Bushnell Golf LPi Personal Launch Monitor

Introduction

The Bushnell Golf LPi Personal Launch Monitor is engineered to provide tour-validated ball and club data for indoor golf simulation. This device is optimized for indoor use, offering precise measurements to enhance your practice and game analysis. It aims to deliver a true-to-life golf simulation experience with high accuracy.

Figure 1: Front view of the Bushnell Golf LPi Personal Launch Monitor.

Figure 2: Side view of the Bushnell Golf LPi Personal Launch Monitor.

What's Included

Your Bushnell Golf LPi Personal Launch Monitor package includes the following components:

• Launch Pro Indoor Device
• Power Cord/A/C Power Adapter
• USB-C Cable
• 48pc Club Marker Pack
• Alignment Stick
• Ethernet Cable

Setup

Follow these steps to set up your LPi Personal Launch Monitor:

1. Placement: Position the Launch Pro Indoor Device on a stable, flat surface approximately 7-8 feet behind the ball. Ensure there is clear line of sight to the ball and the hitting area.
2. Power Connection: Connect the power cord to the device and plug it into a standard electrical outlet.
3. Ethernet Connection: Connect the Ethernet cable from the device to your computer or network router. This ensures a stable data connection for optimal performance.
4. Software Installation: Install the required golf simulation software (e.g., FSX Play) on your computer. Follow the software provider's instructions for installation and account setup.
5. Device Alignment: Use the included alignment stick to ensure the device is correctly aligned with your target line. Refer to the software interface for visual alignment guides.
6. Club Markers: Apply the 48pc Club Marker Pack to your clubs as instructed by the software to enable accurate club data tracking.

Figure 3: The LPi device positioned behind a golf ball on a mat, ready for use.

Figure 4: Close-up of the rear of the LPi device showing power and Ethernet cable connections.

Operating Instructions

Once your LPi Personal Launch Monitor is set up and connected, follow these steps to begin your golf simulation:

1. Launch Software: Open your preferred golf simulation software (e.g., FSX Play) on your connected computer.
2. Device Recognition: Ensure the software recognizes the LPi device. The device status indicator should confirm a successful connection.
3. Select Mode: Choose your desired mode within the software, such as practice range, course play, or skill challenges.
4. Prepare to Hit: Place a golf ball on the hitting mat within the designated tracking area.
5. Swing: Execute your golf swing. The LPi device will capture ball and club data instantly.
6. Review Data: View your shot data, including ball speed, club speed, launch angle, spin, and more, directly on your computer screen or connected display.

Figure 5: A user interacting with the golf simulation application on a smartphone, which is docked on the LPi device.

Figure 6: The golf simulation application interface showing comprehensive ball and club data metrics post-shot.

Features

• Indoor-Optimized with Pay-As-You-Go Software: Purpose-built for indoor simulation, allowing realistic rounds in your home with flexible software subscription options.
• Tour-Level Ball & Club Data Accuracy: Engineered to minimize ambient light interference and tight hitting-space challenges, ensuring consistent, reliable measurements on every swing.
• 14-Day FSX Play "Gold" Trial Included: Get started with 25 immersive courses powered by the Unity engine, with options to upgrade to platforms like GSPro or FSX 2020.
• Practice Anytime—Rain or Shine: Train 24/7 with precise indoor performance, ensuring weather, daylight, and course conditions never interrupt your progress.
• Complete Data for Serious Practice: Track key metrics like ball speed, club speed, launch angle, and more, all in a streamlined, simulation-ready experience.

Specifications

Maintenance

To ensure the longevity and optimal performance of your Bushnell Golf LPi Personal Launch Monitor, adhere to the following maintenance guidelines:

• Cleaning: Regularly wipe the device with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Cable Care: Inspect power and Ethernet cables periodically for any signs of wear or damage. Replace damaged cables immediately to prevent electrical hazards or connectivity issues.
• Software Updates: Keep your golf simulation software updated to the latest version to benefit from performance improvements and new features.

Troubleshooting

If you encounter issues with your LPi Personal Launch Monitor, consider the following troubleshooting steps:

• No Power: Ensure the power adapter is securely connected to both the device and a working electrical outlet.
• No Data/Connectivity Issues: Verify that the Ethernet cable is properly connected to the device and your computer/router. Check your network settings and ensure the simulation software is running correctly.
• Inaccurate Readings: Confirm the device is correctly positioned and aligned according to the setup instructions. Ensure club markers are properly applied and visible to the device's sensors. Check for any obstructions in the tracking area.
• Software Glitches: Restart the golf simulation software and/or your computer. Ensure your software is up-to-date.

For persistent issues, refer to the detailed troubleshooting section within your golf simulation software's help documentation or contact Bushnell Golf customer support.

Warranty and Support

The Bushnell Golf LPi Personal Launch Monitor comes with a 1 Year Limited Warranty. For warranty claims, technical support, or additional assistance, please contact Bushnell Golf customer service through their official website or the contact information provided in your product packaging.

For more information and resources, visit the Bushnell Store on Amazon.