1. Introduction
The SASKATE AN101 Volt Detector is a non-contact AC voltage tester designed for safe and efficient electrical testing. This device features a non-contact voltage (NCV) inductive probe, an integrated LED flashlight, and clear sound and light alarms to indicate the presence of AC voltage. It is an essential tool for electricians, DIY enthusiasts, and anyone needing to safely identify live and neutral wires or detect breakpoints in electrical circuits.
2. Safety Information
WARNING: ALWAYS TEST ON A KNOWN LIVE CIRCUIT BEFORE USE TO ENSURE THE DEVICE IS FUNCTIONING CORRECTLY.
- Do not use the device if it appears damaged or is not operating properly.
- Always follow local safety regulations and procedures when working with electricity.
- This device is designed for non-contact detection. Do not attempt to make direct contact with live conductors.
- Keep the device dry and clean. Do not expose to extreme temperatures or humidity.
- Replace batteries promptly when the low battery indicator appears to ensure accurate readings.
Safety Class: CAT.III 1000V, CAT.IV 600V CE
3. Product Overview
The SASKATE AN101 is a compact and ergonomic voltage detector pen. It features an NCV sensor tip, an LCD display, power and sensitivity buttons, and an integrated LED flashlight.
Image: Angled view of the SASKATE AN101 Volt Detector Pen, showing the red and black body, green LCD screen, and buttons.
Image: Side view of the SASKATE AN101 Volt Detector Pen, clearly displaying 'AN101 AC VOLTAGE DETECTOR' text on its body.
4. Specifications
| Parameter | Value |
|---|---|
| Item Type | Voltage Tester |
| Model | AN101 |
| Material | ABS |
| Battery | 2 x 1.5V AAA Batteries (Not Included) |
| Operating Voltage | AC 12-1000V, 50/60Hz |
| Alarm Mode | Sound and Light Alarm, Display Indication |
| Lighting | White LED Flashlight |
| LCD Indicator | Red for Live Line, Green for Neutral/Ground Line |
| Operating Temperature | 0~40℃ (32-104℉) |
| Storage Temperature | -10~50℃ (14-122℉) |
| Humidity | ≤95% |
| Altitude | ≤2000m |
| Safety Class | CAT.III 1000V, CAT.IV 600V CE |
5. Setup
Battery Installation
- Twist and remove the battery cap at the bottom of the detector.
- Insert two 1.5V AAA batteries, ensuring correct polarity (+/-).
- Replace the battery cap and twist to secure it.
The device will not function without batteries. Ensure batteries are inserted correctly for proper operation.
6. Operating Instructions
General Operation
- Press the power button (red button with power symbol) to turn on the device. The LCD screen will illuminate.
- To turn off, press and hold the power button until the display turns off. The device also features an auto-off function after a period of inactivity to conserve battery life.
Image: Close-up view of the SASKATE AN101's LCD screen displaying 'AC' and battery level, along with the red power button and green sensitivity/flashlight button.
Neutral Wire Identification
Hold the sensor tip of the detector close to the wire or object to be tested. If the simulated grid point on the LCD lights up green and the buzzer beeps slowly, it indicates a neutral wire.
Live Wire Identification
Move the sensor tip of the detector closer to the wire or object to be tested. If the simulated grid point on the LCD lights up red and the buzzer sounds quickly, it indicates a live wire.
NCV Sensitivity Adjustment
The NCV sensitivity can be toggled by pressing the 'S' key (green button with 'S' and flashlight symbol). This allows for adjustment between high and low sensitivity modes, useful for different testing environments or for pinpointing voltage sources.
LED Flashlight
The device is equipped with a bright white LED flashlight. To activate or deactivate the flashlight, briefly press the 'S' key (green button with 'S' and flashlight symbol). This feature is particularly useful for working in dimly lit environments.
7. Maintenance
- Cleaning: Wipe the device with a dry, clean cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the detector in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
- Battery Replacement: Replace batteries as soon as the low battery indicator appears to ensure accurate readings and proper functionality.
8. Troubleshooting
- Device does not turn on: Check if batteries are inserted correctly and have sufficient charge. Replace batteries if necessary.
- Inconsistent readings: Ensure the sensor tip is clean. Move away from strong electromagnetic fields that might interfere with readings. Check battery level.
- No detection: Ensure the device is turned on. Verify the circuit is indeed live by testing on a known live source. Adjust NCV sensitivity if needed.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact SASKATE customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.