Important Safety Information
- Read all instructions carefully before assembly and use.
- Keep all hardware and small parts out of reach of children.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not use power tools for assembly as this may overtighten or damage components.
- Assemble the bed frame on a soft, clean surface to prevent scratching.
- This bed frame is designed to support up to 900 lbs. Do not exceed this weight limit.
- Do not jump on the bed.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact DG Casa customer support.
Image: All components of the DG Casa Lottie Queen Bed Frame laid out, including headboard, side rails, footboard, and wooden slats.
Included Components:
- Headboard
- Footboard
- Side Rails (2)
- Wooden Slats
- Center Support Beam
- Support Legs (for center beam)
- Hardware Pack (bolts, washers, Allen wrench)
Assembly Instructions
Estimated Assembly Time: 30-60 minutes. Two people recommended for easier assembly.
Tools Required:
- Included Allen Wrench
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent damage. Refer to the "Package Contents" section to ensure all parts are present.
- Attach Side Rails to Headboard: Align the metal brackets on the side rails with the corresponding brackets on the headboard. Secure them using the provided bolts and washers. Do not fully tighten yet.
Image: Detail of the side rail and headboard connection point.
- Attach Side Rails to Footboard: Repeat the process from Step 2 to attach the other ends of the side rails to the footboard. Ensure all connections are aligned.
- Tighten All Connections: Once all four corners are connected, carefully tighten all bolts using the Allen wrench. Ensure the frame is stable and square.
- Install Center Support Beam: Place the center support beam along the length of the bed frame, connecting it to the headboard and footboard brackets. Attach the support legs to the center beam and adjust their height so they firmly touch the floor.
- Place Wooden Slats: Lay the wooden slats across the side rails, ensuring they are evenly spaced and secured into any pre-drilled holes or plastic caps. The slats provide direct support for your mattress, eliminating the need for a box spring.
Image: Assembled bed frame with wooden slats.
- Final Check: Verify all connections are tight and the bed frame is stable.
Usage Guidelines
The DG Casa Lottie Queen Bed Frame is designed for optimal comfort and support without the need for a box spring.
- Mattress Placement: Place your queen-size mattress directly onto the wooden slats. A mattress thickness of 10 inches is recommended for optimal aesthetic and comfort.
- Weight Capacity: The bed frame is engineered to support a maximum weight of 900 lbs (including mattress and occupants). Do not exceed this limit to ensure structural integrity and safety.
Image: Product dimensions and 900 lbs weight capacity.
- Even Weight Distribution: Avoid concentrating heavy loads on small areas of the bed frame.
Care and Maintenance
Proper care will extend the life and appearance of your DG Casa Lottie Bed Frame.
- Cleaning Fabric: For general cleaning, gently vacuum the upholstered fabric with a soft brush attachment to remove dust and debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, use a mild soap solution and a damp cloth, then blot dry. Test any cleaning solution on an inconspicuous area first. Avoid abrasive cleaners.
- Wood Components: Wipe wooden feet with a soft, damp cloth. Avoid harsh chemicals.
- Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fabric fading.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame feels wobbly or unstable. | Loose bolts or uneven support legs. | Ensure all bolts are securely tightened. Adjust the height of the center support legs to ensure firm contact with the floor. |
| Squeaking noises. | Loose connections or friction between components. | Re-tighten all bolts. Check slat placement and ensure they are properly seated. |
| Missing parts during assembly. | Packaging error. | Contact DG Casa customer support immediately with your purchase details. |
| Fabric appears discolored or stained. | Spills, dirt, or prolonged sun exposure. | Refer to the "Care and Maintenance" section for cleaning instructions. Avoid direct sunlight. |
Product Specifications
| Model Number | 70550-Q-OLV |
| Size | Queen |
| Product Dimensions (L x W x H) | 87"L x 69.7"W x 42.5"H |
| Color | Olive |
| Material | Upholstered Fabric, Wood |
| Weight Capacity | 900 lbs |
| Assembly Required | Yes |
| Box Spring Required | No |
| Item Weight | 91.9 Pounds |
| UPC | 810152341612 |
Warranty Information
DG Casa products are manufactured with quality and care. For specific warranty details regarding your Lottie Queen Bed Frame, please refer to the warranty card included with your purchase or visit the official DG Casa website. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact DG Casa customer support:
- Website: Visit the DG Casa Store on Amazon
- Email: Refer to your purchase documentation for direct contact email.
- Phone: Refer to your purchase documentation for direct contact phone number.
Please have your model number (70550-Q-OLV) and purchase date ready when contacting support.
