1. Introduction
Thank you for choosing the Albott 1-Person Infrared Sauna. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your sauna. Please read all instructions carefully before use and retain this manual for future reference.
Important Safety Information
- Ensure the sauna is placed on a level, stable surface.
- Connect to a grounded 110V/15A power outlet.
- Do not use if pregnant, have heart conditions, or other serious medical conditions without consulting a physician.
- Keep children and pets away from the sauna during operation.
- Avoid using alcohol or drugs before or during sauna use.
- Stay hydrated by drinking water before, during, and after your sauna session.
Video: This video provides a general overview of a 1-person infrared sauna for home use, highlighting its features and benefits.
2. Setup and Assembly
The Albott 1-Person Infrared Sauna features a modular design for easy assembly. Two people are recommended for installation.
Unpacking and Component Identification
Carefully unpack all components and verify against the parts list. The accessories and screws are typically located under the top dust plate.
Image: All sauna components laid out for assembly, including various wooden panels, bench, and accessories.
Assembly Steps
- Place the Bottom Board: Position the bottom board on a flat, stable surface.
- Install Back Board: Carefully align and attach the back board to the bottom board. Ensure it is stable.
- Install Side Panels: Attach the left and right side panels using the built-in buckles. Ensure all connections are secure.
- Install Bench Support and Bench: Place the bench support board, then the bench. Connect the power supply for the under-seat heater to the socket underneath the bench.
- Install Door Panel: Carefully align the door panel with the clips on the front of the sauna and tighten. Note: This step requires someone to hold the door panel to prevent instability.
- Install Top Board: Flip out the power cords on each side panel. Place the top board onto the assembled sauna structure, ensuring all wires are properly routed and connected. Connect the top panel wiring.
- Install Top Dust Cover: Place the top dust cover over the top board and secure it using the provided screws.
- Install Door Handle: Attach the wooden door handle to the glass door. The handle may include a slot for holding a mobile phone or tablet.
- Install Accessories: Install the cup holder, backrest, and towel rack as desired.
Video: This video demonstrates the step-by-step installation process for the Albott 1-Person Infrared Sauna, showing how to assemble the panels, connect wiring, and install the door and accessories.
Video: This video provides an installation guide for a similar small infrared sauna, illustrating the general assembly process for modular sauna units.
3. Operating Instructions
Your Albott Infrared Sauna is designed for ease of use with an intuitive LCD control panel and integrated features.
Powering On and Temperature Control
- Ensure the sauna is properly plugged into a 110V/15A outlet.
- Use the LCD control panel to power on the sauna.
- Set your desired temperature (up to 149°F / 65°C) and session duration (0-60 minutes).
- Allow 15-25 minutes for the sauna to preheat. In colder weather, preheating may take longer to reach 140°F (60°C).
Image: The LCD control panel for managing sauna settings, including temperature, time, and entertainment options.
7-Color Light Therapy (Chromotherapy)
The sauna includes a 7-color light therapy system. Use the control panel to select your preferred color or cycle through them. Each color offers unique benefits:
- Red: May assist in reducing inflammation and boosting vitality.
- Blue: May support a calming atmosphere and aid sleep.
- Green: May help restore balance.
- Yellow: May assist in boosting energy.
- Other colors deliver unique benefits to support emotional balance.
Image: The therapeutic lighting system with 7 colors, each associated with different wellness benefits.
Entertainment Features
- Bluetooth Speakers: Connect your device via Bluetooth to enjoy music or podcasts during your session.
- LED Reading Light: Provides sufficient lighting for reading.
- Oxygen Bar: Ensures proper airflow and enhances the sauna experience.
- Foot Warmer: Enjoy deeply relaxing warmth from the exclusive foot heating zone to improve circulation and comfort.
Image: Intelligent entertainment features including Bluetooth speakers, LED reading light, and oxygen bar.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Albott Infrared Sauna.
- Cleaning: Wipe down the interior and exterior wood surfaces with a damp cloth after each use. Avoid harsh chemicals or abrasive cleaners.
- Wood Care: The Canadian Hemlock wood is durable. Avoid excessive moisture to prevent warping or damage.
- Glass Care: Clean the tempered glass door with a non-abrasive glass cleaner.
- Heater Panels: Do not touch the heater panels directly during operation. Ensure they are free from obstructions.
- Ventilation: Ensure the roof vent is clear for proper airflow.
5. Troubleshooting
If you encounter any issues with your sauna, refer to the following common troubleshooting steps:
- Sauna not heating:
- Check if the power cord is securely plugged into a working outlet.
- Ensure the control panel is powered on and the temperature/time settings are correctly configured.
- Verify all internal wiring connections are secure.
- Temperature not reaching desired level:
- Allow sufficient preheating time, especially in colder environments.
- Ensure the door is properly closed and the door seal strip is intact to prevent heat loss.
- Control panel not responding:
- Try turning the sauna off and on again at the main power switch.
- Check the power connection to the control panel.
- Bluetooth not connecting:
- Ensure Bluetooth is enabled on your device and the sauna's control panel.
- Move your device closer to the sauna.
For issues not covered here, please contact customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | SNF001 |
| Product Dimensions | 32.28 x 32.28 x 66.14 inches |
| Item Weight | 156 pounds |
| Material Type | Canadian Hemlock Wood, Safety-Tempered Glass |
| Power | 1260W / 110V (15 Amps) |
| Heater Type | 7 Carbon Infrared Panels, Foot Warmer |
| Max Temperature | 149°F (65°C) |
| Special Features | 7-Color Light Therapy, Dual Bluetooth Speakers, LED Reading Light, LCD Control Panel, Roof Vent, Oxygen Bar |
Image: Detailed product dimensions and key technical specifications.
7. Warranty and Support
Your Albott Infrared Sauna comes with a standard return policy. For specific warranty details, please refer to the product documentation included with your purchase or contact the manufacturer directly.
- Return Policy: 30-day easy returns (as per Amazon policy).
- Customer Support: For assistance with assembly, operation, or troubleshooting, please contact Albott customer support. Contact information can typically be found on the product packaging or the official Albott website.
- Protection Plans: Extended protection plans may be available for purchase separately (e.g., 2-Year Protection Plan).