1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of the Provision ISR SH-4050A5-5L(MM) 4-in-1 Dynamic Hybrid Digital Video Recorder (DVR) and Network Video Recorder (NVR) system. This device supports both analog and IP camera inputs, offering flexible surveillance solutions. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage.
2. Safety Information
- Ensure the power supply matches the specified voltage requirements.
- Do not expose the device to rain, moisture, or extreme temperatures.
- Avoid placing the device in direct sunlight or near heat sources.
- Do not open the device casing. Refer all servicing to qualified personnel.
- Protect power cables from being walked on or pinched.
- Use only accessories specified by the manufacturer.
3. Package Contents
Verify that all items are present in the package:
- Provision ISR SH-4050A5-5L(MM) DVR/NVR Unit
- Power Adapter
- USB Mouse
- SATA Cable (for internal HDD connection)
- Screws for HDD Installation
- Quick Start Guide
4. Product Overview
4.1 Front Panel

This image displays the front panel of the Provision ISR SH-4050A5-5L(MM) unit, featuring the brand logo and an indicator light, typically for power or status. The indicator light provides visual feedback on the device's operational status.
4.2 Rear Panel

This image illustrates the rear panel of the DVR/NVR, detailing all available ports for connectivity:
- Video In (BNC): 4 channels for analog cameras.
- Audio In/Out (RCA): 1 channel for audio input and 1 channel for audio output.
- CVBS Out (BNC): Composite Video Blanking and Sync output.
- HDMI Out: High-Definition Multimedia Interface for monitor connection.
- VGA Out: Video Graphics Array for monitor connection.
- LAN (RJ-45): Ethernet port for network connection.
- USB Ports: For mouse, USB storage, or other peripherals.
- RS-485: For PTZ (Pan-Tilt-Zoom) camera control.
- DC12V: Power input port.
5. Setup
5.1 Physical Connections
- Install Hard Drive (if not pre-installed): Open the DVR/NVR casing, connect the SATA data and power cables to the hard drive, and secure it with screws.
- Connect Cameras: Connect your analog cameras to the BNC Video In ports. For IP cameras, ensure they are connected to the same network as the DVR/NVR.
- Connect Monitor: Connect a monitor to the HDMI, VGA, or CVBS output port.
- Connect Mouse: Plug the USB mouse into one of the USB ports.
- Connect Network: Connect an Ethernet cable from your router/switch to the LAN port on the DVR/NVR.
- Connect Power: Connect the power adapter to the DC12V input and then to a power outlet. The device will power on automatically.
5.2 Initial System Configuration
Upon first boot, the system will guide you through an initial setup wizard. This typically includes:
- Setting up an administrator password.
- Configuring date and time.
- Network settings (DHCP or static IP).
- Hard drive initialization (formatting).
- Adding IP cameras (if applicable).
Follow the on-screen prompts to complete the setup. Ensure the hard drive is formatted for recording functionality.
6. Operating
6.1 Live View
After initial setup, the system will display the live view of connected cameras. You can switch between single-channel and multi-channel views using the on-screen controls or mouse right-click menu.
6.2 Recording
- Manual Recording: Click the record icon on the live view interface to start/stop recording manually.
- Scheduled Recording: Access the 'Record Schedule' settings in the main menu to set up continuous, motion-detection, or alarm-triggered recording for each channel.
- Motion Detection: Configure motion detection zones and sensitivity for specific channels to trigger recording only when activity is detected.
6.3 Playback
To review recorded footage:
- Go to the 'Playback' section from the main menu.
- Select the desired date and channels.
- Use the timeline to navigate through recordings. You can fast-forward, rewind, and pause playback.
6.4 Network Access
The DVR/NVR can be accessed remotely via a web browser or a dedicated mobile application.
- Web Browser: Enter the device's IP address into a web browser on a computer connected to the same network. Log in with your credentials.
- Mobile App: Download the official Provision ISR mobile application. Use the device's P2P ID or IP address to add the device for remote viewing.
7. Maintenance
7.1 Firmware Updates
Periodically check the Provision ISR official website for firmware updates. Firmware updates can improve system stability, add new features, and address security vulnerabilities. Follow the provided instructions carefully when performing an update.
7.2 Hard Drive Management
- Formatting: If a hard drive issue occurs or you install a new drive, format it through the system settings.
- Overwrite Mode: Configure the system to automatically overwrite the oldest recordings when the hard drive is full to ensure continuous recording.
8. Troubleshooting
- No Video Output: Check monitor connections (HDMI/VGA/CVBS), ensure the monitor is on the correct input source, and verify camera power and connections.
- No Recording: Ensure the hard drive is installed, formatted, and not full. Check recording schedules and motion detection settings.
- Network Connection Issues: Verify the Ethernet cable connection, check router/switch status, and confirm network settings (IP address, gateway, DNS) in the DVR/NVR.
- Forgot Password: Refer to the manufacturer's support documentation or contact technical support for password reset procedures.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | SH-4050A5-5L(MM) |
| Video Input | 4CH Standard BNC + 2CH IP |
| Video Output | HDMI (FHD), VGA, CVBS |
| HD Analog Recording (5MP Lite) | Up to 10FPS Per Channel |
| HD Analog Recording (4MP Lite / 2MP) | Up to 12/15FPS Per Channel |
| HD Analog Recording (2MP Lite / 1MP) | Up to 25/30FPS Per Channel |
| HD Analog Recording (960H) | Up to 25/30FPS Per Channel |
| IP Recording | 5MP and lower: 25/30FPS Per Channel |
| Local Playback | 4 Channels Simultaneously |
| Remote Playback | 4 Channels Simultaneously |
| Audio Input | 1CH + IPC Inputs |
| Audio Output | 1CH + IPC Outputs |
| Storage | 1 x SATA (Up to 6TB) |
| Network Interface | 1 x RJ-45 (10/100Mbps) |
| PTZ Support | RS-485 / CoC / IP-Over Network |
| Connectivity Technology | Ethernet |
| Compatible Devices | Camera |
| Product Dimensions | 4.5"L x 13.5"W x 20"H |
10. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official Provision ISR website. For technical support, troubleshooting assistance beyond this manual, or to inquire about service, please contact your authorized dealer or Provision ISR customer support directly. Keep your purchase receipt and product serial number handy when contacting support.