Btootos A90 Pro
Btootos A90 Pro Wireless Earbuds Instruction Manual
Your comprehensive guide to setting up, operating, and maintaining your Btootos A90 Pro Wireless Earbuds.
Introduction
The Btootos A90 Pro Wireless Earbuds are designed to provide a superior audio experience with advanced features and comfortable wear. This manual will guide you through the essential steps to maximize your earbuds' potential.
Key Features:
- 2025 Bluetooth 5.4 Technology: Ensures faster, more stable signal transmission with low latency and a range of up to 15m. Automatic pairing and multi-device compatibility.
- Outstanding ENC Noise Reduction: Dual 14.2mm low-distortion composite dynamic drivers with AAC&SBC audio coding technology and ENC calling noise cancellation for clear sound.
- LED Power Display: Convenient display on the charging case shows charge levels for both the case and earbuds.
- Extended Battery Life: Up to 6-8 hours of usage on a single charge, with the charging case providing up to 30 additional hours (total 36 hours). Features Type-C fast charging.
- Ergonomic IP7 Waterproof Design: Ultra-light Nano coating for IP7 waterproof grade, dust and rain proof. Comfortable in-ear design with soft silicone ear caps.
What's in the Box
Ensure all items are present upon unboxing:
- A90 Pro Wireless Earbuds (L/R)
- Portable Charging Box
- USB-C Charging Cable
- Silicone Earplugs (S / M / L)
- User Manual

Setup Guide
1. Charging the Earbuds and Case
Before first use, fully charge your earbuds and charging case.
- Connect the provided USB-C charging cable to the charging port on the case.
- Connect the other end of the cable to a compatible USB power source.
- The LED display on the charging case will show the current battery level. Allow approximately 1.5 hours for a full charge of the case.
- Place the earbuds into the charging case. The earbuds will charge automatically.

2. Pairing with Your Device
The A90 Pro earbuds feature one-step automatic pairing.
- Open the charging case. The earbuds will automatically power on and enter pairing mode (indicated by flashing lights on the earbuds).
- On your device (smartphone, tablet, laptop), enable Bluetooth.
- Search for "A90 Pro" in the list of available Bluetooth devices and select it to connect.
- Once connected, you will hear a voice prompt, and the earbuds' indicator lights will turn off.

Operating Instructions
The A90 Pro earbuds utilize touch controls for easy management of calls and music.
Touch Controls:
| Function | Action |
|---|---|
| Play/Pause | Tap once on either earbud |
| Next Track | Quickly tap right earbud three times |
| Previous Track | Quickly tap left earbud three times |
| Answer Call | Tap once on either earbud |
| End Call | Tap once on either earbud |
| Reject Call | Press and hold either earbud for 2 seconds |
| Activate Voice Assistant | Tap twice on either earbud |
| Volume Up | Single tap on right earbud |
| Volume Down | Single tap on left earbud |

Maintenance
Cleaning:
Regular cleaning ensures optimal performance and hygiene.
- Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove ear tips and clean any earwax or debris from the earbud nozzles using a small brush or cotton swab.
- Ensure charging contacts on both earbuds and case are clean and dry.
Water Resistance (IP7):
The earbuds are IP7 waterproof, meaning they are protected against immersion in water up to 1 meter for up to 30 minutes. They are resistant to sweat and rain, making them suitable for sports and outdoor activities.
- Do not intentionally submerge the earbuds in water for extended periods.
- After exposure to sweat or water, ensure the earbuds are completely dry before placing them back in the charging case to prevent damage.

Troubleshooting
Common Issues and Solutions:
- Earbuds not pairing: Ensure earbuds are charged. Turn off and on Bluetooth on your device. Try resetting the earbuds (refer to the user manual for specific reset instructions).
- No sound from one earbud: Place both earbuds back in the charging case, close the lid, wait a few seconds, then open and try again. Ensure both earbuds are connected to your device.
- Low volume or poor sound quality: Clean the earbud nozzles and ear tips. Adjust volume on both your device and the earbuds. Ensure a stable Bluetooth connection.
- Charging issues: Clean the charging contacts on both the earbuds and the case. Ensure the USB-C cable and power source are working correctly.
Specifications
| Feature | Detail |
|---|---|
| Model Name | A90 Pro |
| Brand | Btootos |
| Connectivity Technology | Wireless (Bluetooth 5.4) |
| Bluetooth Range | Up to 15 meters |
| Audio Driver Size | 14.2 Millimeters |
| Noise Control | Passive Noise Cancellation, Sound Isolation (ENC Call Noise Reduction) |
| Playtime (Earbuds) | 6-8 hours |
| Playtime (with Charging Case) | Up to 36 hours |
| Charging Time (Case) | 1.5 hours |
| Charging Port | USB-C |
| Water Resistance Level | IP7 Waterproof |
| Control Type | Touch Control |
| Ear Placement | In Ear |
| Item Weight | 3.52 ounces |
Warranty & Support
For warranty information and technical support, please refer to the official Btootos website or contact their customer service directly. Keep your purchase receipt for warranty claims.
Online Support: Visit the Btootos Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.




