overview

Familiarize yourself with the main components and controls of your alarm clock.

Figure 1: Front view of the Philips TAR4500 FM Radio Alarm Clock, showing the large orange LED display with time and alarm indicators.

Figure 2: Top panel of the Philips TAR4500, illustrating the layout of control buttons for alarm settings, radio tuning, volume, and snooze/brightness.

Controls and Indicators:

• Display: Large LED display for time, alarm status, and radio frequency.
• ALR 1 / ALR 2: Buttons to set and activate Alarm 1 and Alarm 2.
• HOUR / MIN: Buttons to adjust hour and minute settings.
• TUN- / TUN+: Buttons to tune FM radio frequency.
• VOL- / VOL+: Buttons to adjust volume.
• SCAN / ENTER: Button for scanning FM stations and confirming settings.
• PRESET / BACK: Button for accessing radio presets and navigating menus.
• DST: Button for Daylight Saving Time adjustment.
• SLEEP: Button to activate the sleep timer.
• SNOOZE / BRIGHTNESS: Large button for snooze function and display brightness adjustment.
• USB-C Charging Port: Located on the side/rear for charging external devices.

5. Setup

5.1 Power Connection

1. Connect the power adapter to the DC IN socket on the back of the alarm clock.
2. Plug the power adapter into a wall outlet.
3. The display will light up, and the clock will be ready for time setting.

5.2 Battery Backup

The alarm clock uses 2 x AAA batteries (not supplied) for backup power. In case of a power outage, the battery backup preserves your time and alarm settings.

1. Open the battery compartment cover on the bottom of the unit.
2. Insert 2 x AAA batteries, observing the correct polarity (+/-).
3. Close the battery compartment cover.

5.3 Setting the Time

1. Press and hold the HOUR button until the hour digits start flashing.
2. Press HOUR repeatedly to set the hour.
3. Press and hold the MIN button until the minute digits start flashing.
4. Press MIN repeatedly to set the minute.
5. The time will be set automatically after a few seconds of inactivity, or you can press SCAN / ENTER to confirm.

5.4 Daylight Saving Time (DST)

To adjust for Daylight Saving Time, simply press the DST button. The time will shift by one hour forward or backward, and the DST indicator will appear/disappear on the display.

6. Operating Instructions

Figure 3: The Philips TAR4500 features intuitive controls for daily and nightly use, including sleep timer, dual alarm, FM tuner, and 20 presets.

6.1 FM Radio

6.1.1 Tuning to FM Stations

1. Press the DAB/FM button (if available, otherwise assume FM is default mode or use TUN+/-).
2. Press TUN- or TUN+ repeatedly to manually tune to a desired frequency.
3. To auto-scan for the next available station, press and hold TUN- or TUN+.
4. Adjust the volume using VOL- or VOL+.

6.1.2 Storing and Recalling Presets

The device can store up to 20 FM radio stations.

1. Tune to the desired FM station.
2. Press and hold the PRESET / BACK button until the preset number flashes.
3. Use TUN- or TUN+ to select a preset number (1-20).
4. Press SCAN / ENTER to confirm.
5. To recall a preset station, press PRESET / BACK repeatedly to cycle through stored stations.

6.2 Alarm Function

The Philips TAR4500 features dual alarms (Alarm 1 and Alarm 2) that can be set independently.

6.2.1 Setting an Alarm

1. Press and hold ALR 1 or ALR 2 until the alarm time flashes.
2. Press HOUR to set the alarm hour.
3. Press MIN to set the alarm minute.
4. Press ALR 1 or ALR 2 again to select the alarm source: Buzzer or FM Radio. The corresponding icon will appear on the display.
5. The alarm will be set automatically after a few seconds of inactivity, or you can press SCAN / ENTER to confirm.

6.2.2 Activating/Deactivating an Alarm

Press ALR 1 or ALR 2 briefly to toggle the alarm on or off. The alarm icon will appear when active and disappear when inactive.

6.2.3 Snooze Function

When the alarm sounds, press the large SNOOZE / BRIGHTNESS button to temporarily silence the alarm for approximately 9 minutes. The alarm will sound again after the snooze period.

6.2.4 Stopping the Alarm

To stop the alarm completely, press the corresponding ALR 1 or ALR 2 button. The alarm will reset for the next day.

6.3 Sleep Timer

The sleep timer allows you to fall asleep to the radio, which will automatically turn off after a set duration.

1. While the radio is playing, press the SLEEP button repeatedly to cycle through available sleep timer durations (e.g., 120, 90, 60, 30, 15 minutes, OFF).
2. The radio will play for the selected duration and then automatically turn off.

6.4 Display Brightness

To adjust the brightness of the LED display, press the SNOOZE / BRIGHTNESS button (when the alarm is not sounding) repeatedly to cycle through different brightness levels.

Figure 4: The Philips TAR4500 features a large, clear LED display with easily readable digits, and adjustable brightness for comfort in any room lighting.

6.5 USB-C Charging Port

The integrated USB-C port allows you to charge your smartphone or other compatible devices overnight.

Figure 5: The Philips TAR4500 includes a convenient USB-C port for charging mobile devices, keeping your bedside table tidy.

1. Connect your device's USB-C charging cable to the USB-C port on the alarm clock.
2. Connect the other end of the cable to your mobile device.
3. Charging will begin automatically.

7. Maintenance

7.1 Cleaning

• Disconnect the device from the power outlet before cleaning.
• Use a soft, damp cloth to clean the exterior of the unit.
• Do not use abrasive cleaners or solvents.

7.2 Battery Replacement

If the battery backup function is not working, or if the clock loses time during a power outage, replace the AAA batteries in the battery compartment (refer to Section 5.2).

8. Troubleshooting

If you encounter issues with your Philips TAR4500, refer to the following table for common problems and solutions.

9. Specifications

• Brand: PHILIPS
• Model Number: TAR4500/10
• Color: Black
• Product Dimensions (L x W x H): 10.3 x 3.81 x 10.3 cm (4.06 x 1.5 x 4.06 inches)
• Weight: 338 grams (0.75 lbs)
• Voltage: 240 Volts
• Material: Plastic
• Special Features: Dual alarm, Integrated clock, Lightweight, USB-C charging port, Portable
• Display Type: Digital LED
• Power Source: AC Power, Battery (2 x AAA for backup, not included)
• Radio Tuner: FM Digital Tuner (up to 20 presets)

10. Warranty Information

This product is covered by a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Philips website. Keep your proof of purchase for warranty claims.

11. Customer Support

For further assistance, technical support, or product information, please visit the Philips support website or contact their customer service helpline. Contact details can typically be found on the official Philips website or in the product packaging.