CHOEZON 43" Vinyl Record Storage Holder

Introduction

Thank you for choosing the CHOEZON 43" Vinyl Record Storage Holder. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use and longevity of your product. Please read this manual thoroughly before assembly and retain it for future reference.

Image: The CHOEZON 43" Vinyl Record Storage Holder, showcasing its design and storage capabilities for a record player, speakers, and vinyl albums.

Safety Information

Please observe the following safety precautions:

• Keep all small parts and packaging materials away from children and pets to prevent choking hazards.
• Ensure all connections are secure before placing items on the unit.
• Do not exceed the maximum weight capacity of 50 pounds per shelf.
• Use the included anti-tip kit to secure the unit to a wall, especially in households with children or pets, to prevent accidental tipping.
• Avoid placing the unit in direct sunlight or near heat sources to prevent material damage.

Package Contents

Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Engineered Wood Panels (various sizes)
• Metal Frame Components
• Metal Wire Dividers (5 pieces)
• Adjustable Feet (5 pieces)
• Assembly Hardware (screws, bolts, Allen wrench)
• Anti-Tip Kit
• Instruction Manual

Setup and Assembly

Assembly typically takes approximately 30-60 minutes. Two people are recommended for easier assembly.

Tools Required:

• Phillips Head Screwdriver (not included)
• Allen Wrench (included)

Assembly Steps:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in the manual to identify each piece.
2. Assemble the Metal Frames: Connect the vertical and horizontal metal frame components using the provided screws and Allen wrench. Do not fully tighten screws until all parts are aligned.
3. Attach Wood Panels: Secure the engineered wood panels to the metal frame using the designated screws. Ensure the rustic brown finish faces outwards.
4. Install Adjustable Feet: Screw the 5 adjustable feet into the bottom of the metal frame. Adjust them later to level the unit on uneven surfaces.
5. Insert Metal Mesh and Dividers: Place the metal mesh panels into their designated slots on the upper shelf. Insert the 5 removable metal wire dividers into the lower shelf as desired for organizing records.
6. Secure with Anti-Tip Kit: Attach the anti-tip kit to the top rear of the unit and to a wall stud using appropriate hardware. This step is crucial for stability.

Image: Detailed views of the product's components, including the engineered wood, metal wire dividers, adjustable feet, and iron mesh.

Operating Instructions

This storage holder is designed to organize your vinyl records and audio equipment efficiently.

Upper Display Area:

The top surface and the three compartments are ideal for placing a record player, speakers, or other audio equipment. The metal mesh surround helps display album covers prominently.

Image: The record player table configured with a record player, speakers, and receiver, demonstrating its use as an audio station.

Lower Storage Area:

The lower shelf features five removable metal wire partitions. These dividers allow for flexible organization of your vinyl record collection. You can adjust their positions or remove them entirely to accommodate different storage needs, such as larger albums or other media.

Image: A visual breakdown of the upper display and lower storage areas, highlighting their respective capacities and features.

Capacity:

The unit can hold up to 400 vinyl records, depending on their thickness and packaging. Each shelf has a weight capacity of 50 pounds.

Video Demonstration:

Video: An official product video from CHOEZON DIRECT demonstrating the features and usage of the 43" Vinyl Record Storage Holder.

Maintenance

To maintain the appearance and functionality of your storage holder, follow these guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Dusting: Regularly dust the unit with a dry, soft cloth to prevent dust buildup.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Placement: Avoid exposing the unit to extreme temperature changes or high humidity, which can affect the engineered wood.

Troubleshooting

Specifications

Image: A technical drawing with precise measurements of the storage holder, indicating length, width, and height of various sections.

Warranty and Support

CHOEZON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your purchase or contact CHOEZON customer support directly.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact our customer support team:

• Email: support@choezon.com (example)
• Phone: 1-800-XXX-XXXX (example)
• Website: CHOEZON Official Store