CLEAN REMOTE SCR10

SCR10 Clean Remote User Manual

For Smart TVs in Hospitality with Streaming & Casting

Product Overview

The CLEAN REMOTE SCR10 is a specialized TV remote control designed for use in hospitality environments with Smart TVs, including those with streaming and casting capabilities. It is compatible with various TV brands such as LG, Philips, RCA, and Samsung, and supports systems like Procentric, LG SBB, and LYNK Cloud. Its design prioritizes ease of cleaning and durability, making it an ideal solution for public and commercial settings.

This image displays the Clean Remote SCR10, a black remote control designed for smart TVs in hospitality settings. The remote features a clean, easy-to-wipe surface. Visible buttons include Power, Netflix, Apps/Casting, Menu, Guide, Info, Input, channel and volume controls, a directional pad with an OK/Select button, number pad, and dedicated buttons for Exit, Back, Mute, Order, and Closed Captioning (CC). The bottom of the remote prominently displays the 'CLEAN REMOTE' logo with the tagline 'The Safer Solution'.

Setup

1. Battery Installation

The SCR10 remote requires two AAA batteries (not included). Follow these steps to install them:

Locate the battery compartment cover on the back of the remote control.
Slide the cover downwards or press the latch to open it.
Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
Replace the battery compartment cover, sliding it back into place until it clicks securely.

Optional Battery Cover Security Screw: For added security in hospitality settings, an optional screw is included to secure the battery cover. If desired, insert the small screw into the designated hole on the battery cover after installation.

2. Initial Setup and Pairing

The SCR10 remote is pre-programmed to work with most common hospitality TV brands. No complex pairing is typically required for basic functions. For advanced features or specific TV models, refer to your TV's instruction manual for remote control compatibility and setup procedures.

Point the remote control directly at the TV's infrared receiver.
Press the Power button to turn the TV on or off.
If the remote does not respond, ensure batteries are correctly installed and have sufficient charge.

Operating Instructions

This section details the functions of the buttons on your SCR10 Clean Remote.

Button	Function
Power	Turns the TV on or off.
Netflix	Direct access to the Netflix application (requires TV to be connected to the internet and Netflix account).
Apps/Casting	Accesses the TV's application menu or initiates casting functionality.
Menu	Opens the TV's main menu for settings and options.
Guide	Displays the electronic program guide (EPG) for TV channels.
Info	Displays information about the current program or input.
Input	Cycles through available input sources (HDMI, AV, etc.).
Prev CH	Switches to the previously viewed channel.
Sleep	Activates the TV's sleep timer function.
Directional Pad (Up, Down, Left, Right)	Navigates through menus and options.
OK/Select	Confirms a selection or enters a menu item.
Exit	Exits the current menu or application.
Back	Returns to the previous screen or menu.
CH Up/Down	Changes the TV channel up or down.
CHLIST	Displays the channel list.
Mute	Mutes or unmutes the TV audio.
VOL Up/Down	Adjusts the TV volume up or down.
Number Buttons (0-9)	Directly enters channel numbers or numerical input.
Order	Specific function for ordering services, if supported by the TV system.
CC (Closed Captioning)	Toggles closed captions on or off.

Maintenance

Cleaning the Remote

The SCR10 Clean Remote is designed for easy cleaning to maintain hygiene in hospitality environments. Follow these guidelines:

Disconnect the remote from any power source (remove batteries) before cleaning.
Use a soft, damp cloth with a mild, non-abrasive cleaning solution or disinfectant wipe.
Wipe down all surfaces of the remote, paying attention to areas around buttons.
Avoid excessive moisture, and do not submerge the remote in any liquid.
Allow the remote to air dry completely before reinserting batteries or using.

Battery Replacement

Replace batteries when the remote's response becomes inconsistent or stops working. Refer to the "Battery Installation" section under Setup for detailed instructions.

Troubleshooting

Problem	Possible Cause	Solution
Remote not responding.	Dead or incorrectly installed batteries. Obstruction between remote and TV. Remote out of range.	Replace batteries, ensuring correct polarity. Remove any objects blocking the signal path. Move closer to the TV.
Specific buttons not working.	Button stuck or damaged. TV not compatible with specific function.	Gently press the button multiple times. Verify TV compatibility for the specific function (e.g., "Order" button).
Netflix/Apps button not launching app.	TV not connected to internet. App not installed or configured.	Ensure the Smart TV is connected to a stable internet connection. Check TV settings to confirm the app is installed and accessible.
Remote works intermittently.	Low battery power. Infrared interference.	Replace batteries. Ensure no strong light sources (e.g., direct sunlight, fluorescent lights) are interfering with the TV's IR receiver.

Specifications

Model: SCR10
Brand: CLEAN REMOTE
Connectivity Technology: Infrared
Compatible Devices: Television (LG, Philips, RCA, Samsung, Procentric, LG SBB, LYNK Cloud)
Max Number of Supported Devices: 1
Special Feature: Universal, Backlit
Color: Black
Overall Height: 8 inches
Overall Width: 2 inches
Overall Depth: 1 1/4 inches
Item Weight: 17 pounds
Product Dimensions: 14 x 11 x 10 inches
Manufacturer: Clean Remote
Country of Origin: Made in China

Note: The listed "Item Weight" and "Product Dimensions" appear to refer to shipping or packaging specifications rather than the remote control itself. The remote's actual dimensions are approximately 8 inches (height) x 2 inches (width) x 1.25 inches (depth).

Warranty and Support

Specific warranty terms and direct support contact information are not provided within this manual. For warranty details or technical assistance, please refer to the product packaging, the vendor from whom the product was purchased, or the official Clean Remote website.

www.cleanremote.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.