AIPER Scuba SE Grey
AIPER Scuba SE Grey Robotic Pool Vacuum with Pilot H2 Handheld Pool Vacuums User Manual
Model: Scuba SE Grey
1. Introduction
This user manual provides comprehensive instructions for the safe and efficient operation and maintenance of your AIPER Scuba SE Grey Robotic Pool Vacuum and Pilot H2 Handheld Pool Vacuum. Please read this manual thoroughly before first use and retain it for future reference.
2. Safety Instructions
WARNING: Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and serious injury.
- Read all instructions before operating the appliance.
- Do not operate the cleaner if the power cord or plug is damaged.
- Ensure the pool cleaner is fully submerged in water before operation.
- Keep children and pets away from the pool area during operation.
- Only use the charger supplied by the manufacturer.
- Disconnect the cleaner from the power supply before performing any maintenance or cleaning.
- Store the cleaner in a cool, dry place when not in use.
3. Package Contents
Verify that all items are present in the package:
- AIPER Scuba SE Grey Robotic Pool Vacuum
- AIPER Pilot H2 Handheld Pool Vacuum
- Charging Adapter for Robotic Vacuum
- Charging Adapter for Handheld Vacuum
- User Manual (this document)

4. Setup
4.1. AIPER Scuba SE Robotic Pool Vacuum
- Initial Charging: Before first use, fully charge the robotic pool vacuum. Connect the charging adapter to the vacuum and a power outlet. The charging indicator will show the status. A full charge typically takes approximately 3 hours.

Image 4.1.1: The robotic pool vacuum connected to its charger, indicating charging status. - Placement in Pool: Gently lower the robotic vacuum into the pool. Ensure it is fully submerged and no air bubbles are trapped inside.
4.2. AIPER Pilot H2 Handheld Pool Vacuum
- Initial Charging: Fully charge the Pilot H2 handheld vacuum before its first use. Connect the charging adapter to the vacuum and a power outlet. The charging dock is upgradable.

Image 4.2.1: The Pilot H2 handheld vacuum on its charging dock, highlighting the upgradable charging feature. - Assembly (if required): Attach the desired vacuum head (straight-line for corners or brush-tipped for pool floor/steps) to the main unit.

Image 4.2.2: The Pilot H2 handheld vacuum demonstrating its two interchangeable vacuum heads: one for corners and one for general pool floor/steps.
5. Operating Instructions
5.1. AIPER Scuba SE Robotic Pool Vacuum
- Power On: Once submerged, press the power button to start the cleaning cycle. The robotic vacuum will begin its cleaning path.

Image 5.1.1: The robotic pool vacuum in operation, showcasing its hydro dynamic design for efficient cleaning. - Cleaning Cycle: The vacuum will clean the pool floor for approximately 90 minutes on a full charge, covering up to 860 square feet.

Image 5.1.2: The robotic pool vacuum illustrating its extended battery life, capable of cleaning pools up to 860 sq.ft for 90 minutes. - Self-Parking Function: Upon completion of its cleaning cycle or when the battery is low, the robotic vacuum will automatically return to its starting point for easy retrieval.

Image 5.1.3: The robotic pool vacuum demonstrating its self-parking technology, returning to the edge of the pool for effortless retrieval.
5.2. AIPER Pilot H2 Handheld Pool Vacuum
- One-Click Activation: Press the power switch to turn on the handheld vacuum. Long press for 2 seconds to power off.

Image 5.2.1: Close-up of the Pilot H2 handheld vacuum's control panel, showing the power switch and mode selection. - Cleaning Modes: The Pilot H2 offers two cleaning modes:
- Standard Mode: 80 LPM / 21 GPM suction for regular cleaning, with approximately 70 minutes of battery life.
- Power Mode: 110 LPM / 29 GPM suction for more intensive cleaning, with approximately 45 minutes of battery life.

Image 5.2.2: Comparison of the Pilot H2 handheld vacuum's Standard Mode (80L/min) and Power Mode (110L/min) for different cleaning needs. - Using Dual Vacuum Heads: Choose the straight-line vacuum head for cleaning corners and tight spaces. Use the brush-tipped vacuum head for general pool floor and step cleaning.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your pool cleaners.
- Filter Cleaning: After each use, remove and clean the filter basket/bag of both the robotic and handheld vacuums. Rinse thoroughly with a garden hose until all debris is removed.
- Unit Cleaning: Wipe down the exterior of both units with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store both cleaners in a cool, dry, and shaded area when not in use. Ensure they are fully charged before long-term storage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cleaner not moving or operating. | Battery is low or depleted. | Charge the cleaner fully. |
| Poor suction performance. | Filter basket/bag is full or clogged. | Clean the filter basket/bag thoroughly. |
| Cleaner gets stuck. | Obstruction in the pool (toys, large debris). | Remove obstructions from the pool. Reposition the cleaner. |
| Handheld vacuum not turning on. | Battery is low or power button not pressed correctly. | Charge the handheld vacuum. Ensure a long press (2 seconds) for power off. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | AIPER |
| Model Name | Scuba SE Grey |
| Power Source | Battery Powered |
| Battery Type | Rechargeable Lithium-Ion |
| Robotic Vacuum Runtime | Up to 90 minutes |
| Robotic Vacuum Coverage | Up to 860 sq.ft (40 feet) |
| Handheld Vacuum Standard Mode Suction | 80 LPM / 21 GPM |
| Handheld Vacuum Power Mode Suction | 110 LPM / 29 GPM |
| Handheld Vacuum Runtime (Standard Mode) | Approx. 70 minutes |
| Handheld Vacuum Runtime (Power Mode) | Approx. 45 minutes |
| Control Method | Touch |
| Installation Type | Robotic |
| Assembly Required | No (for main units) |
9. Warranty & Support
Warranty Type: Limited Warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact AIPER Customer Service.
- Website: www.aiper.com
- Email: Refer to the product packaging or official website for the most current contact email.
- Phone: Refer to the product packaging or official website for the most current contact number.
When contacting support, please have your product model name (Scuba SE Grey) and purchase information ready.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.