Introduction
This manual provides essential information for the safe and efficient operation of your MasterPRO Rocket Cyclone 500 Air Fryer. Designed for healthy cooking, this appliance features a 5-liter capacity and 1500W power, utilizing a 360° hot air circulation system for uniform results. It includes a digital touch panel with 8 preset programs and a customizable DIY mode, along with a transparent viewing window for monitoring food. The non-stick, PFAS-free coating and enhanced safety features ensure reliable performance.
Please read all instructions carefully before first use and retain this manual for future reference.
Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. These include:
- Read all instructions before operating the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electric shock, do not immerse cord, plugs, or the main unit in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- Ensure the appliance is placed on a stable, heat-resistant surface, away from walls or other appliances to allow adequate air circulation.
- The exterior surfaces may become hot during use. Only touch the handle and controls.
Product Overview
The MasterPRO Rocket Cyclone 500 Air Fryer is designed for user-friendly operation and efficient cooking. Key components and features include:
- 5-Liter Capacity: Suitable for preparing meals for small to medium-sized households.
- Digital Touch Panel: Intuitive interface for selecting cooking programs and adjusting settings.
- 8 Preset Programs + DIY Mode: Pre-configured settings for common dishes (fries, meat, chicken, fish, bake, seafood, desserts, vegetables) and a customizable mode for manual control.
- Skylight Viewing Window: A transparent top window allows you to monitor the cooking process without opening the basket, maintaining consistent temperature.
- 360° Hot Air Circulation: Advanced technology ensures even heat distribution for crispy exteriors and tender interiors.
- PFAS-Free Non-Stick Coating: The cooking basket features a durable, non-toxic coating for easy food release and cleaning.
- Advanced Safety Features: Includes overheat protection, a cool-touch exterior, an insulated handle, and an automatic shut-off system for safe operation.


Setup
- Unpack: Carefully remove the air fryer and all accessories from the packaging. Remove any protective films or stickers.
- Clean Before First Use: Before using for the first time, clean the cooking basket and pan with warm soapy water. Wipe the exterior of the appliance with a damp cloth. Ensure all parts are completely dry before assembly.
- Placement: Place the air fryer on a stable, level, and heat-resistant surface. Ensure there is at least 10 cm (4 inches) of clear space around the back and sides of the appliance to allow for proper air circulation. Do not place it directly under cabinets.
- Power Connection: Plug the power cord into a grounded electrical outlet. Ensure the voltage matches the specifications of your appliance.

Operating Instructions
Follow these steps to operate your MasterPRO Rocket Cyclone 500 Air Fryer:
- Prepare Food: Place your ingredients into the cooking basket. Do not overfill the basket to ensure even cooking.
- Insert Basket: Slide the cooking basket firmly back into the air fryer until it clicks into place.
- Power On: Press the power button on the digital touch panel to turn on the appliance.
- Select Program or Set Manually:
- Preset Programs: Tap the menu icon to cycle through the 8 preset programs (Fries, Meat, Chicken, Fish, Bake, Seafood, Desserts, Vegetables). The display will show the recommended time and temperature for each.
- DIY Mode: To set time and temperature manually, use the temperature and time adjustment buttons. The temperature range is typically 80°C to 200°C (175°F to 400°F) and time up to 60 minutes.
- Start Cooking: Press the start/pause button to begin the cooking cycle.
- Monitor Cooking: Utilize the Skylight viewing window to observe your food without interrupting the cooking process.
- Shake/Turn Food (Optional): For some recipes, especially fries or smaller items, you may need to shake or turn the food halfway through cooking. Carefully pull out the basket, shake or turn the food, and then reinsert the basket. The air fryer will resume cooking automatically.
- Completion: The air fryer will beep when the cooking cycle is complete and automatically shut off.
- Remove Food: Carefully pull out the basket using the cool-touch handle. Place the basket on a heat-resistant surface. Use tongs to remove the cooked food.
- Cool Down: Allow the appliance to cool completely before cleaning or storing.

Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the lifespan of your air fryer.
- Unplug and Cool: Always unplug the air fryer from the power outlet and allow it to cool down completely before cleaning.
- Clean Basket and Pan: The cooking basket and pan have a PFAS-free non-stick coating. Wash them with warm soapy water and a non-abrasive sponge. For stubborn food residue, soak the basket and pan in warm soapy water for about 10-15 minutes before cleaning. Rinse thoroughly and dry completely.
- Clean Interior: Wipe the interior of the air fryer with a damp cloth. Do not use abrasive cleaners or metal scouring pads, as these can damage the non-stick coating and heating elements.
- Clean Exterior: Wipe the exterior of the appliance with a soft, damp cloth. Do not immerse the main unit in water or any other liquid.
- Storage: Ensure all parts are clean and dry before storing the air fryer. Store it in a cool, dry place.
Troubleshooting
If you encounter any issues with your MasterPRO Rocket Cyclone 500 Air Fryer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in; power outlet malfunction; appliance not assembled correctly. | Ensure the power cord is securely plugged into a working outlet. Check if the basket is fully inserted. |
| Food is not cooked evenly. | Basket is overfilled; food not shaken/turned. | Do not overfill the basket. Shake or turn food halfway through cooking for even results. |
| White smoke coming from the appliance. | Grease residue from previous use; fatty ingredients. | Clean the basket and pan thoroughly after each use. For fatty foods, drain excess oil during cooking. |
| Unusual odor during first use. | Manufacturing residues burning off. | This is normal for the first few uses. Ensure good ventilation. The odor will dissipate. |
If the problem persists after checking these points, please contact MasterPRO customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | MasterPRO |
| Model Number | BGMP-9443 |
| Color | Black |
| Product Dimensions (L x W x H) | 35 x 33 x 50 cm |
| Capacity | 5 Liters |
| Power | 1500 Watts |
| Material | Stainless Steel, Metal |
| Item Weight | 8.2 Kilograms |
| Country of Origin | China |
Warranty and Support
Warranty information for the MasterPRO Rocket Cyclone 500 Air Fryer is typically provided with the product packaging or available on the manufacturer's official website. Please refer to these resources for details regarding warranty coverage and terms.
For technical support, service, or inquiries, please consult the contact information provided by MasterPRO in your product documentation or on their official website.





