AXEFIT TT200C Under Desk Treadmill User Manual

1. Introduction

This manual provides essential information for the safe and effective operation and maintenance of your AXEFIT TT200C Under Desk Treadmill. Please read this manual thoroughly before initial use and retain it for future reference.

Image 1.1: The AXEFIT TT200C Under Desk Treadmill, a compact and portable fitness device.

2. Important Safety Information

To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your treadmill before use. AXEFIT assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

3. Package Contents

Carefully unpack your AXEFIT TT200C Treadmill and verify that all components are present and undamaged. If any items are missing or damaged, please contact customer support.

• AXEFIT TT200C Treadmill Unit
• Power Cord
• Safety Key
• Tool Kit (L-shaped wrench)
• User Manual (this document)
• Lubricating Oil (x2 bottles)
• Remote Control Battery (CR2450 Lithium Cell 3V)

Image 3.1: Included components with the AXEFIT TT200C Treadmill.

4. Setup

4.1 Unpacking and Placement

1. Remove the treadmill from its packaging.
2. Place the treadmill on a firm, level surface. Ensure adequate space around the unit for safe operation.
3. The treadmill is equipped with front transport wheels for easy movement. To move, lift the rear of the treadmill and roll it to the desired location.

4.2 Assembly

The AXEFIT TT200C Treadmill comes 90% pre-assembled. Complete assembly typically takes less than 10 minutes.

1. Carefully lift the handle frame into the upright position.
2. Secure the handle frame using the provided 4 screws and the L-shaped wrench.
3. Plug the power cord into a grounded electrical outlet.
4. Insert the safety key into its designated slot on the console. The treadmill will not operate without the safety key in place.

5. Operating Instructions

5.1 LED Control Panel

The treadmill features an LED display that cycles through various metrics during your workout.

Image 5.1: The LED Control Panel shows real-time workout data.

• Time: Duration of your workout.
• Speed: Current speed of the running belt (in MPH).
• Distance: Total distance covered during the workout.
• Calories: Estimated calories burned.

5.2 Using the Remote Control

The treadmill is operated via a remote control. Ensure the remote control has a working CR2450 battery and is aimed directly at the treadmill's IR receiver for optimal response.

• Start/Stop: Press to begin or end a workout.
• Speed +/-: Adjust the running belt speed. Quick speed buttons (e.g., 2, 4, 6 MPH) are also available on the control panel for seamless adjustments.
• Pause/Resume: Press the pause button to temporarily stop your exercise and continue anytime.

5.3 Adjusting Incline

The AXEFIT TT200C features a 15° manual incline for varied workout intensity. This adjustment is manual and should be set before starting your workout.

Image 5.2: The manual incline feature allows for increased calorie burn.

To adjust the incline, carefully lift the rear of the treadmill and position the support legs to the desired incline level. Ensure the treadmill is stable before use.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your treadmill.

6.1 Lubrication

The running belt requires periodic lubrication to reduce friction and extend its lifespan. Use the provided lubricating oil.

1. Turn off and unplug the treadmill.
2. Loosen the rear roller bolts to slightly lift the running belt.
3. Apply a small amount of lubricating oil evenly under the center of the running belt.
4. Tighten the rear roller bolts.
5. Plug in the treadmill and run it at a low speed (e.g., 1 MPH) for 5 minutes to distribute the lubricant.

6.2 Cleaning

Wipe down the treadmill surfaces with a damp cloth after each use. Avoid using abrasive cleaners. Regularly vacuum around and under the treadmill to prevent dust buildup.

6.3 Belt Adjustment

If the running belt becomes off-center or slips, it may need adjustment. Use the provided L-shaped wrench.

• To center the belt: If the belt drifts to the left, turn the left rear roller bolt clockwise a quarter turn. If it drifts to the right, turn the right rear roller bolt clockwise a quarter turn. Run the treadmill at a low speed and observe. Repeat as necessary.
• To tighten the belt: If the belt slips, turn both rear roller bolts clockwise a quarter turn simultaneously. Test the belt and repeat if necessary. Do not overtighten.

7. Troubleshooting

8. Specifications

Image 8.1: AXEFIT motor advantages, including a 4000-hour lifespan and noise level below 45dB.

Image 8.2: The treadmill features a 5-layer running belt and 8 shock absorbers for joint protection.

Image 8.3: The extra-wide running belt provides a comfortable and secure workout surface.

9. Warranty and Support

9.1 Warranty Information

The AXEFIT TT200C Under Desk Treadmill comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper maintenance.

9.2 Customer Support

For technical assistance, warranty claims, or any questions regarding your AXEFIT TT200C Treadmill, please contact AXEFIT customer support. Refer to the contact information provided in your product packaging or visit the official AXEFIT website.

Please have your model number (TT200C) and purchase date available when contacting support.