SKMEI Digital Sports Watch Model 2318 User Manual

Introduction

Welcome to your new SKMEI Digital Sports Watch Model 2318. This manual provides detailed instructions for setting up, operating, and maintaining your watch. Please read it carefully to ensure proper use and longevity of your device.

Image: Front view of the SKMEI Digital Sports Watch Model 2318, highlighting its digital display and robust design.

Product Overview

The SKMEI Model 2318 features a multi-functional digital display and four control buttons.

Image: Detailed view of the watch face, showing the digital time, date, and various indicators, along with the four control buttons labeled LIGHT, MODE, START, and RESET.

Button Functions

• LIGHT: Activates the EL backlight for illumination.
• MODE: Cycles through different operational modes (Time, Alarm, Stopwatch, Countdown Timer).
• START: Used to start/stop functions in Stopwatch and Countdown modes, and to adjust settings.
• RESET: Used to reset functions in Stopwatch and Countdown modes, and to adjust settings.

Image: Diagram illustrating the watch dimensions, including case width (52.5mm), case thickness (16.2mm), and strap/lug width (30.5mm).

Setup and Basic Operation

Setting Time and Date

1. In Time Mode, press the MODE button until the seconds begin to flash. This indicates you are in setting mode.
2. Press the RESET button to cycle through the setting options: Seconds → Hour → Minute → Month → Date → Day of Week.
3. Use the START button to adjust the flashing value.
4. Once all settings are correct, press the MODE button to exit setting mode.

12/24 Hour Format

While in Time Mode, press the START button to toggle between 12-hour (P for PM) and 24-hour formats.

Operating Modes

Press the MODE button to cycle through the following modes: Time → Stopwatch → Alarm → Countdown Timer.

Stopwatch Mode

1. From Time Mode, press MODE once to enter Stopwatch Mode. The display will show "00:00:00".
2. Press START to begin timing.
3. Press START again to pause timing.
4. Press START to resume timing.
5. Press RESET to clear the stopwatch to "00:00:00".

Alarm Mode

1. From Time Mode, press MODE twice to enter Alarm Mode.
2. Press RESET to select the hour or minute setting. The selected value will flash.
3. Use the START button to adjust the flashing hour or minute.
4. Press MODE to confirm and exit alarm setting.
5. To turn the alarm ON/OFF, press START while in Alarm Mode (not in setting mode). An alarm icon will appear/disappear.
6. To turn the hourly chime ON/OFF, press RESET while in Alarm Mode (not in setting mode). A chime icon will appear/disappear.

Countdown Timer Mode

1. From Time Mode, press MODE three times to enter Countdown Timer Mode.
2. Press RESET to select the hour or minute setting. The selected value will flash.
3. Use the START button to adjust the flashing hour or minute.
4. Press MODE to confirm and exit countdown setting.
5. Press START to begin the countdown.
6. Press START again to pause the countdown.
7. Press RESET to reset the countdown to its initial set time.

EL Backlight

Press the LIGHT button to illuminate the display for a few seconds in low-light conditions.

Image: The watch display illuminated by the EL backlight, demonstrating visibility in low light.

Water Resistance Guidelines

This watch is rated 50M (5 ATM) water resistant. This means it is suitable for daily use, hand washing, rain, and swimming in shallow water.

• Do not press any buttons while the watch is submerged in water.
• Avoid exposure to hot water, steam, or extreme temperature changes, as this can compromise the water seals.
• Not suitable for diving, snorkeling, or high-pressure water activities.

Image: A visual representation of the watch's water resistance, suitable for various water-related activities.

Maintenance

Cleaning

Regularly wipe the watch case and strap with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.

Battery Replacement

When the display dims or functions become erratic, the battery may need replacement. This watch uses a CR2032 battery. It is recommended to have the battery replaced by a qualified watch technician to ensure water resistance is maintained.

Image: The stainless steel back cover of the watch, indicating the model number and battery type.

Troubleshooting

Display is blank or dim

• Check battery level. Replace if necessary.
• Ensure no buttons are stuck.

Watch not keeping accurate time

• Re-set the time and date as per the "Setting Time and Date" section.
• If the issue persists, battery replacement may be required.

Water inside the watch

• Immediately stop using the watch.
• Seek professional repair to prevent further damage.
• Ensure buttons were not pressed underwater.

Specifications

Warranty and Support

This SKMEI watch comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact SKMEI customer support.

For further assistance or inquiries, please visit the official SKMEI website or contact your retailer.