PELONIS 7-Inch Pedestal Air Circulator User Manual

Introduction

Thank you for choosing the PELONIS 7-Inch Pedestal Air Circulator. This manual provides important information for the safe operation, assembly, maintenance, and troubleshooting of your new fan. Please read it thoroughly before use and keep it for future reference.

Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this fan.
• Use this fan only as described in this manual. Other uses not recommended may cause fire, electric shock, or injury to persons.
• To reduce the risk of fire or electric shock, do not expose this fan to water or rain.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• Always unplug the fan when not in use, when moving from place to place, before putting on or taking off parts, and before cleaning.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fan.
• Do not block air openings or operate where openings may become blocked.
• A fan has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this fan only on a flat, stable surface to prevent tipping.
• This fan is intended for household use only.

Package Contents

Please check the package contents upon opening to ensure all parts are present and undamaged:

• Fan Head Assembly
• Adjustable Stand Pole
• Base
• Mounting Nut (pre-attached to stand pole)
• User Manual

Assembly Instructions

Your PELONIS Air Circulator is designed for easy, tool-free assembly. Follow these steps to set up your fan:

1. Attach the Base: Align the internal threads of the stand pole over the threaded section of the base. Rotate the stand pole clockwise until it is snug and securely attached to the base.
   

   Image: Step 1 of assembly, showing the fan stand being twisted onto the circular base.

2. Mount the Fan Head: Place the fan head motor onto the internal rod at the top of the stand pole. Tighten the pre-attached nut to secure the fan head firmly in place.
   

   Image: Step 2 of assembly, illustrating the fan head being placed onto the pole and secured with a nut.

3. Align the Grilles (if disassembled): If the fan grilles are separated, align the front grille snaps with the top line of the rear grille and press firmly until they click into place.
   

   Image: Step 3 of assembly, demonstrating the alignment of the fan grilles.

4. Adjust Height: The fan can be adjusted for use as a tabletop or standing fan. Extend or retract the stand pole to your desired height.
   

   Image: The fan shown in four different height configurations, from compact tabletop to full-height pedestal, highlighting its adjustable design.

Operating Instructions

Familiarize yourself with the fan's controls for optimal performance.

Power On/Off

Locate the power button on the fan's control panel. Press once to turn the fan on, and press again to turn it off.

Speed Settings

The fan offers 3 adjustable speed settings. Use the speed control button to cycle through Low, Medium, and High speeds to achieve your desired airflow.

Oscillation

The PELONIS Air Circulator features wide-angle oscillation for comprehensive air distribution:

• Horizontal Oscillation: Press the oscillation button to activate 90° horizontal oscillation, sweeping air across a wide area.
• Vertical Oscillation: The fan also supports 75° vertical oscillation, allowing you to direct airflow up or down.

Image: The fan head demonstrating its ability to oscillate both horizontally (90 degrees) and vertically (75 degrees), ensuring wide air coverage.

Airflow Performance

Experience powerful airflow with a wind speed of 15ft/s, capable of reaching up to 60ft, ensuring efficient air circulation throughout your space.

Image: A visual representation of the fan's powerful airflow, showing air reaching a significant distance across a living space.

Maintenance and Cleaning

Regular cleaning will help maintain your fan's performance and extend its lifespan. Always unplug the fan before cleaning.

Exterior Cleaning

Wipe the exterior surfaces of the fan with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish.

Blade Cleaning

The fan is designed for easy disassembly to clean the blades. Carefully remove the front grille (refer to assembly instructions for reverse steps if needed). Wipe the fan blades with a soft, damp cloth. Ensure all parts are completely dry before reassembling and operating the fan.

Image: The fan's blades being cleaned under water, illustrating the compact and easy-to-clean design.

Troubleshooting

If your fan is not operating correctly, please check the following common issues before contacting support:

Specifications

Warranty and Support

PELONIS products are manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official PELONIS website. Please retain your proof of purchase for any warranty claims.