Introduction
This manual provides comprehensive instructions for the VINABTY Replacement Remote Control, model 105000313 SSBDA13E. This remote is designed as a direct replacement for SANDSTROM Sound Bar remote controls, specifically compatible with models SSBDA13E and 105000313. It features an ergonomic design for comfortable handling and requires no programming or complex setup; simply insert batteries to begin operation.
Safety Information
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Always remove exhausted batteries promptly to prevent leakage and damage.
- Dispose of batteries according to local regulations.
Package Contents
- 1 x VINABTY Replacement Remote Control (Model: 105000313 SSBDA13E)
Product Overview
The VINABTY Replacement Remote Control is a compact and lightweight device, measuring approximately 12 x 6 x 1 cm and weighing 50 grams. It operates using infrared technology and has a maximum effective range of 10 meters. Below is an illustration of the remote control with its key buttons and their functions.
Image 1: Front view of the VINABTY Replacement Remote Control, highlighting its ergonomic design and button layout. Dimensions are approximately 8.6 cm (3.39 in) in length and 4 cm (1.57 in) in width.
Image 2: Side view of the VINABTY Replacement Remote Control, illustrating its slim profile.
Button Functions
- Power (⏻): Turns the sound bar on or off.
- DIM: Adjusts the brightness of the sound bar's display.
- SCAN: Initiates scanning for radio stations.
- PROG: Accesses programming functions.
- SOURCE: Selects the input source (e.g., AUX, Bluetooth, Optical).
- MENU: Opens the sound bar's main menu.
- INFO: Displays information about the current track or settings.
- Navigation Buttons (▲, ▼, ◄, ►): Navigates through menus and options.
- OK: Confirms selections.
- Rewind (⏮): Skips to the beginning of the current track or previous track.
- Fast Forward (⏭): Skips to the next track.
- EQ: Cycles through equalizer presets.
- BASS: Adjusts bass levels.
- MUTE: Mutes or unmutes the sound.
- VOL- / VOL+: Decreases or increases the volume.
- SLEEP: Sets the sleep timer.
- TIMER: Accesses timer settings.
- CLOCK: Sets or displays the clock.
Setup
Battery Installation
This remote control requires batteries for operation (batteries are not included).
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch (if present) to open the compartment.
- Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
The remote control is now ready for use with your compatible SANDSTROM Sound Bar.
Operating Instructions
This replacement remote control functions identically to your original SANDSTROM Sound Bar remote. No programming or pairing is required.
- Power On/Off: Press the Power button to turn your sound bar on or off.
- Volume Control: Use the VOL+ and VOL- buttons to adjust the audio volume.
- Source Selection: Press the SOURCE button to cycle through available input sources (e.g., Bluetooth, Optical, AUX).
- Mute Audio: Press the MUTE button to temporarily silence the sound. Press again to restore audio.
- Menu Navigation: Use the MENU button to access settings, and the navigation arrows (▲, ▼, ◄, ►) with the OK button to make selections.
Refer to your SANDSTROM Sound Bar's original manual for specific functions and advanced settings.
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage. Store in a cool, dry place.
Troubleshooting
| Problem | Solution |
|---|---|
| Remote control is not working. |
|
| Remote control range is reduced. |
|
Specifications
| Brand | VINABTY |
| Model | 105000313 SSBDA13E |
| Compatible Devices | SANDSTROM Sound Bar (SSBDA13E, 105000313) |
| Connectivity Technology | Infrared |
| Controller Type | Button Control |
| Maximum Range | 10 Meters |
| Color | Black |
| Batteries Required | Yes (2x AAA, not included) |
| Product Dimensions | 12 x 6 x 1 cm |
| Item Weight | 50 Grams |
Support
For any product or service issues, please contact us for assistance. We aim to provide a satisfactory response within 24 hours.
