KOTEK 3 Piece Patio Furniture Rocking Bistro Set User Manual

Introduction

Thank you for choosing the KOTEK 3 Piece Patio Furniture Rocking Bistro Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor furniture. Please read these instructions carefully before assembly and retain them for future reference.

Image: The KOTEK 3 Piece Patio Furniture Rocking Bistro Set, featuring two rocking chairs with grey cushions and a square glass-top side table, arranged on an outdoor patio.

Safety Information

• Weight Capacity: Do not exceed the weight capacity of 400 lbs (181 kg) for each rocking chair. The coffee table has a weight capacity of 100 lbs (45 kg). Exceeding these limits may cause damage or injury.
• Assembly: Ensure all screws are properly aligned and tightened during assembly to prevent instability. Do not fully tighten screws until all components are correctly positioned.
• Placement: Place the furniture on a flat, stable surface to prevent tipping.
• Children: Keep children away from the assembly area. Small parts can be a choking hazard.
• Weather Conditions: While the PE rattan is weatherproof, consider covering or storing the furniture during extreme weather conditions to prolong its lifespan.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• 2 x Rocking Chairs
• 1 x Square Coffee Table with Tempered Glass Top
• 2 x Seat Cushions
• 2 x Back Cushions
• Assembly Hardware (screws, washers, Allen wrench)

Setup and Assembly

Assembly is required for this product. Follow these steps carefully:

1. Unpack all components and lay them out on a clean, soft surface to prevent scratching.
2. Identify all parts and hardware using the included parts list (not provided in this manual, refer to your product packaging).
3. Begin assembling the chair frames. Attach the backrest to the seat frame, then connect the armrests.
4. Important Tip: Align all holes before fully tightening any screws. Once all parts are loosely connected, gradually tighten all screws securely.
5. Attach the rocking bases to the bottom of the chairs, ensuring the anti-slip rubber mats and bottom stoppers are correctly positioned.
6. Assemble the coffee table by attaching the legs to the tabletop frame. Place the tempered glass top securely on the table, ensuring it is fixed by the suction cups.
7. Place the seat and back cushions onto the assembled chairs.

Image: A diagram illustrating the dimensions of the rocking chair (31.5" L x 26" W x 31.5" H) and the coffee table (18" L x 18" W x 18" H), including cushion thickness.

Operating Instructions

Your KOTEK Rocking Bistro Set is designed for comfortable outdoor relaxation.

• Rocking Chairs: The chairs feature a smooth and steady rocking design. Sit comfortably, ensuring your weight is evenly distributed. The bottom stoppers with non-slip rubber mats provide a gentle yet stable glide.
• Coffee Table: Use the tempered glass side table for drinks, snacks, or decorative items. The spacious tabletop is scratch-resistant and easy to clean.

Image: A diagram showing the rocking motion of the chair, highlighting the anti-slip rubber mats and bottom stopper for stability.

Image: A close-up view of the chair cushions, emphasizing their 5.5-inch thickness, high-density fillings, and smooth zippers for easy removal.

Maintenance

Proper care will extend the life and appearance of your patio set.

• Cushions: The cushion covers are removable with smooth zippers for easy cleaning. Hand wash or machine wash on a gentle cycle with cold water. Air dry only. Do not bleach or iron.
• PE Rattan: Wipe the PE rattan with a damp cloth and mild soap. Rinse thoroughly and dry completely. Avoid harsh chemicals or abrasive cleaners.
• Metal Frame: Clean the metal frame with a damp cloth. Inspect regularly for any signs of rust or damage.
• Tempered Glass Tabletop: Clean with a glass cleaner and a soft cloth. Avoid using abrasive materials that could scratch the surface.
• Storage: During off-season or prolonged periods of non-use, it is recommended to cover the furniture or store it indoors to protect it from harsh weather and extend its lifespan.

Troubleshooting

If you encounter any issues with your KOTEK Patio Furniture, refer to the following common solutions:

• Wobbly Chairs/Table: Check all screws and bolts to ensure they are securely tightened. Sometimes, uneven tightening during assembly can cause instability. Loosen all screws slightly, adjust the furniture on a flat surface, and then re-tighten them evenly.
• Difficulty Rocking: Ensure the chairs are placed on a smooth, level surface. Check the bottom stoppers and anti-slip mats for any obstructions or damage.
• Cushions Not Fitting Correctly: Ensure the cushions are placed on the correct chairs. If they appear compressed, allow some time for them to expand after unpacking.
• Glass Tabletop Movement: Verify that the suction cups underneath the glass are properly attached to both the glass and the table frame. Press down firmly on the glass to ensure a secure fit.

If these steps do not resolve the issue, please contact customer support.

Specifications

Warranty Information

Specific warranty details for this KOTEK product are not provided in this manual. Please refer to your purchase documentation or contact KOTEK customer support for information regarding warranty coverage and terms.

Customer Support

For any questions, missing parts, or assistance with assembly or operation, please contact KOTEK customer support. You can typically find contact information on the product packaging or the seller's website.

Seller: KOTEKUS

Please have your model number (PI-HW731) and purchase date available when contacting support.