1. Introduction
Thank you for choosing the VECYS LYCZ628-B 3-in-1 Bottom Loading Ice Maker Water Dispenser. This innovative appliance combines the functions of providing cold water, hot water, and ice, operating simultaneously to meet your diverse hydration and cooling needs. Designed for convenience and safety, this manual provides essential information for proper setup, operation, and maintenance to ensure optimal performance and longevity of your unit.
Figure 1: Overview of the VECYS 3-in-1 Water Dispenser's capabilities.
2. Safety Information
Please read all safety instructions carefully before operating the appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always plug the unit into a grounded electrical outlet.
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Keep children away from the hot water dispenser. The unit features a child safety lock for hot water dispensing.
- Ensure proper ventilation around the unit. Do not block any ventilation openings.
- Unplug the appliance before cleaning or performing any maintenance.
- Do not operate the appliance if the power cord or plug is damaged.
- This appliance is for indoor use only.
Figure 2: The anti-scald safety lock feature helps prevent accidental hot water dispensing by children.
3. Product Overview
The VECYS LYCZ628-B is a sophisticated bottom-loading water dispenser with integrated ice making capabilities. Key components include:
- Control Panel: Intuitive touch controls for hot water, fresh water, cold water, child lock, lack of water indicator, ON/OFF, ice making, ice volume, and energy saving modes.
- Dispensing Area: Separate outlets for water and ice, with an LED light for illumination.
- Drip Tray: Removable for easy cleaning.
- Bottom Loading Compartment: Houses the water bottle and features a durable 304 stainless steel water pipe.
- Ice Maker: Produces bullet-shaped ice cubes.
- High-Performance Compressor: Ensures efficient cooling and ice production.
Figure 3: Front view of the VECYS water dispenser, highlighting its sleek design.
4. Setup
Follow these steps to set up your VECYS water dispenser:
- Unpacking: Carefully remove the appliance from its packaging. Inspect for any shipping damage.
- Placement: Place the unit on a flat, stable surface, away from direct sunlight and heat sources. Ensure adequate clearance around the unit for ventilation.
- Water Bottle Installation:
- Open the bottom loading compartment door.
- Insert the water pipe into a 3 or 5-gallon water bottle. The water pipe is made of 304 stainless steel for durability and hygiene.
- Slide the water bottle into the compartment and close the door securely.
- Power Connection: Plug the power cord into a grounded electrical outlet.
- Initial Priming: Before dispensing, allow the unit to fill its internal tanks. This may take a few minutes. Dispense a cup of cold water to ensure the system is primed and air is purged.
Video 1: Demonstrates the bottom loading water bottle installation and initial operation of the VECYS 3-in-1 water dispenser, including ice making and water dispensing.
5. Operating Instructions
Your VECYS dispenser offers hot, cold, and room temperature water, along with ice production.
5.1 Water Dispensing
- Cold Water: Press the "Cold water" button on the control panel. The water outlet has an LED light for visibility.
- Fresh Water (Room Temperature): Press the "Fresh water" button on the control panel.
- Hot Water: For safety, hot water dispensing requires a two-step process. First, press the "Child lock" button, then press the "Hot water" button to dispense.
Figure 4: Dispensing options for hot, cold, and fresh water, along with ice.
5.2 Ice Making Function
To activate the ice making function, press the "Making ice" button on the control panel. The unit can produce up to 22 lbs of bullet-shaped ice daily, with each cycle yielding 9 pieces in approximately 6-8 minutes.
- Ice Dispensing: Place your cup against the ice dispensing panel to activate the ice chute.
- Ice Volume Indicator: The "Ice volume" indicator lights on the panel show the current ice level.
Figure 5: Details on the ice making speed and capacity.
5.3 Energy Saving Mode
The unit features an "ECO" energy-saving mode. Press the "Energy saving" button to activate this mode, which optimizes power consumption.
6. Maintenance
Regular maintenance ensures the longevity and hygiene of your VECYS water dispenser.
- Self-Clean Function: The built-in self-clean function simplifies the cleaning process. Refer to the control panel for activation.
- Drip Tray: Regularly empty and clean the drip tray to prevent overflow and bacterial growth.
- Exterior Cleaning: Wipe the exterior with a soft, damp cloth. Avoid abrasive cleaners.
- Internal Cleaning: For thorough internal cleaning and disinfection, consider using specialized cleaning capsules designed for water dispensers.
7. Troubleshooting
If you encounter issues with your VECYS water dispenser, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No ice or cold water production. | Insufficient water in the bottle, unit not powered on, or internal malfunction. | Ensure water bottle is full and properly installed. Check power connection. If problem persists, contact customer support. |
| Cold water button unresponsive or continuous dispensing. | Sensor issue or temporary glitch. | Unplug the machine for 30 seconds, then plug it back in to reset. If the issue continues, contact customer support. |
| Water has a plastic taste. | New unit residue or insufficient initial flushing. | Flush the system multiple times by dispensing and discarding several gallons of water. Perform a thorough internal cleaning. |
| "Lack of water" light is on, but bottle is full. | Water pipe not properly inserted or sensor issue. | Re-insert the water pipe firmly into the bottle. Ensure the bottle is correctly seated in the compartment. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | LYCZ628-B |
| Product Dimensions (D x W x H) | 17.7"D x 14.4"W x 44.1"H |
| Water Refrigeration Capacity | 2L (0.53 Gallon)/Hr |
| Water Tank Capacity | 1.5L (0.4 Gallon) |
| Water Temperature Range | 42°F - 212°F |
| Ice Making Capacity | 22LBS/24Hrs |
| Ice Making Time | 6-8 mins per cycle |
| Ice Storage | 1.1LBS |
| Compatible Bottle Sizes | 3 to 5-gallon water bottles |
| Manufacturer | AQUART |
Figure 6: Product dimensions and suggested usage environments.
Figure 7: High-performance compressor details.
9. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact VECYS customer service. While specific warranty details are not provided in this manual, VECYS is committed to customer satisfaction. Please retain your proof of purchase for any service requests.
For additional support and information, you may visit the official VECYS store on Amazon: VECYS Store