Introduction
Thank you for choosing the Hanpusen BR-3 Wireless Camera Remote Control. This device is designed to provide convenient and precise control over your compatible Sony camera, enhancing your photography and videography experience. Featuring an OLED screen, USB-C rechargeable battery, and a range of functions, the BR-3 remote control offers flexibility and ease of use for various shooting scenarios.
Setup Guide
1. Package Contents
Before you begin, please ensure all items are present in the package:
- Hanpusen BR-3 Wireless Remote Control
- USB Type-C Charging Cable
- Lanyard
- User Manual
Image: Package contents of the Hanpusen BR-3 remote control.
2. Charging the Remote Control
The BR-3 remote control features a built-in rechargeable battery. Before first use, fully charge the device.
- Connect the provided USB Type-C cable to the charging port on the remote control.
- Connect the other end of the USB cable to a 5V power source (e.g., USB wall adapter, computer USB port, power bank).
- The OLED screen will indicate charging status. A full charge provides up to 10 hours of operation.
Image: The remote control being charged via its USB-C port.
3. Pairing with Your Sony Camera
Follow these steps to establish a Bluetooth connection between the BR-3 remote and your Sony camera:
- On your Sony camera, navigate to the MENU.
- Go to Network > Bluetooth.
- Select Bluetooth Function and set it to On.
- Select Bluetooth Rmt Ctrl and set it to On.
- Choose Pairing on your camera. The camera will enter pairing mode.
- On the BR-3 remote control, press and hold the Pair button (located at the bottom right) for at least 2 seconds. The remote's OLED screen will display "Scanning" then "Pairing".
- When a confirmation message appears on your camera's screen, select OK. Once pairing is complete, the remote's screen will show "Paired" or "OK!".
Image: Visual guide for pairing the remote control with a Sony camera.
Operating Instructions
1. Button Functions
Familiarize yourself with the buttons on your BR-3 remote control:
- Power Button (bottom left): Press and hold to turn the remote control on or off.
- Shutter Release Button (center): Half-press for autofocus, full-press to capture a still image.
- REC (Record) Button (top right, red): Starts and stops video recording.
- Z/F (Zoom/Focus) Mode Button (bottom left, below shutter): Toggles between Zoom and Focus adjustment modes for the +/- buttons.
- +/- Buttons (top left/right): Adjust zoom (telephoto/wide-angle) or fine-tune focus, depending on the selected Z/F mode.
- AF-ON Button (middle left): Activates the autofocus function, similar to the AF-ON button on your camera.
- C1 Button (middle right): Activates the custom function assigned to the C1 button on your camera.
- Pair Button (bottom right): Used for Bluetooth pairing.
Image: Detailed view of the remote control buttons and their labels.
2. Shooting Modes
The BR-3 remote supports various shooting modes:
- Still Image: Press the Shutter Release button to capture a photo. Half-press for autofocus, then full-press to shoot.
- Record Video: Press the REC button to start recording. Press again to stop.
- Bulb Shooting: When your camera is set to Bulb mode, use the Shutter Release button to control long exposures.
- Continuous Shooting: If your camera is in continuous shooting mode, the remote will trigger continuous shots.
Image: Visual representation of various shooting modes available with the remote.
3. Adjusting Focus and Zoom
The Z/F button allows you to switch between focus and zoom control for the +/- buttons.
- Press the Z/F button to cycle between Zoom (Z) and Focus (F) modes. The OLED screen will indicate the current mode.
- In Focus (F) mode, use the +/- buttons to fine-tune the camera's focus. (Note: For manual focus adjustment, your camera must be in manual focus mode).
- In Zoom (Z) mode, use the +/- buttons to zoom in (Telephoto) or zoom out (Wide-angle). (Zoom function depends on camera and lens support for power zoom or digital zoom).
Image: Remote control used to adjust focus and zoom on a camera.
4. OLED Display Indicators
The OLED screen provides real-time status and settings information:
- "S" Symbol: Indicates the remote is configured for Sony cameras.
- Bluetooth Icon: Shows Bluetooth connection status (scanning, paired, signal strength).
- Battery Icon: Displays the remaining battery level of the remote control.
- Camera Icon: Indicates still image shooting mode.
- Video Camera Icon: Indicates video recording mode.
- "Z" Symbol: Indicates zoom adjustment mode.
- "F" Symbol: Indicates focus adjustment mode.
- "T+" / "W-" Symbols: Indicate telephoto zoom in and wide-angle zoom out, respectively.
Image: The remote's OLED display showing different status and setting visualizations.
Compatible Sony Camera Models
The Hanpusen BR-3 Wireless Camera Remote Control is compatible with the following Sony camera models:
- ZV-E1, ZV-1F, ZV-1II, ZV-1, ZV-E10II, ZV-E10
- A6700, A6600, A6400 (with Ver. 2.00 firmware update), A6100
- A9 (with Ver. 6.00 firmware update), A9II, A9III
- A1 II, A1
- A7C, A7CII, A7CR
- A7SIII
- A7 IV, A7 III (with Ver. 3.00 firmware update)
- A7R V, A7R IV, A7R IVa, A7R III (with Ver. 3.00 firmware update), A7R IIIa
- DSC-RX100 VII, RX0 II (with Ver. 2.00 firmware update)
- FX3, FX30
- ILX-LR1
Please ensure your camera's firmware is updated to the specified version for full compatibility where noted.
Image: A visual list of compatible Sony camera models.
Product Specifications
| Model Number | BR-3 |
| Brand | Hanpusen |
| Connectivity | Bluetooth |
| Operating Range | Up to 10m (32.8ft) |
| Battery Type | Built-in Rechargeable Battery |
| Charging Port | USB Type-C |
| Battery Life | Up to 10 hours (fully charged) |
| Dimensions | Approximately 3.9 x 1.3 x 0.6 inches (9.9 x 3.3 x 1.5 cm) |
| Item Weight | Approximately 2.39 ounces (67.7 grams) |
| Color | White (as per current variant) |
| Special Features | OLED Display, Firmware Update Support, Multifunction Control |
Troubleshooting
- Remote not pairing:
Ensure both the remote and camera have sufficient battery. Check that Bluetooth is enabled on your camera and the camera is in pairing mode. Make sure the remote is within the 10m operating range. Try restarting both the camera and the remote control. - Functions not working (e.g., zoom, focus):
Verify that your camera model and its current firmware version are compatible with the remote's specific functions. Some functions, like power zoom, depend on the lens attached to your camera. Ensure the remote is in the correct mode (Zoom or Focus) using the Z/F button. - Recording or shutter release not responding:
Confirm the remote is successfully paired. Check your camera's settings to ensure it's configured to accept remote control input for shutter and video functions. For video recording, some cameras require specific settings for the shutter button function. - OLED screen is blank:
The remote might be off or the battery is depleted. Press and hold the power button to turn it on, or connect it to a USB-C charger.
Maintenance
- Keep the remote control dry. Do not expose it to moisture or liquids.
- Clean the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid dropping or subjecting the remote to strong impacts.
- Regularly charge the remote control, even if not in frequent use, to maintain battery health.
Warranty Information
Hanpusen products are covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included in your product packaging or visit the official Hanpusen website for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or support regarding your Hanpusen BR-3 Wireless Camera Remote Control, please contact our customer support team:
- Email: support@hanpusen.com
- Website: Visit the Hanpusen Store on Amazon for FAQs and additional product information.
Our support team is available to assist you during business hours.
