HUMMINGBIRD Pro Series MK10 + MK11 Hair Clippers and Trimmer Set Instruction Manual

1. Introduction

Thank you for choosing the HUMMINGBIRD Pro Series MK10 + MK11 Hair Clippers and Trimmer Set. This professional-grade kit is designed for precise hair cutting and trimming, suitable for both professional barbers and home users. It features advanced technology for optimal performance and user convenience.

Key features include:

• MK10 Clipper: Equipped with a 9000 RPM brushless motor and DLC-coated blade for smooth, snag-free cutting.
• MK11 Trimmer: Features a zero-gapped T-blade for clean lines and detailed work.
• Cordless & USB-C Rechargeable: Both devices offer modern, cable-free operation with fast USB-C charging.
• Real-Time Battery Display: Digital displays show remaining battery life and RPM monitoring.
• Comprehensive Kit: Includes various guard sizes, barber accessories, and a premium carry case.

2. Product Overview and Components

Your HUMMINGBIRD Pro Series kit includes the following components:

2.1. MK10 Professional Hair Clipper

Image: The MK10 Professional Hair Clipper, showcasing its 9000 RPM magnetic motor, DLC blade, adjustable taper lever, digital display, and USB-C charging port.

• Motor: 9000 RPM magnetic motor for powerful and quiet operation.
• Blade: DLC-coated blade for durability, sharpness, and cool operation.
• Taper Lever: Adjustable for precision cutting control.
• Display: Digital display for battery life and RPM monitoring.

2.2. MK11 Professional Hair Trimmer

Image: The MK11 Professional Hair Trimmer, highlighting its 7000 strokes per minute, zero-gap T-blade, black ceramic T-blade, USB-C charging, and digital display.

• Blade: Zero-gapped T-blade for ultra-close, precise cuts.
• Motor: Powerful motor for efficient trimming.
• Display: Digital display for battery life and RPM monitoring.

2.3. Included Accessories

Image: All components of the HUMMINGBIRD Pro Series kit, including the MK10 clipper, MK11 trimmer, various guards, charging cables, comb, cape, brush, oil, and carry case.

• 8 Clipper Guard Sizes (3-25mm) for MK10.
• 4 Trimmer Guard Sizes (1-4mm) for MK11.
• Barber Comb.
• Barber Cape.
• Blade Oil.
• Cleaning Brush.
• 2x Braided USB Type-C Charging Cables.
• Premium Carry Case.

3. Setup

3.1. Initial Charging

Before first use, fully charge both the MK10 Clipper and MK11 Trimmer. Connect the provided USB-C charging cables to the devices and a compatible USB power adapter (not included). The digital display will indicate charging progress and battery level. Charging time is approximately 120 minutes for a full charge.

3.2. Attaching Guards

Select the desired guard size for your haircut. Align the guard with the blade of the clipper or trimmer and push firmly until it clicks into place. Ensure the guard is securely attached before operating the device.

Image: A detailed view of the various clipper guards (3-25mm) for the MK10 and trimmer guards (1-4mm) for the MK11.

4. Operating Instructions

4.1. General Use

Ensure the device is charged and the appropriate guard is attached. Press the power button to turn on the clipper or trimmer. For optimal performance, always start with clean, dry hair.

4.2. MK10 Clipper Operation

• Taper Lever: Use the adjustable taper lever on the side of the MK10 clipper to fine-tune cutting lengths between guard sizes for seamless blending and fading.
• Turbo Mode: The MK10 features a turbo mode for increased power when cutting through thicker hair. Activate it by pressing the designated button.
• Hair Cutting: Guide the clipper against the direction of hair growth for an even cut. Use the barber comb to lift hair for easier cutting.

4.3. MK11 Trimmer Operation

• Detailing and Edging: The zero-gapped T-blade is ideal for creating sharp lines, edging around the hairline, and detailing beards. Use without a guard for the closest trim.
• Beard Trimming: Attach the appropriate trimmer guard to achieve desired beard length.

5. Maintenance

5.1. Cleaning the Blades

After each use, turn off the device and remove the guard. Use the provided cleaning brush to remove any loose hair from the blades. For a more thorough cleaning, the blades can be carefully detached and rinsed under water (ensure the device body does not get wet if not specified as waterproof). Allow blades to air dry completely before reattaching.

5.2. Oiling the Blades

To maintain optimal cutting performance and blade longevity, apply a few drops of the included blade oil to the blades before or after every use. Turn on the device for a few seconds to distribute the oil evenly, then turn it off and wipe off any excess oil.

6. Troubleshooting

If you experience any issues with your HUMMINGBIRD Pro Series Hair Clippers and Trimmer Set, please refer to the following common solutions:

• Device not turning on: Ensure the device is fully charged. Check the charging cable for any damage.
• Poor cutting performance: Clean and oil the blades. Ensure the correct guard is securely attached. If blades are dull, consider professional sharpening or replacement.
• Excessive noise or vibration: Clean and oil the blades. Ensure no hair or debris is obstructing the motor or blade mechanism.

For further assistance, please contact HUMMINGBIRD Customer Service.

7. Specifications

8. Warranty & Support

At HUMMINGBIRD, customer satisfaction is a top priority. Our dedicated team, based in New Jersey, is available to answer any questions or resolve any issues you may have regarding your purchase.

Please refer to the product packaging or contact our customer service for specific warranty details.

9. Safety Information

• Always unplug or turn off the device before use, cleaning, or maintenance.
• Avoid contact with eyes.
• Keep away from water. Do not immerse the device in water.
• Not intended for use by children under 13 years of age without adult supervision.
• Keep out of reach of children.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.