1MORE P20 USB-C Wired Earphones Instruction Manual

Introduction

The 1MORE P20 USB-C Wired Earphones are designed to provide a high-quality audio experience with powerful sound, clear call quality, and ergonomic comfort. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your earphones.

Image: The 1MORE P20 USB-C Wired Earphones, showcasing their sleek black design and the Hi-Res Audio certification.

Setup

1. Ear Tip Selection and Fit

For optimal sound quality and comfort, select the ear tips that best fit your ears. The earphones come with various sizes of silicone ear tips. Gently insert the earphones into your ear canals at a 45° angle until they feel secure and comfortable. A proper seal is crucial for effective acoustic isolation and bass response.

2. Connecting to Your Device

The 1MORE P20 earphones feature a USB-C connector for direct plug-and-play compatibility. Simply plug the USB-C connector into the USB-C port of your smartphone, tablet, iPad, or other compatible digital device. No additional drivers or software are typically required.

Operating Instructions

1. Audio Playback

Once connected, your device should automatically recognize the earphones. Begin playing audio from your preferred application. The earphones support Hi-Res Stereo Audio for a detailed and immersive listening experience.

2. Volume Control

The in-line remote control allows you to adjust the volume. Use the '+' button to increase volume and the '-' button to decrease volume. Short press the center button to play/pause music or answer/end calls.

3. Call Management

The earphones are equipped with an advanced MEMS microphone and AI ENC noise suppression technology for clear voice capture during calls. To answer an incoming call, short press the center button. To end a call, short press the center button again. To reject a call, long press the center button.

Image: Illustration of the one-touch microphone mute function. Long press '-' to mute instantly, long press '+' to unmute.

4. Microphone Mute Function

To instantly mute the microphone during a call, long press the '-' button on the in-line remote. To unmute, long press the '+' button.

Maintenance

1. Cleaning

• Regularly clean the ear tips with a soft, dry cloth to remove earwax and debris.
• Wipe the earphone bodies and cable with a slightly damp cloth, then dry thoroughly.
• Do not use harsh chemicals or abrasive materials for cleaning.

2. Storage

When not in use, store the earphones in a clean, dry place, preferably in a protective pouch, to prevent tangling and damage to the cable or drivers.

Troubleshooting

• No Sound:
  • Ensure the USB-C connector is fully inserted into your device.
  • Check the volume level on both your device and the earphone remote.
  • Test the earphones with another device to rule out device-specific issues.
• Poor Sound Quality:
  • Ensure ear tips provide a proper seal in your ear canal. Try different sized ear tips.
  • Clean any debris from the earphone nozzles.
  • Check if the audio source quality is high.
• Microphone Not Working:
  • Ensure the microphone is not muted (check the mute function using the in-line remote).
  • Verify microphone settings on your connected device.
  • Ensure the USB-C connection is secure.

Specifications

Image: An exploded view illustrating the 10mm Diamond-Like Carbon (DLC) dynamic driver, responsible for the powerful and compact sound.

Image: A woman enjoying music with the 1MORE P20 earphones, highlighting the Hi-Res Audio capability and immersive sound.

Warranty and Support

For warranty information or technical support, please refer to the official 1MORE website or contact their customer service directly. Keep your purchase receipt for warranty claims.