Introduction
The Setpower RF20 Insulated Protective Cover is designed specifically for the Setpower RF20 Portable Refrigerator Freezer. This cover provides enhanced insulation, protection against physical damage, and convenient access to your refrigerator's features.
Key benefits include:
- Enhanced Insulation: The premium thermal barrier helps prevent cold air leakage, improving cooling performance and reducing power consumption from your AC outlet or external battery.
- Protection: Shields your RF20 car freezer from scratches, bumps, and sunlight damage, helping to maintain its appearance and longevity.
- Convenient Access: Designed for easy installation and removal, allowing full functionality of the refrigerator without needing to remove the cover.
Setup and Installation
Follow these steps to properly install the protective cover on your Setpower RF20 Portable Refrigerator Freezer.
- Ensure your Setpower RF20 refrigerator is clean and free of debris before installing the cover.
- Carefully slide the RF20 refrigerator into the protective cover from the top opening. Ensure the cover aligns with the refrigerator's shape and features.
- Adjust the cover to ensure a snug fit. The cover is designed to perfectly fit the RF20 model.
- Secure any zippers or fasteners to ensure the cover is fully enclosed around the refrigerator.
Image: The Setpower RF20 Insulated Protective Cover, showing its dimensions and how it fits the RF20 refrigerator. The cover measures approximately 24.3 inches in length, 13.1 inches in width, and 11.9 inches in height.
Image: Comparison of the Setpower RF20 refrigerator without the protective cover (left) and with the protective cover installed (right), highlighting the added protection and insulation.
Operating Instructions
The protective cover is designed to allow full functionality of your RF20 refrigerator while installed.
- Accessing Controls: A transparent area on the cover's surface allows you to view and regulate the temperature and other settings on the refrigerator's control panel without removing the cover.
- Power Cord Access: The cover features dedicated power cord inlets and extra side pockets for convenient storage and routing of AC/DC power cords.
- Lid Access: To open the refrigerator lid, simply lift the designated flap on the cover. The portable lid design ensures easy opening and closing.
- Ventilation: Mesh vents are integrated into the cover's design to ensure proper airflow around the refrigerator's cooling components.
Image: Detailed view of the cover's design features, including the transparent control panel window, power cord inlets, mesh vents, built-in handle cutouts, reserved battery pocket, and fixing rings.
Image: Illustration of the portable lid design, showing how the cover's flap can be easily opened and closed to access the refrigerator's interior. The design includes high-quality Velcro for secure closure.
Maintenance
Proper care will extend the life and effectiveness of your protective cover.
- Cleaning: The cover is made from easy-to-clean materials. Wipe down with a damp cloth and mild soap as needed. Avoid harsh chemicals or abrasive cleaners that could damage the fabric.
- Storage: When not in use, ensure the cover is clean and dry before storing it in a cool, dry place away from direct sunlight.
- Inspection: Periodically inspect the cover for any signs of wear, tears, or damage to the zippers and fasteners.
Image: Diagram illustrating the three layers of protection: 420D Silver gray fabric, 6MM pearl cotton padding for dent and scratch protection, and galvanized aluminum for enhanced thermal insulation. Also shown are a storage bag for battery, abrasion-resistant PVC base, and the easy-to-clean texture of the fabric.
Troubleshooting
This section addresses common questions or issues related to the protective cover.
- Cover does not fit: Ensure you have the correct cover model (RF20 Cover) for your Setpower RF20 Portable Refrigerator Freezer.
- Reduced Insulation Performance: Verify that the cover is properly installed and all zippers/fasteners are closed to maximize its insulating properties. Ensure no gaps are present.
- Difficulty Accessing Controls: Confirm the transparent window is correctly aligned over the refrigerator's control panel.
For issues related to the Setpower RF20 Portable Refrigerator Freezer itself, please refer to its dedicated user manual.
Specifications
| Feature | Detail |
|---|---|
| Brand | Setpower |
| Model | RF20 Cover |
| Compatible Refrigerator Model | Setpower RF20 |
| Item Weight | 1.8 pounds |
| Product Dimensions (L x W x H) | 14.96 x 15.74 x 6.7 inches |
| Color | Grey |
| Material Layers | 420D Silver gray fabric, 6MM pearl cotton, Galvanized aluminum |
| Special Features | Transparent control panel window, power cord inlets, mesh vents, side pockets, portable lid design |
Warranty and Support
For warranty information and customer support regarding your Setpower RF20 Insulated Protective Cover, please refer to the official Setpower website or contact their customer service directly. Keep your purchase receipt for warranty claims.
Setpower Official Website: Visit the Setpower Store on Amazon
