Introduction
This manual provides essential information for the safe and efficient operation of your Sonodyne SAMA 5000 Dolby Atmos Soundbar. Please read these instructions thoroughly before using the product and retain them for future reference.
Safety Information
Observe the following safety precautions to prevent electric shock, fire, or damage to the unit:
- Do not expose the unit to rain or moisture.
- Do not block ventilation openings.
- Ensure proper power supply voltage.
- Avoid placing the unit near heat sources.
- Do not attempt to service the unit yourself. Refer all servicing to qualified personnel.
Package Contents
Verify that all items are present in the packaging:
- Sonodyne SAMA 5000 Soundbar
- Wireless Subwoofer
- Power Cable
- Remote Control
- Warranty Card
- HDMI Cable
Image: The Sonodyne SAMA 5000 soundbar and its accompanying wireless subwoofer, both in black, shown from an elevated front-right perspective.
Setup
1. Placement
Position the soundbar centrally below your television. The wireless subwoofer can be placed anywhere in the room, ideally near a wall for enhanced bass response. The soundbar can be placed on a tabletop or wall-mounted.
Image: A living room setup showing the soundbar placed below a wall-mounted television and the subwoofer positioned on the floor to the left of the TV console.
2. Connections
- HDMI eARC/ARC: For optimal audio quality and control, connect an HDMI cable from the soundbar's "HDMI OUT (eARC/ARC)" port to your TV's HDMI ARC/eARC port. This supports 4K Dolby Vision Pass-Through.
- Optical: If your TV does not have an ARC/eARC port, connect an optical cable from the soundbar's "OPTICAL" port to your TV's optical output.
- Aux In: For analog audio sources, use a 3.5mm audio cable to connect to the "AUX IN" port.
- USB: Insert a USB drive for media playback.
- Power: Connect the power cables to the soundbar and subwoofer, then plug them into a power outlet.
Image: A close-up view of the rear panel of the Sonodyne SAMA 5000 soundbar, showing the HDMI IN, HDMI OUT (eARC/ARC), USB, AUX IN, and OPTICAL ports.
3. Wireless Subwoofer Pairing
The subwoofer should automatically pair with the soundbar upon powering on. If pairing fails, ensure both units are powered on and within range. Refer to the troubleshooting section if issues persist.
Operating Instructions
Controls
The soundbar features touch controls on its top panel and can also be operated via the included remote control.
Image: A close-up of the top panel of the Sonodyne SAMA 5000 soundbar, displaying illuminated touch controls for power, input selection, volume adjustment, and Bluetooth pairing.
Input Selection
Press the "Input" button on the remote or the soundbar's top panel to cycle through available inputs: HDMI eARC, Optical, Aux, USB, and Bluetooth.
Sound Modes
The SAMA 5000 offers optimized sound modes for different content types, achieved through DSP balance:
- Movie Mode: Focuses on overall immersive and dynamic effects with clear dialogue.
- Music Mode: Delivers balanced, detailed response for music. Offers a Dolby mode option to engage the center channel, or sound from L, R, and Sub.
- Speech Mode: Subtly boosts dialogue clarity, which may be needed for older or non-OTT content.
Bluetooth Pairing
To pair a Bluetooth device:
- Select Bluetooth input on the soundbar.
- Enable Bluetooth on your device and search for "SAMA 5000".
- Select the soundbar to pair.
Maintenance
- Clean the soundbar and subwoofer with a soft, dry cloth.
- Do not use liquid cleaners or abrasive materials.
- Ensure proper ventilation around the units.
Troubleshooting
| Problem | Solution |
|---|---|
| No sound from soundbar. |
|
| Subwoofer not pairing. |
|
| Remote control not working. |
|
| Soundbar turns off automatically. | The unit has an auto-standby feature after 15 minutes of inactivity. This cannot be disabled. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | SAMA 5000 |
| Speaker Type | Soundbar |
| Surround Sound Channel Configuration | 3.1 |
| Speaker Maximum Output Power | 400 Watts |
| Connectivity Technology | Auxiliary, Bluetooth, HDMI, Optical |
| HDMI eARC/ARC | Yes, with 4K Dolby Vision Pass-Through |
| Dolby Support | Dolby Atmos, Dolby Digital |
| Subwoofer Diameter | 6.5 Inches |
| Subwoofer Connectivity | Wireless |
| Control Method | Remote |
| Product Dimensions (Soundbar) | 88W x 6.6H x 13D Centimeters |
| Item Weight | 11 Kilograms (total) |
| Mounting Type | Wall Mount / Tabletop |
| Country of Origin | India |
Warranty Information
The Sonodyne SAMA 5000 comes with a Limited Warranty. Please refer to the included Warranty Card for specific terms, conditions, and duration of coverage. Retain your purchase receipt as proof of purchase for warranty claims.
Customer Support
For technical assistance, service, or further inquiries, please contact Sonodyne customer support. Contact details can be found on the official Sonodyne website or on the Warranty Card provided with your product.
You may also visit the Sonodyne Store on Amazon for additional product information.
