Hiluckey HI-S025

Hiluckey Solar Charger 25000mAh Instruction Manual

Brand: Hiluckey | Model: HI-S025

Introduction

This manual provides detailed instructions for the safe and efficient use of your Hiluckey Solar Charger 25000mAh. This portable power bank is designed for outdoor and emergency use, featuring four high-efficiency solar panels and multiple charging outputs. Please read this manual thoroughly before operating the device.

Product Features

  • 2025 Upgraded Solar Panels: Equipped with four state-of-the-art solar panels, offering up to 10 times more efficiency than standard single-panel chargers.
  • Super-Fast Charging: Features upgraded QC 3.0 technology, delivering 5V/3A fast charging to reach 65% battery in just 30 minutes. Includes one USB-C port and two USB-A ports for simultaneous charging of three devices.
  • High Capacity: Built with a 25000mAh lithium polymer battery, capable of charging a smartphone 6-8 times and a tablet 2.5 times.
  • 2.5X Fast Recharging: The USB-C port supports both input and output. When charged with a PD fast charger (not included), the power bank fully recharges in approximately 6 hours.
  • Outdoor Essential: Integrated bright flashlight with a beam range of up to 135 feet and up to 110 hours of continuous use. The rugged, shock-resistant design is built for harsh outdoor conditions.

What's in the Box

  • 1 x Hiluckey Solar Charger 25000mAh (Model HI-S025)
  • 1 x USB-C cable
  • 1 x USB-A to USB-C cable
  • 1 x User Manual

Setup

  1. Initial Charge: Before first use, fully charge the power bank via a wall adapter using the provided USB-C cable. Connect the USB-C cable to the power bank's USB-C port and the other end to a compatible USB wall adapter (not included). The LED indicators will show charging progress.
  2. Unfold Solar Panels: For solar charging, unfold the four solar panels completely to expose them to direct sunlight.
Hiluckey Solar Charger unfolded with four solar panels

Image: The Hiluckey Solar Charger unfolded, displaying its four solar panels ready for charging.

Operating Instructions

Charging the Power Bank

  1. Via Wall Outlet (Fastest Method):
    • Connect the provided USB-C cable to the power bank's USB-C input/output port.
    • Plug the other end into a compatible PD fast charger (not included).
    • The power bank will fully charge in approximately 6 hours. The LED indicators will illuminate to show the charge level.
  2. Via Solar Panels:
    • Unfold all four solar panels and place the charger in direct sunlight.
    • Ensure the panels are facing the sun for maximum efficiency.
    • The solar charging indicator light (usually green) will illuminate when solar power is being absorbed.
    • Solar charging is slower than wall charging and is primarily intended for emergency use or maintaining charge, not as a primary charging method.
Hiluckey Solar Charger with four panels in sunlight

Image: The solar charger laid out with its four panels exposed to sunlight, indicating solar charging in progress.

Charging External Devices

  1. Connect your device's charging cable to one of the power bank's output ports (2x USB-A, 1x USB-C).
  2. The power bank will automatically begin charging your device.
  3. You can charge up to three devices simultaneously.
Hiluckey Solar Charger charging multiple devices

Image: The power bank connected to and charging multiple electronic devices simultaneously.

Using the Flashlight

  • Press and hold the power button for 3 seconds to turn the flashlight ON or OFF.
  • Short press the power button to cycle through different modes (e.g., steady light, SOS, strobe).
Hiluckey Solar Charger flashlight in use

Image: The built-in LED flashlight of the solar charger illuminating a dark area, demonstrating its utility.

Maintenance

  • Keep the device dry and away from extreme temperatures.
  • Clean the solar panels regularly with a soft, damp cloth to ensure optimal charging efficiency.
  • Avoid dropping or subjecting the device to severe impacts to prevent damage to the solar cells.
  • Store the power bank in a cool, dry place when not in use.
Rugged construction of Hiluckey Solar Charger

Image: Close-up of the solar charger's rugged exterior, highlighting its durable and shock-resistant construction.

Troubleshooting

ProblemPossible CauseSolution
Device not charging from solar panels.Insufficient sunlight, panels not fully unfolded, dirty panels.Ensure direct, strong sunlight. Fully unfold all panels. Clean panels.
Slow charging via solar panels.Indirect sunlight, cloudy weather, low light conditions.Relocate to direct sunlight. Solar charging is slower than wall charging and is primarily intended for emergencies or supplemental power.
External device not charging.Power bank battery low, faulty cable, incompatible device.Recharge power bank. Try a different charging cable. Ensure device is compatible.
Flashlight not working.Power button not held long enough, power bank battery low.Press and hold the power button for 3 seconds. Recharge power bank.

Specifications

FeatureDetail
Model NumberHI-S025
Battery Capacity25000 Milliamp Hours
Solar Panels4 Foldable Solar Panels
ConnectivityUSB Type A, USB Type C
Special FeaturesBuilt-in Flashlight, Fast Charging, Over Charging Protection, Short Circuit Protection
Product Dimensions6.18 x 3.54 x 1.38 inches
Item Weight1.21 pounds
ManufacturerDongguan Jili Intelligent Technology Co., Ltd.

Warranty and Support

This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or any inquiries regarding your Hiluckey Solar Charger, please contact Hiluckey US directly through their official channels or the retailer where the product was purchased. Please retain your proof of purchase for warranty service.

Official Product Video

Video: An overview of the Hiluckey solar charger, highlighting its 25000mAh capacity and four solar panels. Provided by Hiluckey US.

Related Documents - HI-S025

Preview Hiluckey Solar Power Bank T11W - Declaration of Conformity
EU Declaration of Conformity for the Hiluckey Solar Power Bank, Model T11W. Details manufacturer information, product specifications, and compliance with relevant European directives including RoHS and RED.
Preview KEYENCE IL-1000 Amplifier Unit: Specifications, Dimensions, and Wiring
Comprehensive data sheet for the KEYENCE IL-1000 amplifier unit, detailing its specifications, physical dimensions, and I/O circuit connection diagram for DIN-rail mounting applications.
Preview Instrument Systems LGS Goniometer System Solutions for LED & SSL Analysis
Discover the Instrument Systems LGS Goniometer System Solutions, a comprehensive turnkey system for high-end analysis of LED and SSL products. Featuring precise photometric and spectroradiometric measurements, versatile software, and detailed technical specifications for models like LGS 1000, LGS 650, and LGS 350.
Preview KEYENCE IL Series CMOS Multi-Function Analog Laser Sensor User's Manual
User's manual for the KEYENCE IL Series CMOS Multi-Function Analog Laser Sensor. Provides detailed information on operations, installation, safety precautions, specifications, and troubleshooting for industrial laser sensor applications.
Preview KEYENCE IL Series: CMOS Multi-Function Analogue Laser Sensors - High-Performance Displacement Measurement
Explore the KEYENCE IL Series of CMOS multi-function analogue laser sensors, offering stable detection, high performance, and versatile applications for industrial automation. Features include tuning-less operation, wide detection ranges, and advanced algorithms.
Preview KEYENCE IL Series CMOS Multi-Function Analog Laser Sensor User's Manual
This user's manual provides detailed information on the KEYENCE IL Series CMOS Multi-Function Analog Laser Sensor, covering installation, operation, safety precautions, specifications, and troubleshooting for industrial applications.