1. Introduction
This manual provides essential information for the safe and effective use of Dulux SuperCover Ultra. Please read these instructions carefully before beginning any application to ensure optimal results and safety. Dulux SuperCover Ultra is a high-quality paint product designed for superior coverage and durability.

Figure 1: Placeholder image indicating that a product image is not available. This image typically appears when the actual product image cannot be loaded or is missing from the database.
2. Safety Information
Always prioritize safety when working with paint products. Adhere to the following guidelines:
- Ventilation: Ensure adequate ventilation in the work area to prevent inhalation of fumes. Open windows and doors, or use exhaust fans.
- Personal Protective Equipment (PPE): Wear appropriate PPE, including safety glasses or goggles, gloves, and a respirator if ventilation is insufficient.
- Skin and Eye Contact: Avoid direct contact with skin and eyes. In case of contact, wash thoroughly with soap and water. For eye contact, flush with plenty of water and seek medical attention.
- Ingestion: Do not ingest. If swallowed, do not induce vomiting. Seek immediate medical attention.
- Flammability: Keep away from heat, sparks, and open flames. Store in a cool, well-ventilated area.
- Children and Pets: Keep out of reach of children and pets.
- Disposal: Dispose of paint and paint-related waste according to local environmental regulations. Do not pour down drains.
3. Setup and Surface Preparation
Proper surface preparation is crucial for achieving a smooth, durable finish with Dulux SuperCover Ultra.
- Clean the Surface: Ensure the surface is clean, dry, and free from dust, dirt, grease, and loose particles. Use a mild detergent and water for cleaning, then rinse thoroughly and allow to dry completely.
- Repair Imperfections: Fill any cracks, holes, or imperfections with appropriate filler and sand smooth.
- Sand (if necessary): Lightly sand glossy surfaces to create a profile for better adhesion. Remove sanding dust.
- Prime (if necessary): For new, porous, or uneven surfaces, apply a suitable primer. Allow the primer to dry according to its instructions.
- Masking: Use painter's tape to mask off areas not intended for painting, such as trim, windows, and electrical outlets.
- Stir the Paint: Before use, thoroughly stir Dulux SuperCover Ultra with a clean stir stick until it is uniformly mixed. Do not thin unless specified by product label.
4. Operating Instructions (Application)
Follow these steps for effective application of Dulux SuperCover Ultra:
- Application Tools: Use a high-quality brush, roller, or spray gun suitable for water-based paints.
- Temperature and Humidity: Apply in ambient temperatures between 10°C and 40°C (50°F and 104°F) and relative humidity below 85%. Avoid direct sunlight or extreme heat.
- First Coat: Apply the first coat evenly. For rollers, use a 'W' or 'M' pattern to distribute paint, then fill in. For brushes, apply in smooth, overlapping strokes.
- Drying Time: Allow the first coat to dry completely before applying subsequent coats. Refer to the product label for specific recoat times (typically 2-4 hours).
- Second Coat: Apply a second coat if desired or necessary for full coverage and durability. Follow the same application technique as the first coat.
- Coverage: Expected coverage is approximately 10-12 square meters per liter per coat, depending on surface porosity and application method.
5. Maintenance and Storage
Proper maintenance and storage will preserve the quality of your painted surfaces and remaining product.
- Cleaning Tools: Clean brushes, rollers, and other equipment immediately after use with water.
- Cleaning Painted Surfaces: Once fully cured (typically 7-14 days), painted surfaces can be gently cleaned with a soft cloth and mild, non-abrasive detergent. Avoid harsh chemicals or abrasive scrubbers.
- Storing Leftover Paint:
- Ensure the lid is tightly sealed to prevent air from entering.
- Store in a cool, dry place, away from direct sunlight and extreme temperatures (both freezing and excessive heat).
- Keep out of reach of children and pets.
- Shelf Life: Unopened, Dulux SuperCover Ultra typically has a shelf life of up to 2 years when stored correctly.
6. Troubleshooting Common Issues
This section addresses common issues that may arise during or after paint application.
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor Coverage / Streaks | Insufficient stirring, uneven application, highly porous surface, too thin application. | Stir paint thoroughly. Apply evenly. Consider a primer for porous surfaces. Apply a second coat. |
| Paint Peeling / Flaking | Poor surface preparation (dirt, grease, loose paint), moisture issues, incompatible primer. | Ensure surface is clean, dry, and properly prepared. Address any moisture problems. Use compatible primer. |
| Bubbles / Blistering | Applying paint too thickly, painting in direct sunlight or high heat, trapped moisture. | Apply thinner coats. Avoid painting in direct sun. Ensure surface is dry. |
| Slow Drying Time | High humidity, low temperature, poor ventilation, applying too thickly. | Ensure good ventilation. Maintain recommended temperature. Apply thinner coats. |
7. Specifications
Key technical specifications for Dulux SuperCover Ultra:
- Product Name: Dulux SuperCover Ultra
- Brand: Dulux
- Type: Interior/Exterior Emulsion Paint (Assumed, as specific type not provided. Adjust if known.)
- Finish: Matte/Sheen (Assumed, as specific finish not provided. Adjust if known.)
- Coverage: Approximately 10-12 sq. meters per liter per coat (depending on surface and application).
- Drying Time: Touch dry in 30-60 minutes; Recoat in 2-4 hours (Typical for water-based emulsions. Refer to product label for exact times.)
- Application Method: Brush, Roller, Spray
- Clean Up: Water
- ASIN: B0F3TR4JKG
- Manufacturer: Dulux
8. Warranty and Support
For specific warranty information regarding Dulux SuperCover Ultra, please refer to the product packaging or visit the official Dulux website. Dulux products are manufactured to high standards, and any claims related to product defects should be directed to the manufacturer.
Customer Support:
- For technical assistance, product inquiries, or to report an issue, please contact Dulux customer service.
- Visit the official Dulux Store on Amazon for more products and information.
- Always provide the product name (Dulux SuperCover Ultra) and batch number (found on the packaging) when contacting support.





