1. Introduction
Thank you for choosing the Yoglad Extendable Dining Table W331S. This manual provides essential information for the safe assembly, operation, maintenance, and care of your new dining table. Please read these instructions thoroughly before assembly and retain them for future reference.
The Yoglad W331S is a versatile dining table designed to adapt to your space, extending from 55.12 inches to 70.87 inches to comfortably seat 4 to 6 people. It features a sturdy X-base design and a durable, scratch-resistant surface.
2. Safety Information
- Always assemble the table on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as needed.
- Do not stand or sit on the table.
- Keep small parts away from children during assembly to prevent choking hazards.
- Distribute weight evenly across the tabletop. Avoid placing excessively heavy items on one side.
- Use caution when extending or retracting the table to avoid pinching fingers.
- This product contains wood dust, a substance known to the State of California to cause cancer.
3. Package Contents
Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop Sections (Main and Extension Leaf)
- X-Base Support Structure
- Base Plate
- Assembly Hardware (screws, bolts, washers, Allen wrench)
- Instruction Manual

4. Setup and Assembly
Assembly typically takes approximately 25 minutes. Follow the numbered steps and visual guide provided in the separate assembly sheet for detailed instructions.
- Unpack all components and lay them out on a clean, soft surface to prevent damage.
- Attach the X-Base support structure to the base plate using the provided hardware. Ensure all connections are firm.
- Carefully place the main tabletop section upside down on the soft surface.
- Align the assembled X-Base with the pre-drilled holes on the underside of the main tabletop section. Secure it with the appropriate screws.
- If the extension mechanism is pre-assembled, ensure it moves smoothly. If not, follow the specific instructions for attaching the extension glides.
- Carefully turn the table upright.
- Insert the extension leaf into the designated slot in the center of the table, following the operating instructions below.
- Verify that the table is stable and all connections are secure before use.

5. Operating Instructions (Table Extension)
The Yoglad W331S table features a smooth extension mechanism to easily adjust its length.
- To Extend the Table:
- Unlock any locking mechanisms under the tabletop that secure the two main halves together.
- Gently pull the two main tabletop halves apart from the center. The extension glides will allow them to separate smoothly.
- Retrieve the extension leaf (typically stored separately or within the table structure).
- Place the extension leaf into the gap created between the two main tabletop halves. Ensure it sits flush and is properly aligned.
- Push the two main tabletop halves back towards the center until they meet the extension leaf and lock into place.
- Engage any locking mechanisms under the table to secure the extended tabletop.
- To Retract the Table:
- Unlock any locking mechanisms under the tabletop.
- Gently pull the two main tabletop halves apart, creating a gap.
- Carefully remove the extension leaf and store it in a safe place.
- Push the two main tabletop halves back together until they meet in the center.
- Engage any locking mechanisms to secure the compact tabletop.

6. Maintenance and Care
Proper care will ensure the longevity and appearance of your Yoglad dining table.
- Cleaning: The table features a spill-proof and scratch-resistant surface. For daily cleaning, wipe with a soft, damp cloth. For spills, wipe immediately with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Protection: Although the surface is scratch-resistant, using placemats or coasters is recommended for hot dishes and to prevent potential marks from sharp objects.
- Stability Check: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain table stability.
- Environmental Conditions: Avoid exposing the table to extreme temperature changes or direct, prolonged sunlight, which can cause warping or fading.

7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly. | Loose fasteners; uneven floor. | Check and tighten all screws and bolts. Ensure the table is on a level surface. Use furniture pads if necessary. |
| Extension mechanism is stiff. | Dust or debris in glides; locking mechanism engaged. | Clean the glides with a dry cloth. Ensure all locking mechanisms are disengaged before attempting to extend/retract. |
| Tabletop sections do not align properly. | Improper placement of extension leaf; loose connections. | Ensure the extension leaf is correctly seated. Check that the main tabletop sections are fully pushed together and locked. Verify base connections are secure. |
8. Specifications
- Model: W331S
- Brand: Yoglad
- Material: Engineered Wood (Tabletop, Frame), Steel (X-Base accents)
- Color: Walnut
- Product Dimensions (Compact): 33.46"D x 55.12"W x 29.53"H
- Product Dimensions (Extended): 33.46"D x 70.87"W x 29.53"H
- Seating Capacity: 4-6 persons
- Weight Capacity: Approximately 350 lbs
- Assembly Required: Yes
- Style: Modern Farmhouse
9. Warranty and Support
Yoglad is committed to providing high-quality products. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Yoglad website.
If you encounter any issues during assembly or use, or if you have questions about your Yoglad Extendable Dining Table W331S, please contact our dedicated customer support team. We are available to assist you with a smooth experience.
Customer Support: Please refer to your purchase documentation or the Yoglad brand store for contact information. Visit the Yoglad Store on Amazon