1. Product Overview
This manual provides instructions for the WENMENGDE 10-inch IPS Full Touch Automatic Rotation Screen Android Car Radio. This device is designed for single DIN car center consoles and offers a range of features including Apple CarPlay, Android Auto, GPS navigation, Bluetooth connectivity, and a rotating display. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the product's functionality.
2. What's in the Box
Verify that all components are present in the package before proceeding with installation.
- 1x Head Unit
- 1x Power Adapter
- 1x RCA Cables
- 1x GPS Antenna
- 1x Reverse Cable
- 2x USB Cables (4Pin and 6Pin)
- 1x Backup Camera
- 1x Microphone
- 1x User Manual
Figure 2.1: Package Contents
3. Specifications
| Feature | Detail |
|---|---|
| Display Size | 10 inch IPS Full Touch Screen |
| Resolution | 1024*600 |
| Processor | Quad Core Cortex-A7 1.1GHz (AC8227L SOC) |
| Memory | 2GB RAM, 32GB Storage |
| Operating System | Android |
| Connectivity | Bluetooth 4.0 (A2DP), WiFi (2.4GHz), GPS |
| Special Features | Automatic 90° Rotation, Wireless CarPlay, Android Auto, MirrorLink, Split Screen, PIP |
| Audio Output Mode | APE/FLAC/WAV/MP3/WMA |
| Surround Sound | 2.0 Channel Configuration |
| Video Encoding | Common formats (e.g., H.264, MPEG-4) |
| Dimensions (Head Unit) | 10 inch screen (256mm width, 160mm height), Main body: 116mm depth, 179mm width, 50mm height |
| Item Weight | 5.5 pounds |
Figure 3.1: Product Dimensions
Figure 3.2: Internal Processor Architecture
Figure 3.3: IPS Screen Visual Quality
4. Installation
This car radio is designed for most general-purpose 1 DIN car center consoles. Professional installation is recommended. Ensure the vehicle's power is disconnected before beginning installation.
4.1 Wiring Diagram
Refer to the following diagram for proper connection of the head unit ports.
Figure 4.1: Head Unit Port Functions and Wiring
4.2 Before and After Installation Example
The image below illustrates a typical installation scenario, replacing a standard 1 DIN radio with the WENMENGDE 10-inch unit.
Figure 4.2: Installation Comparison (Before vs. After)
5. Setup
5.1 Initial Power On
After successful installation, turn on your vehicle's ignition. The head unit should power on automatically. Follow any on-screen prompts for initial setup.
5.2 WiFi Connection
To access online features, connect the device to a WiFi network.
- Go to Settings on the head unit.
- Select Network & Internet.
- Turn on Wi-Fi and select your desired network.
- Enter the password if prompted.
The unit supports 2.4GHz WiFi frequency and can connect to a mobile hotspot. Once connected, you can download applications from the Google Play Store.
Figure 5.1: WiFi Network and App Download
5.3 GPS Setup
The car radio includes a built-in GPS module and comes with offline maps pre-installed in the "Maps" application.
- Ensure the GPS antenna is properly connected during installation.
- Open the "Maps" application to access navigation.
- With a WiFi connection, online maps and real-time traffic updates are available.
Figure 5.2: GPS Navigation Interface
6. Operating Instructions
6.1 Automatic Screen Rotation
The device features a 90° automatic rotation function, allowing the UI to switch between horizontal and vertical orientations. This adjustment occurs automatically based on the screen's physical orientation.
6.2 Apple CarPlay & Android Auto
The head unit supports both Apple CarPlay and Android Auto for seamless smartphone integration.
- Wireless Connection:
- Connect your cell phone's Bluetooth to the head unit.
- Open the pre-installed application named "Zlink".
- Wait for the automatic connection to establish CarPlay or Android Auto.
- Wired Connection:
- Connect your cell phone to the head unit using a USB cable.
- The system should automatically detect and launch CarPlay or Android Auto.
6.3 Bluetooth Functionality
The built-in Bluetooth 4.0 with A2DP supports hands-free calling, phone book synchronization, and music streaming.
- To pair, go to the Bluetooth settings on the head unit and your phone.
- Select the head unit from your phone's available devices and confirm pairing.
- Once paired, you can make/receive calls and play audio wirelessly.
Figure 6.1: Bluetooth Call Interface
6.4 Split Screen Mode
The split-screen feature allows you to run two applications simultaneously, such as navigation and music playback.
- To activate, open one application, then drag from the side or use the split-screen button (if available) to select a second application.
Figure 6.2: Split Screen Operation
6.5 Steering Wheel Control (SWC)
The unit supports analog steering wheel controls. Manual learning is required to map your vehicle's steering wheel buttons to the head unit functions.
- Access the Steering Wheel Control settings in the system menu.
- Follow the on-screen instructions to assign functions (e.g., volume up/down, track skip, answer call) to your steering wheel buttons.
- Note that there are two Key/SW wires for analog steering wheel control.
Figure 6.3: Steering Wheel Control Learning Interface
6.6 Rear View Camera & DVR Function
The car radio is equipped with a waterproof night vision reversing camera.
- Rear View: When the vehicle is shifted into reverse gear, the car stereo will automatically display the rear view image from the connected camera.
- DVR Function: The unit supports video input, allowing you to connect a USB dash cam for recording.
Figure 6.4: Reverse Rear View Display
6.7 Radio Operation
The unit features an MT6625LN Radio Module for stable signal reception and clear sound.
- Access the Radio application from the main menu.
- Use the on-screen controls to scan for stations, save presets, and adjust frequency.
Figure 6.5: Radio Interface
7. Maintenance
7.1 Software Updates (FOTA)
The device supports Firmware Over-The-Air (FOTA) updates for the system and CAN versions.
- Regularly check for updates in the Settings menu under System Updates.
- Ensure a stable internet connection during updates to prevent interruptions.
Figure 7.1: FOTA Update Interface
7.2 Cleaning
Use a soft, dry cloth to clean the screen and exterior of the unit. Avoid abrasive cleaners or solvents.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | Incorrect wiring; Blown fuse; Vehicle power issue. | Check all power connections (B+, ACC, GND). Verify the fuse in the power adapter. Consult a professional for vehicle electrical inspection. |
| CarPlay/Android Auto not connecting wirelessly | Bluetooth not paired; "Zlink" app not open; Phone software incompatibility. | Ensure Bluetooth is connected. Open the "Zlink" app. Check if your phone's operating system is up-to-date and compatible. Try a wired connection. |
| Slow performance or app loading | Too many apps running; Low storage; Software issue. | Close unnecessary applications. Clear cache for frequently used apps. Perform a system restart. Check for system updates. |
| Steering Wheel Controls not working | Not programmed; Incorrect wiring of KEY/SW wires. | Perform manual learning for SWC in settings. Verify KEY1 and KEY2 wire connections. |
| No GPS signal | GPS antenna not connected or improperly placed. | Ensure the GPS antenna is securely connected and placed in an area with a clear view of the sky. |
9. Warranty and Support
For any questions or technical assistance regarding your WENMENGDE car radio, please contact our professional support team.
- Our team aims to reply within 24 hours.
- Refer to your purchase documentation for specific warranty terms and contact information.