WNKRUN Wireless Caregiver Pager System User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your WNKRUN Wireless Caregiver Pager System, Model CS-200VT. This system is designed to facilitate timely assistance for individuals requiring care, offering a reliable communication solution for various environments.

The system includes a watch pager and two 2-key call buttons, providing a simple and effective way to alert caregivers.

2. What's in the Box

• 1 x Watch Pager (Model CS-200VT)
• 2 x 2-Key Call Buttons (Model CS-M2)
• 1 x USB Charging Cable for Watch Pager
• 2 x Lanyards for Call Buttons
• 2 x CR2032 Batteries (pre-installed in call buttons)

3. Product Overview and Features

The WNKRUN Wireless Caregiver Pager System is designed for ease of use and reliability. Key features include:

• Watch Pager (Model CS-200VT): Features a clear display screen, rechargeable lithium battery with up to 72 hours standby, and vibration-only reminders.
• Call Buttons (Model CS-M2): IPX67 fully waterproof, portable with a lanyard, and equipped with Call and Cancel functions.
• Extended Range: Up to 130m/425ft in open areas. Signal can be amplified with an optional WNKRUN signal amplifier.
• User-Friendly Design: Simple operation for both the user and caregiver.

3.1 Watch Pager Details

The watch pager features a clear display for time and remaining battery. It comes with a soft silicone strap that is length-adjustable and includes perspiration holes for comfort. Charging is done via a dedicated USB clip.

3.2 Call Button Details

The call button (Model CS-M2) is IPX67 fully waterproof, making it suitable for use in bathrooms or near water. It has a "CALL" button and a "CANCEL" button. Each button is approximately 2.32" x 2.56" x 0.59" and weighs 28.6g. It uses two CR2032 batteries.

4. Setup and Configuration

Your WNKRUN Wireless Caregiver Pager System is pre-matched for immediate use. For detailed visual instructions on initial setup and advanced configurations, please refer to the video below. Text instructions for each function (F0-FB) are provided for reference.

4.1 Initial Charging

Before first use, ensure the watch pager is fully charged. Connect the USB charging cable to the watch pager and a power source. Charge for at least 30 minutes.

4.2 Power On/Off and Setup Menu (F0)

To power off the watch pager, long-press both the L and R buttons simultaneously. To enter the setup state, long-press both L and R buttons from the powered-off state. The setup menu allows access to various functions (F1-FB).

4.3 Adding Call Buttons (F1)

If you need to add new call buttons or re-pair existing ones:

1. Enter the setup state (F0).
2. Navigate to "1: Add Button" (F1) using the L/R buttons and confirm.
3. The display will show "ADD button number...". Use the L button to select the position (e.g., 001, 002) and the R button to adjust the number.
4. Once the desired number is set, press the call button you wish to pair. The watch pager will confirm successful pairing.

4.4 Deleting Call Buttons (F2)

To remove a paired call button:

1. Enter the setup state (F0).
2. Navigate to "2: Del Button" (F2) and confirm.
3. The display will show "DEL button number...". Use the L button to select the position and the R button to adjust the number of the button to delete.
4. To delete all buttons, set the number to "000Z" and confirm.

4.5 Adding/Deleting Remote Control (F3)

This function is for adding or deleting remote controls (0-9). Default is 1,0 (Delete All).

1. Enter the setup state (F0).
2. Navigate to "3: Remote" (F3) and confirm.
3. Follow the on-screen prompts to add or delete remote controls.

5. Operating Instructions

5.1 Making a Call

When assistance is needed, simply press the CALL button on the call transmitter. The watch pager will receive the signal.

5.2 Receiving and Clearing Calls

Upon receiving a call, the watch pager will display the calling number and vibrate. This ensures timely notification without disruptive ringtones.

To clear a calling number from the watch display, long-press the R button on the watch pager.

5.3 Waterproof Feature

The watch pager and call buttons are IPX67 waterproof. This means they are protected against immersion in water up to 1 meter for 30 minutes, allowing for worry-free use in environments like bathrooms or during handwashing.

5.4 Time Setting (F4)

To set the time on the watch pager (24-hour format):

1. Enter the setup state (F0).
2. Navigate to "4: SYS.Time" (F4) and confirm.
3. Use the L and R buttons to adjust the hour and minute. Confirm to save.
4. If a 12-hour format is desired, first set option B=1021, then proceed with F4 time setting.

5.5 Call Record Query (F5)

The watch pager can store up to 20 call records, including call time, number, and type.

1. Enter the setup state (F0).
2. Navigate to "5: Record" (F5) and confirm.
3. Use the L and R buttons to browse through the stored call records.

5.6 One Number Multiple Devices (F6)

This feature allows multiple call buttons to be assigned the same number. Default is OFF (0). To enable, set to ON (1).

1. Enter the setup state (F0).
2. Navigate to "6: Num Repeat" (F6) and confirm.
3. Select "1: Num Repeat ON" to enable or "0: Num Repeat OFF" to disable.

5.7 Queue Method (F7)

This setting determines how calls are displayed when multiple calls are received. Options are Reverse Queue (0) or Sequential Queue (1, default).

1. Enter the setup state (F0).
2. Navigate to "7: Queue Mode" (F7) and confirm.
3. Select "0: Inverse" for Reverse Queue or "1: Ordinal" for Sequential Queue.

5.8 Prompt Frequency (F8)

This sets how many times the watch pager will vibrate/prompt for a new call. Range is 1-9 times, default is 3 times.

1. Enter the setup state (F0).
2. Navigate to "8: ALR. Times" (F8) and confirm.
3. Use the L and R buttons to set the desired number of prompts (1-9).

5.9 Password Setting (F9)

You can set a password for accessing the watch pager's settings. Default is 0000 (no password required). The super password is 8421 (in case you forget your custom password).

1. Enter the setup state (F0).
2. Navigate to "9: Password" (F9) and confirm.
3. Enter your new password using the L and R buttons to adjust digits and confirm.

5.10 Manual Cancellation Sync Function (FA)

When enabled (ON=1), pressing the R button to clear a number on one watch pager will also clear the same number on other synced watch pagers. Default is OFF (0).

1. Enter the setup state (F0).
2. Navigate to "A: Sync.Cancel" (FA) and confirm.
3. Select "Sync. Cancel ON" to enable or "Sync. Cancel OFF" to disable.

5.11 Restore Factory Settings (FB)

Restoring factory settings will clear all registered numbers and reset all configurations to their default values. You will need to re-register call buttons using the F1 function.

1. Enter the setup state (F0).
2. Navigate to "B: Restore" (FB) and confirm.
3. Enter the default code "0009" to confirm restoration.

6. Maintenance

6.1 Call Button Battery Replacement

The call buttons use two CR2032 batteries. When the indicator light on the call button dims or fails to light up upon pressing, it's time to replace the batteries.

1. Use a screwdriver to open the four screws on the back cover of the call button.
2. Carefully open the back cover and replace the two CR2032 batteries.
3. Replace the battery cover and secure the screws.

Refer to Figure 3 for a visual guide on battery replacement.

7. Troubleshooting

• No Signal/Short Range:
  • Ensure the watch pager is charged and powered on.
  • Check call button batteries. Replace if dim or unresponsive.
  • Verify that the call buttons are correctly paired (F1 function).
  • Obstacles like thick walls or metal structures can reduce range. Consider repositioning devices or using a WNKRUN signal amplifier (sold separately) for extended coverage.
• Watch Pager Not Responding:
  • Check battery level and charge if necessary.
  • Ensure the watch pager is not in power-off mode (F0).
  • If issues persist, try restoring factory settings (FB) and re-pairing the call buttons.
• Difficulty with Setup:
  • Carefully re-read the instructions for each function (F0-FB).
  • Ensure correct button presses (short press vs. long press) as indicated in the video.
  • If you encounter a forgotten password, use the super password 8421 to access settings.

8. Specifications

9. Warranty and Support

WNKRUN products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official WNKRUN website. Please retain your proof of purchase for warranty claims.

10. Application Scenarios

The WNKRUN Wireless Caregiver Pager System is versatile and can be effectively used in various settings:

• Home Care: For elderly individuals, those with limited mobility, or anyone needing immediate assistance at home.
• Hospitals & Clinics: To allow patients to call nurses or staff quickly.
• Nursing Homes & Rehabilitation Centers: Enhances resident safety and caregiver response times.
• Restaurants & Cafes: For customers to call service staff.
• Churches & Schools: For discreet communication or emergency alerts.