Introduction
The 4smarts SkyTag Plus is an ultra-slim, versatile item tracker designed to help you locate your everyday essentials using the Apple Find My network. It offers robust features like a loud alert, IP65 water resistance, and a long-lasting replaceable battery, all while prioritizing user privacy.
Image: Two SkyTag Plus trackers, showcasing their compact design.
Package Contents
- Two SkyTag Plus trackers
- Two pre-installed CR2032 batteries
- Two attachment lanyards
- Quick-start guide
Setup Guide
Follow these steps to set up your SkyTag Plus with the Apple Find My app.
- Power On: Short press the power button located on the SkyTag Plus to turn on the device.
- Enable Bluetooth: Ensure Bluetooth is enabled on your iPhone, iPad, or Mac.
- Open Find My App: Launch the Apple Find My app on your iOS/iPadOS device (version 14.5 or later) or macOS device (Monterey or later).
- Add Item: In the Find My app, navigate to the "Items" tab and tap "Add Item," then select "Other Supported Item."
- Connect: The app will detect your SkyTag Plus. Follow the on-screen prompts to connect and name your new tracker.
Image: Visual guide for the four-step setup process of the SkyTag Plus with the Find My app.
Operating Instructions
Locating Your Item
To find your SkyTag Plus and the item it's attached to:
- Open the Find My app on your Apple device.
- Select the SkyTag Plus from your list of items.
- View its location on the map for worldwide tracking.
Image: The Find My app displaying the location of items on a map.
Playing a Sound
If your item is nearby, you can make the SkyTag Plus play a loud sound to help you pinpoint its exact location.
- In the Find My app, select your SkyTag Plus.
- Tap "Play Sound." The SkyTag Plus will emit a 100dB alert tone.
Image: The SkyTag Plus emitting a sound, visible on a smartphone screen.
Separation Alerts
Receive notifications if you leave your SkyTag Plus behind.
- Enable "Notify When Left Behind" in the Find My app settings for your SkyTag Plus.
- You will receive an alert on your device if the SkyTag Plus is separated from you.
Image: A notification on a smartphone indicating an item has been left behind.
Lost Mode
If your item is lost, you can mark it as lost in the Find My app. You will be notified when it is detected by another device in the Apple Find My network.
Privacy Features
The SkyTag Plus is designed with privacy in mind:
- Only you can see the location of your SkyTag Plus.
- Location data is not stored on the tag itself.
- The Find My network uses end-to-end encryption for security.
- Unauthorized Tracking Deterrence: If an unknown SkyTag Plus is traveling with you, your phone will alert you. If it remains undetected for a period, it will begin to play an audible signal.
Image: Smartphone alert for an unknown SkyTag detected nearby, enhancing privacy.
Maintenance
Battery Replacement
The SkyTag Plus uses a replaceable CR2032 battery, which lasts up to 16 months. You will receive a notification when the battery level is low.
- Locate the battery compartment on the back of the SkyTag Plus.
- Twist the back cover counter-clockwise to open the compartment. (Note: The cover may be stiff for child protection.)
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Align the back cover and twist clockwise to secure it.
Image: The SkyTag Plus with its battery compartment open, illustrating battery replacement.
Cleaning
Wipe the SkyTag Plus with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
Water and Dust Resistance
The SkyTag Plus has an IP65 rating, meaning it is dust-tight and resistant to splashes and rain. It is not designed for submersion in water.
Image: The SkyTag Plus demonstrating its IP65 water resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| SkyTag Plus not appearing in Find My app. | Device not powered on, Bluetooth off, out of range, or battery low. | Ensure SkyTag Plus is powered on. Check Bluetooth on your device. Move closer to the SkyTag Plus. Replace battery if needed. Re-pair the device if necessary. |
| Sound alert is too quiet or not playing. | Obstruction, distance, or low battery. | Ensure no objects are muffling the sound. Move closer to the SkyTag Plus. Replace battery. |
| Battery life shorter than expected. | Frequent use of sound alerts, extreme temperatures. | Battery life is an estimate based on normal use. Replace battery as needed. |
| Difficulty opening battery compartment. | Designed for child protection. | Apply firm pressure and twist counter-clockwise. A small tool (like a coin) might assist. |
Specifications
- Model Number: 541321
- Dimensions: 1.3"L x 1.3"W x 0.3"Th (33mm x 33mm x 7.6mm approx.)
- Weight: 0.705 ounces (20g approx.)
- Battery Type: CR2032 (replaceable)
- Battery Life: Up to 16 months (480 days)
- Alert Volume: 100dB
- Water/Dust Resistance: IP65
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Compatibility: iOS/iPadOS 14.5 or later, macOS Monterey or later (Not compatible with Android)
Warranty Information
4smarts products are covered by a manufacturer's warranty. Please refer to the quick-start guide included in your package or visit the official 4smarts website for detailed warranty terms and conditions.
Support
For further assistance, technical support, or frequently asked questions, please visit the 4smarts support page or contact their customer service directly. Contact information can typically be found on the 4smarts official website or in the product packaging.
Online Support: www.4smarts.com/support
